arXiv:2607.05704v1 Announce Type: new Abstract: Large language models (LLMs) can generate neural-network modifications, but unrestricted generation is often invalid or harmful. This paper studies a narrower setting: improving a weak target model using a stronger same-family source model from a neural-network database. We propose a source-guided candidate-generation protocol with non-source controls, source-conditioned candidates, and a no-LLM hp_copy ablation under equal evaluation budgets. The protocol reports validity separately from accuracy and selects the best valid candidate only when it improves the target. On CIFAR-10, the strongest source-guided candidate reaches 0.5049 accuracy versus 0.2398 for the best non-source candidate, a +0.2651 advantage, while improving a weak target originally at 0.1254; a five-epoch check preserves the gain at 0.7686 versus 0.4839. On SVHN AlexNet with DeepSeek-Coder-6.7B, source-guided transfer reaches 0.7880 versus 0.2254, a +0.5626 advantage; a fresh repeat reaches 0.8069 versus 0.2509, a +0.5560 advantage. Direct source-recipe copy produces 0.1959 on SVHN AlexNet, matching the original target, while hp_transfer reaches 0.7880, showing that the LLM adapts rather than copies the source recipe. Family-level analysis shows the clearest positive signals for AlexNet, with 6/8 wins across SVHN, Imagenette, and CelebA-Gender, and alt_nn1, with 8/10 wins on CIFAR-10.
Science Journals
arXiv:2607.06032v1 Announce Type: new Abstract: In cross-modal remote sensing image-text retrieval (CMRSITR), test-time remote sensing (RS) images and textual descriptions may deviate from well-curated benchmark conditions due to sensor- and atmosphere-related image degradations and text-side RS-vocabulary heterogeneity. Under such non-ideal conditions, existing CMRSITR methods may produce unreliable retrieval results because they perform retrieval with full certainty for each query and do not distinguish the varying uncertainty across queries. To address this issue, we propose an evidential learning-based CMRSITR (ELC) method for uncertainty-aware retrieval. During the training phase of ELC, evidential learning (EDL) is employed to model the inter-modal correspondences between RS images and textual descriptions as Dirichlet distributions, from which the uncertainty of each query can be obtained. Based on the EDL outputs, uncertainty-correctness alignment learning (UCL) is introduced to align the estimated uncertainty with retrieval correctness, encouraging high uncertainty for incorrect retrieval and low uncertainty for correct retrieval. Furthermore, intra-modal relationship learning (RL) distills the intra-modal similarity structure from pretrained mentor encoders for the trainable encoders, thereby making the Dirichlet distributions modeled by EDL more discriminative. In the test phase of ELC, the estimated uncertainty is compared with a threshold determined by a fixed deferral ratio, where low-uncertainty queries are directly returned and high-uncertainty queries are refined by RS-aware test-time augmentation (RS-TTA). Experimental results demonstrate that ELC achieves competitive retrieval performance compared with state-of-the-art CMRSITR methods and provides stronger robustness under the evaluated RS-specific degradations, including sensor- and atmosphere-related image perturbations and RS-vocabulary heterogeneity.
arXiv:2607.06141v1 Announce Type: new Abstract: Cryptocurrency wallets are the primary interface for managing pseudonymous blockchain addresses, viewing balances, and interacting with Web3 applications. Although users typically assume that their addresses remain independent of each other unless intentionally revealed, modern wallets routinely communicate with both blockchain infrastructure and decentralized applications (dApps), generating network-side and web-side signals that may undermine this assumption. In this paper, we identify and formalize five privacy threats that arise directly from wallets interacting with the network and the web browser. Using large-scale dynamic measurements of 85 of the most popular Chrome Web Store browser-extension wallets (representing 35.16 million users), we observe that routine remote procedure call (RPC) operations leak structural links between a user's addresses; that the majority of Ethereum wallets implement permission revocation inconsistently and continue to expose previously revoked addresses across sessions; and that many wallets inject their provider interfaces into cross-origin iframes, enabling passive cross-site tracking beyond dApps and potentially real-world identity deanonymization without user interaction. Taken together, our results show that these wallet behaviors leak sensitive information that can be used to link multiple addresses to the same user, track wallet users across sessions and sites, and connect their browsing activity to their on-chain wealth. We discuss practical mitigations and show that many of these threats can be substantially reduced through improved wallet implementation, stronger privacy considerations in ecosystem standards, and stricter controls over provider exposure. Our results highlight the need for standardized, privacy-preserving wallet architectures.
arXiv:2607.06239v1 Announce Type: new Abstract: Animals navigating complex vertical environments must secure stable footholds, a challenge for species without feet. While arboreal climbing has evolved repeatedly in snakes, the physical mechanisms they use to scale broad, nearly flat surfaces remain poorly understood. By measuring three-dimensional body kinematics and per-contact forces on a smooth vertical wall with protruding posts, we show that cornsnakes climb by dynamically balancing forces across a highly redundant network of 5 to 16 simultaneous contacts--far exceeding the three contacts minimally required for physical stability. Using a computational model and a robotic climber, we demonstrate that while simple body undulations and passive friction are mechanically sufficient to climb this terrain, snakes systematically deviate from this passive baseline. While downward climbing relies primarily on friction, ascending snakes actively generate positive mechanical work at their contacts to propel themselves. Furthermore, we found that whenever a snake engages a new contact, it triggers a stereotyped, system-wide redistribution of force that seamlessly integrates the new foothold without disrupting whole-body balance. These results reveal how a continuous, flexible body can transform sparse environmental features into a robust, fault-tolerant network. This mechanism provides a biomechanical framework for understanding the repeated evolution of limbless climbing and offers physical principles for designing agile robots for unstructured terrain.
arXiv:2607.05970v1 Announce Type: new Abstract: Dataset search depends heavily on metadata, making LLM-generated metadata a consequential form of synthetic content in retrieval systems. We study six metadata-generation settings for RDF datasets, ranging from simple rewriting to profile-grounded and agentic graph-based generation, and evaluate them jointly for retrieval effectiveness and faithfulness. Unconstrained metadata rewriting delivers the strongest retrieval gains over the original metadata, but it is also the least faithful, showing that search improvements can be driven by unsupported semantic expansion. More grounded settings substantially improve faithfulness, and profile-grounded rewriting provides the most balanced trade-off between retrieval effectiveness and grounding. These findings position synthetic metadata as a system-level IR problem in which effectiveness, provenance, and trust must be evaluated together.
arXiv:2607.06296v1 Announce Type: new Abstract: This paper presents the design and evaluation of a maintainable hybrid generative architecture for automated music harmony generation from melody. The proposed system combines quantum-inspired candidate exploration over overlapping melodic contexts with explicit rule-based optimization to balance generative flexibility and structural control. The architecture is evaluated using explicit and reproducible metrics covering structural coherence, functional agreement, harmonic similarity, and robustness. The results show that the proposed approach produces harmonizations that preserve tonal structure and cadential behavior while allowing multiple valid harmonic realizations. Furthermore, the optimization layer improves structural coherence, stability, and predictability without requiring a training corpus. The study demonstrates that transparent and controllable hybrid generative systems can be systematically designed and evaluated within the context of Information Systems Development.
arXiv:2607.02967v2 Announce Type: replace Abstract: Large language models remain limited as continual learning systems, motivating renewed interest in Sparse Distributed Memory (SDM) as an explicit online episodic memory. CALM (Nechesov and Ruponen, 2025) identifies its threshold-binary encoder as an open design question. This paper evaluates rank-order N-of-M encoding (Furber et al., 2007) as an alternative. We make three contributions. First, a faithful reimplementation validates the published architecture by confirming exact equivalence between WheelSDM and RankOrderSDM (cosine similarity 1.0000 across 10 seeds) and reproducing the documented divergence of RDLIF neurons under interference. Second, multi-seed capacity experiments show RankOrderSDM outperforming StandardSDM by 13.4 percentage points at saturation in the scaled configuration and by 0.8 percentage points at the published architecture scale. Third, BER robustness experiments disentangle representation and learning effects, showing that the large robustness gain arises primarily from the interaction of rank-order encoding with MAX-Hebbian learning, while the encoder alone provides only a small advantage under matched learning conditions. Experiments on GloVe-100 embeddings confirm this small but consistent encoding benefit on real structured data, whereas sentence embeddings exhibit a ceiling effect at low memory load. A secondary analysis shows that idealized rank-order encoding requires half the component-level encoding energy of SpikingMamba's SI-LIF neurons at four-bit precision, although decoder costs dominate overall system energy. These results identify which components of the original rank-order SDM architecture provide measurable benefits for contemporary memory-augmented AI systems, offering practical guidance for architectures such as CALM.
arXiv:2607.05622v1 Announce Type: new Abstract: We present a unified, memory-bounded GPU realization of equation-of-motion coupled-cluster (EOM-CC) excited-state gradients and interstate nonadiabatic couplings (NACMEs) on a single 8\,GB consumer GPU. Both are built from one contraction directed acyclic graph: the EOM-CC relaxation is the reverse-mode transpose of the forward density build rather than a per-state re-derivation, and an atomic-orbital-direct Laplace-transform $J/K$ kernel, made non-symmetric ($J^x(A,B)\neq J^x(B,A)$) by the transition densities, resolves every energy denominator with no four-index molecular-orbital tensor; a two-sided Davidson returns both eigenvectors from one device-resident, spin-pure solve. The pipeline is \emph{validated end to end at small scale}: gradients and NACMEs match finite differences across four spin multiplicities and full configuration interaction to $<\!10^{-12}$ for two electrons, and the excited-state gradient matches the independent \textsc{Psi4} code to $\le\!4.6\times10^{-7}~E_h/a_0$ from \ce{H2O} to aromatic benzene. The kernels and the ground-state solve reach chromophores ($\le\!730$ AO) in 8\,GB, and a frozen-natural-virtual compression lets the eigensolver \emph{execute} a complete excited-state gradient and $Q$--$B$ NACME of the chlorophyll-core chromophore \ce{Mg}-porphine (def2-SVP, $439$ AO) on the card. We present that run as a \emph{capability demonstration} -- executed and translationally invariant to machine zero, but anchored only piece-wise and bounded by a direct convergence study at ${\sim}10^{-2}~E_h/a_0$ -- not a converged spectroscopic result. The validated small-scale capability and the memory-bounded implementation are the contribution.
arXiv:2607.06344v1 Announce Type: new Abstract: While personalisation is becoming a defining capability in human-robot interaction (HRI), the existing literature on responsible personalisation remains fragmented, offering isolated accounts of ethical risks without a structured understanding of how they emerge across interaction contexts. This gap is particularly critical in HRI, where robots' embodiment and social presence can amplify and reshape such risks or generate new types of risks. We present a lifecycle-based and context-sensitive framework for personalised HRI, grounded in an embodiment-aware perspective. The framework combines stages of the personalisation process with interaction characteristics (short-term vs. long-term, open-domain vs. closed-domain), enabling systematic analysis of how risks arise and evolve. Building on this, we conduct an integrative analysis of key ethical risks, including autonomy erosion, biased user modelling, manipulation, dehumanisation, and privacy violations, and examine how they manifest across contexts. We translate these insights into actionable design recommendations and outline open research challenges. By structuring both the design space and risk landscape of personalised HRI, this work provides a foundation for more systematic, transparent, and ethically grounded approaches to personalised robot behaviour.
arXiv:2607.06105v1 Announce Type: new Abstract: High-resolution RGB imagery acquired from low-altitude UAV surveys was processed through a modular pipeline incorporating transformer-based semantic segmentation, connected-component vegetation extraction, fine-grained species classification using a ConvNeXt architecture, and grid-based dominance scoring at 2x2m resolution. The framework targeted two ecologically significant halophytic grasses, Spartina maritima and Puccinellia maritima, and was trained using a curated and manually annotated UAV imagery, along with biodiversity imagery sourced from publicly accessible datasets. In order to identify these plants from the imagery, our segmentation yielded reliable species masks (mean IoU = 0.56; pixel-level accuracy = 0.96), while object-level classification achieved very good discrimination (F1 = 0.99). Dominance estimates closely matched quadrat-based field surveys, with mean absolute differences below 8%, preserving fine-scale spatial structure under realistic survey conditions. The developed system, named EcoVision, establishes a practical foundation for scalable, high-resolution salt marsh monitoring, demonstrating how AI-driven workflows can translate pixel-level predictions into ecologically interpretable metrics.
arXiv:2607.05771v1 Announce Type: new Abstract: The DMRadio-50L experiment is designed to search for axion dark matter in the 5 kHz - 5 MHz frequency range using a lumped-element LC resonator and a toroidal magnet and to serve as a testbed for quantum sensors. This paper describes the custom cryogenic system developed to meet the stringent requirements of the experiment within a standard laboratory environment. The system is designed to cool a 200 kg detector assembly to temperatures as low as 50 mK while providing sufficient cooling power at multiple temperature stages. We present the conceptual design, technical implementation, and measured performance of the hybrid cryogenic system, which combines a horizontal dilution refrigerator with a large vertical payload cryostat.
arXiv:2607.05790v1 Announce Type: new Abstract: Tool-augmented large language models extend their capabilities beyond parametric knowledge through external tools, but tend to invoke them unnecessarily. We investigate whether tool-use decisions have any stable internal representation that can be extracted and manipulated, a question that is non-trivial given that tools exist entirely in context at inference time and have no direct encoding in model weights. We show that steering vectors extracted from heading-anchors positions exert bidirectional causal control over tool-invocation behavior across five open-source models and three domains, suppressing unnecessary tool use most effectively in domains where parametric reasoning suffices. However, geometric analysis reveals that this causal effectiveness does not correspond to clean linear structure: tool-invocation steps exhibit diffuse, bimodal alignment with the suppression vector rather than the consistent negative alignment a linear encoding account would predict, and different tool types recruit largely distinct internal signatures with low cross-tool feature overlap. We hypothesize these geometric properties are indicative of the non-parametric nature of tools, and distinguish tool-use steering vectors from those extracted for parametrically grounded concepts. The relationship between this geometric irregularity and the observed causal effectiveness remains an open question.
arXiv:2607.06162v1 Announce Type: new Abstract: Image outpainting extends an image beyond its original borders, requiring seamless style integration and globally coherent scene completion. Building on the success of diffusion models, recent methods have achieved substantial improvements in visual quality. In practice, however, high-resolution outpainting is commonly performed via progressive expansion around a fixed source image, particularly in artwork scenarios. Despite this progress, existing approaches still suffer from three key limitations: (i) the absence of a reliable global planning mechanism, which leads to structural instability and error accumulation at high resolutions; (ii) limited spatial controllability beyond text prompts, making it difficult to place objects at user-specified locations; and (iii) high inference latency caused by inherently sequential patch generation. To address these issues, we propose a global blueprint-guided two-stage diffusion framework for layout-controllable high-resolution outpainting with efficient parallel synthesis. In Stage 1, we generate a low-resolution global blueprint using a layout adapter that injects bounding-box conditions into a Stable Diffusion inpainting backbone, producing a globally consistent structural plan while extracting global guidance features. In Stage 2, we synthesize high-resolution local patches in parallel by injecting the blueprint-derived global guidance and initializing each patch from the blueprint using the low-frequency preservation property of forward diffusion. This design eliminates sequential dependency while maintaining global coherence. Extensive experiments on large-scale artwork datasets demonstrate improved visual fidelity, stronger semantic consistency, and substantially reduced inference time compared to prior baselines, while uniquely supporting explicit layout control for artwork outpainting.
arXiv:2607.05408v1 Announce Type: new Abstract: The environmental impact of training large language models (LLMs) is increasingly scrutinised, yet most published estimates focus on operational energy and disclose little about manufacturing (embodied) emissions, water consumption, or the underlying highperformance computing (HPC) infrastructure. We present a life cycle assessment (LCA) of the pre-training of Lucie 7B, an open-source multilingual Foundation Model developed by the OpenLLM-France consortium and trained on the NVIDIA H100 partition of the Jean Zay supercomputer operated by IDRIS (CNRS). The assessment is framed by the AFNOR SPEC 2314 "Frugal AI" reference and applies the Labos 1point5 methodology for greenhouse gas(GHG) accounting in computing. The study scope extends from data preparation to model validation, and integrates the full life cycle of the hardware infrastructure: manufacturing (including raw-material extraction), use (compute, temporary storage, system administration, cooling), and end-of-life. We report (i) an annual footprint of 417.5 tCO2eq for the Jean Zay H100 partition, split almost equally between manufacturing and operation; (ii) an effective intensity of 36.7 gCO2eq per H100 GPU-hour; (iii) a total training footprint of 21 tCO2eq for Lucie 7B (574 564 H100 GPU-hours), inclusive of amortised hardware manufacturing; (iv) on-site water consumption of approximately 76m3 for the training campaign and an annual Water Usage Effectiveness (WUE) of 0.07 L/kWh for IDRIS; (v) a heat-reuse factor (ERF) of 0.37 thanks to waste-heat recovery into the urban heating network. The study contributes one of the few publicly documented LCAs of an LLM training campaign that explicitly couples operational data with embodied emissions decomposed by subsystem (compute, storage, power chain, cooling), and discusses the implications for the design of frugal-by-construction AI systems in Europe.
arXiv:2607.05453v1 Announce Type: new Abstract: Parkinson's disease (PD) affects millions worldwide and causes severe motor symptoms. Adaptive deep brain stimulation (aDBS) delivers physiologically informed stimulation that can track fluctuations in PD motor symptoms, enabling more intelligent DBS control. However, most existing aDBS approaches are primarily algorithm- and software-driven, with limited efforts toward circuit realization, particularly low-power and implantable integrated circuits. This paper presents the Silicon Leaky Integrate-and-Fire Deep Brain Stimulation (SiLIF-DBS) controller, a neuromorphic silicon neuron stimulator implemented with metal-oxide-semiconductor (CMOS) technology. For system-level evaluation, a simplified computational model of the SiLIF-DBS controller is derived and embedded within a Parkinsonian cortico-basal ganglia framework for closed-loop validation. The system is driven by beta-band subthalamic nucleus local field potentials (STN-LFPs), with their average rectified value (Beta ARV) used as the control biomarker. Our SiLIF-DBS controller for aDBS suppresses pathological beta activity while consuming only 25% of the power required by open-loop stimulation and achieving a suppression efficiency of $5.85\%$/$\mu$W. Overall, our SiLIF-DBS controller achieves strong beta suppression at substantially reduced power, delivering high suppression efficiency that demonstrates it is a viable foundation for low-power implantable aDBS.
arXiv:2607.05915v1 Announce Type: new Abstract: PCB routing is the task of connecting the nets of a board with copper traces under strict design rules, yet learning-based methods still lag behind rule-based routers. We introduce PCBWorld, an open-source engine-grounded PCB routing environment built on the KiCad EDA engine. As a human engineer does, agents in PCBWorld interactively route a board through the engine's native operations, using its Design Rule Check (DRC) feedback to keep the routing within the design rules. The environment supports both RL policies and tool-using LLM agents. Alongside the environment, PCBWorld-Bench provides three dataset families in KiCad's native board format (.kicad_pcb), covering two types of controllable synthetic instances and 679 real open-source boards. It scores any completed board with eight engine-checked evaluation metrics, regardless of the routing method. In our experiments, agents in PCBWorld consistently outperformed grid-action RL policies and open-loop LLM baselines, and an RL policy trained only on synthetic boards transferred zero-shot to real boards, approaching rule-based routers. These results position the engine-grounded, interactive approach of PCBWorld as a promising foundation for advancing the routing ability of both RL and LLM agents.
arXiv:2607.05933v1 Announce Type: new Abstract: Dynamic Voltage Frequency Scaling (DVFS) on resource-constrained embedded GPU platforms is essential for energy-efficient small language model (SLM) fine-tuning, as privacy- and personalization-driven adaptation increasingly requires local execution and involves repeated forward-backward optimization over many mini-batches, making it substantially more time- and energy-intensive than single-pass inference. To this end, 1) we first characterize the fine-tuning behavior of representative encoder-only SLMs of BERT variants, and autoregressive decoder-only SLMs of Pythia variants on GLUE benchmarks. In addition to the characterizations, 2) we propose a simple yet effective ML-based model selection that selects energy-optimal GPU DVFS settings on resource-constrained embedded platforms. Our results on NVIDIA Jetson AGX Orin demonstrate average 13.11% energy savings (up to 26.73%) over MAXN Mode 0, which has no explicit power cap.
arXiv:2603.04886v2 Announce Type: replace-cross Abstract: Internal--external field separation is crucial for many aspects of geomagnetism, aiming at distinguishing contributions of the magnetic field generated within a given observation surface from those generated in the exterior. When data are available on a full spherical observation surface, this separation is a standard, stable, and widely used procedure dating back to Gauss. However, when data are only available in a subdomain of the observation surface (as is the case for aeromagnetic and ground-based surveys), the situation drastically changes. Here we show that, without prior assumptions, an internal--external field separation is not uniquely possible. Given the geophysically reasonable assumption that the exterior sources, e.g., magnetospheric and ionospheric current systems, are located above a source-free spherical shell, we show that a unique separation becomes possible but that it is highly unstable. The results are based on the spherical Hardy--Hodge decomposition and explain the intrinsic difficulties of regional data-based internal--external potential field separation.
arXiv:2607.05569v1 Announce Type: new Abstract: Arm Permission Overlay Extension (POE) is an intra-process isolation mechanism based on memory protection keys. This mechanism partitions virtual memory into regions whose access permissions can be reconfigured without invoking higher exception levels. Because POE does not enforce privilege separation, POE-based protection domains are applicable only as a software fault-isolation technique. The POE2 is an isolation mechanism that substantially extends POE1. Dealing with memory protection keys, it also introduces new registers and tables that regulate the operations permitted for code executing within protection domains associated with different keys. A permission is determined by the spatial index of the executing code (i.e., the protection key associated with code), the spatial index of the accessed memory, the operation type, and a new attribute of the thread context: its temporal index. POE2 provides stronger security guarantees than POE1, but also introduces considerable architectural complexity. Effective permissions arise from the interaction of multiple hardware components, making direct programming non-trivial and prone to subtle errors. In the paper, we present a detailed analysis of POE2 and introduce a universal programming model with a strong security model for POE2-based systems. The model abstracts the complexity of spatial and temporal indices while enabling typical patterns of partitioned software constructed using intra-process isolation.
arXiv:2607.05573v1 Announce Type: new Abstract: Recent advances in Large Language Models (LLMs) and Vision-Language Models (VLMs) enable the automatic generation of parametric 3D designs from natural-language specifications. This chapter presents an empirical study of foundation models for automatic Computer-Aided Design (CAD) generation of mechanical parts, using a unified evaluation pipeline and a curated benchmark of 97 engineering design problems. We introduce LLMForge, a multi-model text-to-CAD framework integrating JSON-schema validation, analytic feature scoring, mesh synthesis, and multi-round iterative refinement, studied under two critique regimes. IterTracer uses a Phong-shaded ray-trace renderer with analytic visual metrics (silhouette IoU, hole visibility, edge clearance, aspect-ratio conformance) for lightweight geometry-aware feedback across rounds. IterVision replaces the analytic scorer with a VLM semantic critic (Qwen2.5-VL-72B) that evaluates rendered views via chain-of-thought visual reasoning, assessing spatial coherence and design intent. On a benchmark spanning four canonical geometry families (plates with holes and bolt circles, multi-feature boxes, flanged cylinders, and L-brackets), we evaluate seven foundation models: DeepSeek-V3.2, Qwen3-235B-A22B, Llama-3.3-70B, Gemma-3-27B, GLM-4.5, MiniMax-M2.1, and INTELLECT. Under IterTracer, the four highest-ranked models form a tight cluster (overall mean in [0.885, 0.890]) with 98.97% mesh success, showing that compact instruction-tuned models can match substantially larger systems. VLM-based critique in IterVision yields 100% watertight mesh generation on the leading model while surfacing systematic difficulty on rotationally symmetric geometries such as cylinders, where visual and semantic scoring diverge most. We discuss benchmark design, failure modes, CAD-oriented prompting, and implications for industrial workflows and scalable automated mechanical design.
arXiv:2607.06323v1 Announce Type: new Abstract: Real-world learning for dexterous hands remains brittle because high-dimensional hand actions amplify imitation errors and make reinforcement-learning exploration prone to contact-breaking motion. While combining imitation learning (IL) with online reinforcement learning (RL) can reduce manual supervision, unconstrained exploration in raw hand-action spaces is sample-inefficient and risky for physical hardware. We introduce a latent motion prior module (\prior{}) that maps recent hand-action histories to a compact, history-conditioned latent prior and decodes continuous latent commands into executable high-dimensional hand targets. Built on this prior, \method{} is a three-stage real-world dexterous learning framework: it pretrains \prior{} from demonstrations, trains a visuomotor policy that predicts native arm commands and latent hand-action offsets, and improves the policy with online residual RL in the same latent hand-action space. This shared, decodable interface lets residual exploration make local corrections near demonstrated, contact-consistent hand motions rather than perturbing every finger joint independently. We evaluate \method{} on four real-robot dexterous manipulation tasks against raw, linear, and discrete hand-action interfaces. Starting from small task-specific demonstration sets, \method{} achieves a 56.25\% average IL success rate and raises it to 98.75\% after online RL, reaching 100\% final success on three tasks and 95\% on the remaining task.
arXiv:2607.06011v1 Announce Type: new Abstract: This study proposes a metagraph-based domain-decomposed Galerkin reduced-order model (MBDD-G-ROM) for distributed-memory parallel reduced-order analysis of large-scale problems. The method represents domain-decomposed Galerkin reduced-order models over arbitrary domain decompositions using two graph levels: calculation-point graphs for interactions among discretization points and metagraphs for connectivity among local approximation-space subdomains. In the proper orthogonal decomposition (POD)-based implementation, POD computation subdomains are represented as metanodes, while metaedges encode the block-sparsity induced by overlaps between local POD basis supports. Partitioning the metagraph enables the POD computation subdomains to be decoupled from the parallel computation subdomains, allowing distributed-memory parallelization of both offline and online phases, including reduced-system assembly and iterative linear solution, without requiring the two decompositions to coincide. The metagraph also supports static load balancing through metanode weights that approximate computational costs. The method is evaluated for an unsteady diffusion equation and incompressible Navier-Stokes flow around a three-dimensional cylinder. The results show that MBDD-G-ROM preserves reduced-order solution accuracy while achieving high online parallel efficiency. A load-balancing test further demonstrates that cost-based metanode weights can improve computational efficiency.
arXiv:2604.24394v2 Announce Type: replace Abstract: The objective of Emergency Medical Services (EMSs) is to promptly respond to calls from citizens for first aid, providing pre-hospital care and, if necessary, to transfer patients to an appropriate Emergency Department (ED) by ambulance. The efficiency of such a system strongly depends on the deployment of ambulance home bases, i.e., locations where ambulances and their crews are strategically positioned, ready to respond to emergency calls. This paper presents a general Discrete Event Simulation (DES) model designed to capture the stochastic behaviour and workflow of regional ambulance emergency systems. The proposed model incorporates and integrates information collected from different sources, reproducing very accurately the operation of the ambulance system, thus allowing a more comprehensive and realistic analysis. To show the applicability and reliability of the proposed general model, a case study provided by the Azienda Regionale Emergenza Sanitaria - ARES 118 (an Italian Regional Emergency Medical Services Authority - ARES~118}) is presented. It concerns a territory within the Lazio region of Italy, including a medium-size city along with sparsely populated areas. The reported results about scenario analyses highlight how the model we propose can be fruitfully used by the managers to improve effectiveness and quickness of the entire regional EMS system.
arXiv:2605.02965v2 Announce Type: replace Abstract: Artificial intelligence-generated content (AIGC) has emerged as a transformative paradigm for automating the creation of diverse and customized content, giving rise to rapidly growing computational workloads in cloud data centers. It is imperative for AIGC service providers (ASPs) to strategically schedule AIGC workloads to reduce data center energy costs while guaranteeing high-quality content generation. However, the distinctive characteristics of AIGC services pose critical challenges, including model heterogeneity across ASPs, implicit service quality evaluation, and complex inference process control. To tackle these challenges, we propose a joint energy management and coordinated AIGC workload scheduling framework, which introduces an explicit mathematical characterization of service quality to promote both job transfer among ASPs and fine-grained inference process configuration. Moreover, various energy resources within data centers are jointly considered to enhance power usage flexibility. Subsequently, a system utility maximization problem is formulated to balance AIGC service revenue with operational penalties and costs. Nevertheless, the strong coupling among job scheduling decisions induces severe reward sparsity, which limits the effectiveness of existing deep reinforcement learning (DRL) algorithms. To address this issue, we develop a diffusion model-aided reward shaping approach to synthesize complementary reward signals through a multi-step denoising process. This approach is seamlessly integrated with DRL to enable efficient learning of scheduling policies under sparse environmental feedback. Experiments based on real-world models and datasets demonstrate that our scheme effectively accommodates electricity price fluctuations and AIGC model heterogeneity, while achieving superior learning convergence and system utility compared with benchmark methods.
arXiv:2607.05590v1 Announce Type: cross Abstract: Implantable brain-computer interfaces require on-node spike sorting to reduce telemetry bandwidth and power while maintaining reliable neural decoding. This paper presents a hardware-oriented deep binarized neural network (DBNN) spike-sorting system with two binarized hidden layers with 256 neurons and a fixed-point output layer to enable multiplier-free inference dominated by sign-controlled accumulation and bit-wise logic. The proposed classifier operates on compact 16-sample spike waveforms to reduce the implementation cost (16-256-256-3) and achieves a median classification accuracy of 98.7% on both synthetic and in-vivo datasets. An FPGA prototype on a Cyclone V device operates at 50 MHz and requires 528 cycles per spike, corresponding to a 0.01 ms compute latency, while consuming 828 ALMs and 1023 registers with zero DSP blocks. For ASIC feasibility, the DBNN is implemented using FreePDK45-based flow; synthesis in Synopsys Design Compiler indicates an estimated silicon area of 0.014 mm2 and an operating power of 122 nW at 20 kHz under a 1.1 V supply. These results demonstrate that the proposed DBNN spike sorter offers a favorable trade-off between accuracy and implementation cost, supporting low-power, implantable neural interfaces. Overall, the proposed DBNN spike sorter achieves high accuracy (98.7%) with extremely low hardware cost (0.014 mm2, 122 nW at 20 kHz) and multiplier-free operation, making it suitable for low-power, implantable neural interfaces. This paper introduces the first DBNN designed for real-time neural spike sorting, striking an excellent balance between input data size and network complexity.