arXiv:2607.05411v1 Announce Type: new
Abstract: Higher education institutions are increasingly expected to ensure that both students and staff develop Generative AI (GenAI) literacies. In response, they are introducing professional development programs and embedding GenAI skills within student curricula. However, current educational frameworks typically assume a linear progression of GenAI literacy, implying that foundational technical understanding must precede creative application. This paper challenges such an assumption through a psychometric analysis of a taxonomy-based self-assessment instrument (n = 158). We applied Rasch measurement theory and Guttman ordering to map the latent perceived order of difficulty of GenAI skills across students, academics, and professional staff. Results reveal a fundamental divergence in perceived competence profiles: while academics follow a more traditional linear path, students exhibit an "inverted" profile, frequently mastering high-level creation tasks before acquiring foundational conceptual understanding. Furthermore, the correlation of skill difficulty between students and academics was weak (r = 0.188). We argue that this "skill bypass" creates a fragile sense of fluency, where high self-efficacy in prompting masks low literacy in AI mechanics. These findings challenge the "one-size-fits-all" curricula and provide the empirical basis for diagnostic-driven, modular interventions that foster genuine human-AI synergy.
Science Journals
arXiv:2607.05416v1 Announce Type: new
Abstract: We present a new method for structural sequence analysis grounded in Algorithmic Information Theory (AIT). At its core is the Ladderpath approach, which extracts nested and hierarchical relationships among repeated substructures in linguistic sequences -- an instantiation of AIT's principle of describing data through minimal generative programs. These structures are then used to define three distance measures: a normalized compression distance (NCD), and two alternative distances derived directly from the Ladderpath representation. Integrated with a $k$-nearest neighbor classifier, these distances achieve strong and consistent performance across in-distribution, out-of-distribution (OOD), and few-shot text classification tasks. In particular, all three methods outperform both gzip-based NCD and BERT under OOD and low-resource settings. These results demonstrate that the structured representations captured by Ladderpath preserve intrinsic properties of sequences and provide a lightweight, interpretable, and training-free alternative for text modeling. This work highlights the potential of AIT-based approaches for structural and domain-agnostic sequence understanding.
arXiv:2607.06077v1 Announce Type: new
Abstract: Photonic time crystals (PTCs) host momentum bandgaps, or k gaps, that enable parametric amplification and lasing of seeded fields. In nonlinear PTCs, Kerr saturation dynamically suppresses the exponential growth, reshaping k-gap amplification into an active, spatially homogeneous k gap soliton train. Here, we show that a localized perturbation on this unstable background then nucleates a transient spatiotemporal excitation: the breathing k gap event. Unlike Peregrine breathers emerging from modulational instability on a planewave background, this event extracts energy from competing host k gap solitons and remains sustained by their interaction. We identify this process as an instability on instability mechanism intrinsic to nonlinear k gap dynamics. The event is robust against noise and disorder, and can be deterministically reshaped into collective breathing patterns by periodic and phase engineered seeding. These results establish k gap engineering as a route to generating and controlling extreme spatiotemporal waves in photonic time varying media.
arXiv:2607.06525v1 Announce Type: new
Abstract: This paper introduces Crossroads, a smart contract layer for chain-abstracted assets. In Crossroads, assets from nearly any chain are represented on a single backend blockchain as ERC-20 tokens. As a result, any asset can participate in smart-contract-based exchange, lending, or privacy applications on a single unified platform. So while Crossroads offers cross-chain bridging, a common, partial approach to alleviating the fragmentation of the blockchain ecosystem today, this is just one service within Crossroads' general-purpose chain-abstraction model.
Crossroads relies on key encumbrance: a threshold signing committee holds encumbered keys controlling assets on each integrated chain, signing transactions only as authorized by smart contracts on the backend blockchain. Asset movements are fee-efficient, as ownership changes are recorded on the backend blockchain and users may set the transaction fee for withdrawals.
Crossroads enables permissionless, modular integration of new blockchains using pluggable oracles with flexible design options (zkBridge, TEE-based, hybrid). Asset deposits into Crossroads benefit from strong, chain-specific finalization guarantees, minimizing the risk of reorg attacks. Unlike existing bridges, however, third-party smart contracts in Crossroads can provide fast, optimistic access to funds before finalization completes.
We prove that Crossroads satisfies soundness: given an honest quorum of signing committee members, any user can unilaterally generate a withdrawal transaction transferring their net balance to an account on an integrated blockchain. We implement a proof of concept across multiple public blockchains: Bitcoin, Ethereum, and Solana. We catalog a range of applications enabled by Crossroads, including universal wallets, cross-chain staking and lending, privacy-preserving payments, and private management of public blockchain assets.
arXiv:2607.06532v1 Announce Type: new
Abstract: Mixed-integer linear programming (MILP) instances used for solver development are hard to obtain when models come from private or application-specific pipelines. A generator must keep the structure that solvers and learned policies rely on. Existing general generators usually choose their generation unit from a formulation template, summary statistics, local graph edits, or blocks found after recombination. These units do not explicitly record how a local part of the MILP is coupled to the rest of the instance. We propose GraphBU, a graph-native generator whose basic unit is a local subproblem plus its interface. The method promotes coupling nodes into master constraints or boundary variables and uses the resulting block units for compatibility-checked replacement. The analysis focuses on the properties needed by this construction: promotion separates interfaces, replacement can preserve feasibility under an interface-slack condition, and the graph construction is invariant to row-column permutations. On MILP instances generation, this unit keeps graph statistics close to the source family, preserves feasibility on most datasets, and improves downstream Predict-and-Search training. Genrated by GraphBU, The average graph-statistical similarity was approximately 0.934, the average feasibility was approximately 96.7%, and the average increase in the main index of downstream PS was approximately 8.0%.
arXiv:2607.06087v1 Announce Type: new
Abstract: This paper presents an approach and application of optimization of spatial packaging of interconnected systems with physical interactions (SPI2) in three-dimensional component placement problems. To enable its application for an automotive use case, SPI2 must support both initial design generation, including component alignment, and robust system-level coordination, requiring improved solution reliability and tractable computational cost. To address these requirements, the proposed methodology improves convergence rate and solution quality by enhancing numerical robustness in gradient-based optimization while reducing computational load. Existing SPI2 approaches are extended through the addition of alignment capabilities, enabling the representation of port-to-port alignments between components. Furthermore, the applicability of SPI2 is expanded by treating component placement locations as design variables, allowing for penalty-based coordination to ensure design feasibility and enabling integration within system-level optimization. The approach is validated using a multi-objective optimization framework based on Nondominated Sorting Genetic Algorithm II (NSGA-II), applied to a combined powertrain optimization and battery chassis integration problem. This demonstrates the effectiveness of the SPI2 in a system-level design context. The results show a twofold application of SPI2 in an automotive use case: first, as a tool for initial design generation, and second, as part of a system-level design coordinator that outperforms a discretized exhaustive search while requiring lower computational cost.
arXiv:2607.06093v1 Announce Type: new
Abstract: Hybrid electrolyzer systems combining alkaline water electrolysis and proton exchange membrane water electrolysis have been investigated in the literature motivated by the expectation that their contrary techno-economic characteristics compensate for the individual technical and economic restrictions of each technology, thereby improving the profitability of green hydrogen production. To reassess the economic potential of hybrid electrolyzer systems beyond these technology-specific assumptions, we independently vary two key characteristics, electrolyzer efficiency and investment cost, in a large-scale sensitivity analysis. For each generated parameter configuration, we performed a techno-economic optimization of a green hydrogen supply chain, including two electrolyzers. The resulting system design, cost objective, and dispatch behavior are subsequently analyzed. Consequently, hybrid electrolyzer systems are identified as optimal if they provide a cost benefit over single electrolyzer systems. The analysis reveals that hybrid electrolyzer systems represent the optimal solution in at most 5.0% of the investigated cases. Furthermore, the maximum cost benefit is 0.057 EUR/kgH2, which corresponds to only about 1% of the total green hydrogen production cost. Additional analyses considering variations in energy purchase prices, storage fees, availability of renewable energy, and baseline electrolyzer efficiency yield negligible changes to these results. Hence, considering that hybrid electrolyzer systems offer marginal cost benefits and prove economically optimal in very few cases, they seem more likely to represent an economic fallacy than a smart strategy.
arXiv:2607.05436v1 Announce Type: new
Abstract: The rapid scaling of over-parameterized machine learning architectures, particularly LLMs, raises a profound crisis: do these systems exhibit genuine intelligence, or are they merely sophisticated statistical pattern matchers? Classical flat Euclidean statistics cannot differentiate continuous interpolation from the autonomous discovery of novel causal laws. To resolve this, we introduce Statistically Meaningful Geometry (SMG), a framework modeling over-parameterized learning systems as infinite-dimensional non-parametric Orlicz fiber bundles. We prove that under persistent out-of-distribution (OOD) stimuli governed by unmodeled causal mechanisms, continuous optimization fails. Unmodeled variance is rejected by the visible horizontal base manifold, leaking into the unobservable vertical fiber space and generating an accumulation of Active Acausal Tension. Driven by the statistical manifold's non-linear curvature, this tension inevitably strikes a conjugate focal boundary ($T_{\text{crit}} = \pi^2 / K_{\text{max}}$), triggering localized volumetric collapse and a catastrophic matrix singularity ($[G_f]^{-1} \to \infty$). We demonstrate this geometric breakdown acts as the strict non-equilibrium trigger for a Gauge Symmetry Break (GSB). The system purges hidden tension from unobservable gauge redundancies, spontaneously crystallizing a new, mathematically independent horizontal coordinate axis. This non-parametric phase transition registers as a discrete $+1.0$ integer step-jump in observable Structural G-Entropy. By decoupling parameter charts and subjecting emergent axes to a Minimal Energy Path Criterion and a Causal Invariance Filter, we distinguish genuine discovery from malignant hallucinations. Ultimately, SMG provides a parameter-free, falsifiable dashboard to mathematically certify true intelligence, transforming AI for Science into an engine of autonomous paradigm shifts.
arXiv:2607.06094v1 Announce Type: new
Abstract: Faults on a cyber-physical system (CPS) are too rare and unrepresentative to characterise, or even to select a model on, so detection must instead model normal behaviour; the standard point-adjusted evaluation, however, rewards detectors that never do. CPS normal behaviour is the union of many imbalanced, curved, thin-fringed operating regimes rather than a single blob; we state this structure as ten assumptions (A1-A10), abbreviated Massive, Implicit, Imbalanced Multimodality (MIIM). We model the normal law with a jointly learned latent representation plus explicit Gaussian-mixture mode clustering, scored in the latent rather than by a global density or a reconstruction residual, and evaluate under a deliberately fair protocol: raw point-wise metrics with no point adjustment, a trivial-detector difficulty split, prevalence-matched F1, and train-normal-only calibration. On three real CPS datasets (WADI, HAI, SKAB), the detector wins both the combined column and the difficult correlation/dynamics-fault column on all three, reaching difficult-subset AUROC 0.831 on HAI, 0.726 on WADI, and 0.610 on SKAB. The margin is largest on the two multimodal datasets the MIIM assumptions target and slimmest on the near-unimodal one, tracking multimodality as the thesis predicts, and it holds against three deep detectors (USAD, TranAD, GDN) re-computed with the same raw metrics, all of which collapse on the difficult subset. The methodological contributions are the MIIM assumption set, the difficulty-stratified fair protocol, and a latent-only score that drops reconstruction because a flexible decoder rebuilds the hard faults faithfully.
arXiv:2607.05458v1 Announce Type: new
Abstract: Large language model (LLM) agents are usually improved by changing prompts, models, or hand-written workflows, while the execution harness around the model is treated as fixed infrastructure. We argue that this harness is itself a learnable control layer. We formalize harness operation as a finite-horizon Harness MDP, where a lightweight controller selects structural execution actions while the LLM executor remains frozen. The controller is trained from offline rollouts using advantage-weighted regression with only terminal task-rubric rewards. We also separate final task quality from a post-hoc Harness Maturity Score, which measures whether the harness follows reliable execution patterns rather than only whether the final answer is correct. This separation gives a finite-buffer view of harness learning: final-quality gains require high-return support in the offline buffer, while process behavior can shift whenever it aligns with advantage-weighted actions. Across six controlled domains and two public-benchmark adapters, the learned controller consistently improves verification behavior and selectively improves final task quality, with the largest gains on adapted tau-bench retail, adapted AgentBench DB-Bench, and coding with a calibrated structural verifier. Ablations against behavior cloning and Forced CHECK show that the gains are not explained by imitation or by simply adding checks. These results identify harness control as a learnable layer for frozen LLM agents, while showing that offline support limits when better process control becomes better final answers.
arXiv:2607.05894v1 Announce Type: new
Abstract: Modern software supply chains comprise hundreds of transitive dependencies, yet existing analysis tools operate at either the ecosystem level (dependency graphs) or the code level (static analysis within packages). This separation creates two failure modes. First, false-positive CVE alerts for unreachable code. Second, blind spots for structurally critical micro-dependencies. We introduce cross-level risk propagation, a framework that bridges code-level risk metrics with ecosystem-level dependency exposure through a unified risk formula. Preliminary evaluation on 50 packages across npm and PyPI reveals a class of hidden amplifiers -- micro-dependencies with fewer than 50 methods but over 50,000 dependents -- that carry outsized supply-chain risk invisible to all current Software Composition Analysis (SCA) tools. Without cross-level analysis, such packages can harbor exploitable code for years because no current tool considers both internal code structure and ecosystem position simultaneously. These results suggest that cross-level analysis opens a new design space for supply-chain security.
arXiv:2607.05467v1 Announce Type: new
Abstract: Fog severely degrades the visibility of small unmanned aerial vehicles (UAVs) in skydominant, long-range imagery, reducing the reliability of downstream detection and tracking. This paper presents a task-driven evaluation framework that links depth-aware synthetic fog generation, image restoration, object detection, and tracking within a unified pipeline. Given the practical difficulty of collecting and annotating foggy UAV scenes, synthetic fog is generated from real clear-weather outdoor images containing UAV targets using monocular depth estimation and the atmospheric scattering model. Representative restoration methods from classical, convolutional neural network (CNN)-based, and transformer-based families are first compared, after which the selected restoration model is integrated into the downstream perception pipeline. Detection is evaluated under both clean-only and fog-inclusive training regimes using multiple detector variants, while tracking-by-detection is assessed on clean, foggy, and restored video sequences. Beyond image-level restoration metrics, the study evaluates how fog and restoration affect detection robustness and tracking performance. The results show that fog substantially degrades both detection and tracking, primarily through increased missed detections. Fog-inclusive training provides the most consistent improvement in robustness, whereas test-time restoration is most beneficial when the detector has been trained only on clean imagery. These findings show that restoration quality does not necessarily translate into proportional gains in downstream perception and therefore should be evaluated jointly with detection and tracking performance.
arXiv:2607.05553v1 Announce Type: new
Abstract: Transient stability control in smart grids requires rapid post-fault damping of generator frequency and rotor angle deviations to prevent cascading failures. This paper proposes FedPPO-PG, a Federated Multi-Agent Proximal Policy Optimization framework with Physics-Grounded neighborhoods, which reformulates transient stability control as a cooperative multi-agent reinforcement learning problem optimized directly against closed-loop stability objectives. Each generator hosts an independent local actor augmented with the frequency deviations of its two most strongly coupled electrical neighbors, identified from the post-fault Kron-reduced susceptance matrix. A guided policy initialization phase warm-starts all actors from the classical decentralized controller, while a centralized critic guides advantage estimation under the centralized training--decentralized execution (CTDE) paradigm. Evaluated on a simulation of the IEEE 39-bus benchmark system across five training and three unseen fault contingencies, FedPPO-PG achieves 100% stabilization in all 24 trials, reduces mean stability time by 72.4%, and cuts the control power by 7-14 times compared to the centralized baseline. Each actor executes independently with no central coordinator at deployment, and the per-actor inference latency satisfies the IEEE/IEC 60255-118-1-2018 real-time reporting requirements.
arXiv:2607.05565v1 Announce Type: new
Abstract: Conventional non-invasive photothermal imaging techniques are fundamentally constrained by the diffusive nature of heat transport, which causes severe energy dissipation during subsurface reconstruction. Although modulation-based approaches partially mitigate this limitation by encoding depth information into phase delay and amplitude attenuation, they remain inherently restricted by repeated temporal excitation, long acquisition times, and stitching artifacts in large-area inspection. In this work, we propose a structured illumination scanning thermography (SISTER) framework that replaces conventional temporal modulation with continuous spatial scanning under static structured illumination. The key theoretical insight is that heat diffusion is governed by a Markov semigroup, while sample motion transforms static spatial illumination into an equivalent temporal excitation through a Galilean coordinate transformation. This formulation enables dynamic-to-static reconstruction without repeated temporal modulation and provides a unified interpretation of spatial scanning and conventional signal modulation. A scanning system is integrated to implement the proposed framework together with a dynamic-to-static reconstruction algorithm for continuous subsurface defect inspection. Both numerical simulations and experimental results demonstrate that the proposed method significantly improves spatial continuity, signal-to-noise ratio, and detection capability while effectively eliminating stitching artifacts and reducing acquisition complexity. The proposed SISTER framework establishes a unified theoretical foundation for scanning photothermal imaging and provides a practical paradigm for high-efficiency, large-scale industrial non-destructive testing.
arXiv:2607.05577v1 Announce Type: new
Abstract: Long-form fiction writers need memory that answers multi-hop questions about evolving story state: who knows a secret and when they learned it, whether an event preceded the narration that revealed it, whether a setup paid off, and how a relationship shifted. General-purpose retrieval and agent-memory systems represent entities and facts but not the narratological structure these questions turn on, so they surface the wrong evidence or none at all. We introduce the Narrative World Model (NWM), a writer-memory system that pairs a narratology-grounded typed temporal-state graph with query-conditioned hybrid retrieval. To measure memory rather than the answerer, we read every system through a single held-constant Opus 4.8 reader over only that system's chapter-safe evidence, on a reproducible public corpus and a validated multi-hop benchmark, and we compare against the strongest existing temporal-knowledge-graph agent-memory framework, Graphiti/Zep (Rasmussen et al., 2025). NWM substantially and significantly outperforms this baseline on multi-hop narratological QA across both corpora, and far exceeds GraphRAG and flat retrieval. The advantage is representational rather than an artifact of extraction: it survives rebuilding the baseline with NWM's own extractor, and traces to its narratology-grounded structure and query-conditioned retrieval, not to graph size or extractor quality.
arXiv:2607.05913v1 Announce Type: new
Abstract: xDECAF is an extensible tool for architecture-based data flow analysis with a focus on information security. It combines an extended data flow diagram metamodel of labeled flows and nodes, a domain-specific constraint language with different flow operations, and a browser-based editor backed by an analysis engine. In this paper, we present the xDECAF tool library and a curated catalog of over 20 example models with documented constraints and expected violations, intended as a reusable dataset for the community. The tool has already been adopted by several research lines, providing concrete evidence of its utility. The tool, dataset, and a hosted online editor are publicly available.
arXiv:2512.05906v2 Announce Type: replace
Abstract: Spiking neural networks (SNNs), central to computational neuroscience and neuromorphic machine learning (ML), require efficient simulation and gradient-based training. While AI accelerators offer promising speedups, gradient-based SNNs typically implement sparse spike events using dense, memory-heavy data-structures. Existing exact gradient methods lack generality, and current simulators often omit or inefficiently handle delayed spikes. We address this by deriving gradient computation through spike event queues, including delays, and implementing this into memory-efficient, autodifferentiable spike event queues (ADSEQ). These are benchmarked across CPU, GPU, TPU, and LPU platforms. We find that queue design strongly shapes performance. CPUs, as expected, perform well with traditional tree-based or FIFO implementations, while GPUs excel with ring buffers for smaller simulations, yet under higher memory pressure prefer more sparse data-structures. TPUs seem to favor an implementation based on sorting intrinsics. Selective spike dropping provides a simple performance-accuracy trade-off, which could be enhanced by future autograd frameworks adapting diverging primal/tangent data-structures.
arXiv:2512.07997v2 Announce Type: replace
Abstract: Gestures are an integral part of our daily interactions with the environment. Hand gesture recognition (HGR) is the process of interpreting human intent through various input modalities, such as visual data (images and videos) and bio-signals. Bio-signals are widely used in HGR due to their ability to be captured non-invasively via sensors placed on the arm. Among these, surface electromyography (sEMG), which measures the electrical activity of muscles, is the most extensively studied modality. However, less-explored alternatives such as inertial measurement units (IMUs) can provide complementary information on subtle muscle movements, which makes them valuable for gesture recognition. In this study, we investigate the potential of using IMU signals from different muscle groups to capture user intent. Our results demonstrate that IMU signals contain sufficient information to serve as the sole input sensor for static gesture recognition. Moreover, we compare different muscle groups and check the quality of pattern recognition on individual muscle groups. We further found that tendon-induced micro-movement captured by IMUs is a major contributor to static gesture recognition. We believe that leveraging muscle micro-movement information can enhance the usability of prosthetic arms for amputees. This approach also offers new possibilities for hand gesture recognition in fields such as robotics, teleoperation, sign language interpretation, and beyond.
arXiv:2512.11001v2 Announce Type: replace
Abstract: The proliferation of large language models (LLMs) has accelerated the adoption of agent-based data pipelines. Yet current approaches remain ad hoc, relying on fixed structures, predefined LLMs, and single execution engines, without systematic optimization across heterogeneous data sources and engines. This paper presents NOMA, a query optimization framework for multi-agent data pipelines. We argue that optimizing agentic pipelines is a fundamentally different query optimization problem, with central challenges: (i)~a multi-dimensional search and objective space, where topology, model, and engine choices must be optimized jointly across latency, cost, and accuracy; (ii)~a variable pipeline topology; (iii)~the co-existence of diverse data models, leaving no common operator algebra; and (iv)~the significant cost of executing these pipelines. Our controlled experiment over a real-world 10-agent pipeline reveals extreme variance (153x cost, 5x latency, 25% quality) and that optimal plans are heterogeneous configurations no user would construct manually. Our analysis of real deployments confirms these inefficiencies are systematic. We present \system{} as an integrated optimization loop in which plan generation, cost estimation, runtime refinement, and semantic caching reinforce one another across executions, setting a community-wide research agenda on query optimization for multi-agent systems.
arXiv:2512.13172v2 Announce Type: replace
Abstract: The amplitude-variation-with-offset inversion techniques are formulated to estimate elastic properties by fitting modeled seismic responses to observed data. Solving inverse seismic problems requires minimizing a target objective function for which gradient-based methods are frequently adopted. However, the efficiency and accuracy of these methods depend significantly on the approach used to compute the gradient of the target function. This work first derives an algebraically equivalent reformulation of the exact Knott-Zoeppritz PP equations, yielding a differentiable forward model suitable for gradient-based optimization. The resulting formulation is then used to derive an explicit adjoint-state gradient of a convolution-based objective function for discretized multilayer media, providing an efficient framework for exact nonlinear inversion of P- and S-wave velocities and density, including the consistent treatment of post-critical-angle reflections through the complex-valued Zoeppritz response. The adjoint state-based solution improves computational efficiency by avoiding numerical approximations while maintaining high accuracy in calculating the gradient for seismic inversion. Additionally, using the exact Zoeppritz equation helps overcome the limitations associated with weak elastic property contrasts across subsurface layers. The inversion methodology is validated using 1D well-log-based and 2D synthetic seismic data at varying signal-to-noise ratios, including a 500-member ensemble test of sensitivity to the starting model and a Marmousi comparison of Zoeppritz versus linearized Aki-Richards reflectivity at high contrast and wide angles. Then it is applied to a 2D field data set from the Troll oil and gas field in the Norwegian North Sea. The results demonstrate that the proposed inversion framework provides stable and reliable estimates of elastic property models.
arXiv:2512.13919v3 Announce Type: replace
Abstract: This work shows how adaptivity can enhance value realization of digital twins in civil engineering. We focus on adapting the state transition models within digital twins represented through probabilistic graphical models. The bi-directional interaction between the physical and virtual domains is modeled using dynamic Bayesian networks. By treating state transition probabilities as random variables endowed with conjugate priors, we enable hierarchical online learning of transition dynamics from a state to another through effortless Bayesian updates. We provide the mathematical framework to account for a larger class of distributions with respect to the current literature on digital twins. To compute dynamic policies with precision updates we solve parametric Markov decision processes through reinforcement learning. The proposed adaptive digital twin framework enjoys enhanced personalization, increased robustness, and improved cost-effectiveness. We assess our approach on a case study involving structural health monitoring and maintenance planning of a railway bridge.
arXiv:2510.01642v4 Announce Type: replace
Abstract: Recent advances in robotic manipulation have integrated low-level robotic control into Vision-Language Models (VLMs), extending them into Vision-Language-Action (VLA) models. Although state-of-the-art VLAs achieve strong performance in downstream robotic applications, supported by large-scale crowd-sourced robot training data, they still inevitably encounter failures during execution. Enabling robots to reason and recover from unpredictable and abrupt failures remains a critical challenge. Existing robotic manipulation datasets, collected in either simulation or the real world, primarily provide only ground-truth trajectories, leaving robots unable to recover once failures occur. Moreover, the few datasets that address failure detection typically offer only textual explanations, which are difficult to utilize directly in VLA models. To address this gap, we introduce FailSafe, a novel failure generation and recovery system that automatically produces diverse failure cases paired with executable recovery actions. FailSafe can be easily adapted to a wide range of manipulation tasks in simulators with motion planning support, enabling scalable creation of failure-action data. To demonstrate its effectiveness, we fine-tune LLaVA-OneVision-7B (LLaVA-OV-7B) to build FailSafe-VLM. Experimental results show that FailSafe-VLM successfully helps robotic arms detect and recover from potential failures, improving the performance of three state-of-the-art VLA models (Pi-0-FAST, OpenVLA, OpenVLA-OFT) by up to 22.6% on average across several tasks in ManiSkill. Furthermore, FailSafe-VLM could generalize across different spatial configurations, camera viewpoints, object and robotic embodiments.
arXiv:2607.06270v1 Announce Type: new
Abstract: The Jensen-Shannon divergence (JSD) is a symmetric and bounded measure of the dissimilarity of two probability distributions, which has become a standard tool in statistics, information theory, and machine learning. We complement the understanding of its mathematical properties by presenting an analysis of the amount of data that is needed to distinguish between two distributions, given the value of JSD between them. We find the number of independent and identically distributed samples that suffice for a classifier to determine which of two distributions generated observed data at a desired error rate, for two complementary classifiers: we show that for the log-likelihood-ratio classifier, a sample size that grows as the inverse JSD is sufficient, whereas for a majority-vote classifier assembled from independent single-sample decisions, the sufficient size grows as the squared inverse JSD. These distinct scalings offer operational readings of JSD values and their translation into distinguishability in different contexts.
arXiv:2607.05598v1 Announce Type: new
Abstract: Novel View Synthesis (NVS) methods, such as 3D Gaussian Splatting (3DGS), rely heavily on the assumption of clean, multi-view consistent, posed input images. Real-world captures can violate this assumption due to screen-space artifacts-static occlusions fixed to the 2D image plane rather than to the 3D world. Common examples include physical sensor defects, environmental obstructions (such as rain or mud on the lens enclosure), capture obstructions (such as a thumb over the camera sensor or a dashboard visible in dashcam footage), and digital overlays (such as watermarks or UI elements). When present, they are erroneously baked into the 3D geometry as "floaters" or near-camera artifacts, degrading the quality of novel-view rendering. In this work, we propose SSA-3DGS, an unsupervised framework that jointly optimizes a 3D scene and a learnable 2D overlay to recover a clean 3D scene and the corrupting artifacts. By exploiting geometric consensus across views, our method effectively disentangles static artifacts from the 3D scene geometry without supervision or manual input. Across diverse synthetic corruptions and a self-captured real-world dataset, SSA-3DGS improves reconstruction fidelity by up to 9 dB PSNR over 3DGS trained on the same corrupted inputs, while faithfully preserving the corrupting artifact.
arXiv:2607.05615v1 Announce Type: new
Abstract: Activation steering via sparse autoencoders (SAEs) enables behavioral control of large language models without task-specific fine-tuning, but standard methods apply the steering signal at every generated token, incurring constant per-token perturbation that risks degrading fluency. We ask: is dense intervention necessary? We introduce Stochastic Token Steering (STS), which gates each token independently with probability $p$, and Stochastic Block Steering (SBS), which gates a leading window once per sequence; neither requires a reward model or learned gating policy. Across two model families and two behavioral tasks, steering only 50% of the tokens recovers most of the dense-steering effect while preserving fluency, and steering as few as 30% surpasses prompt-based control. The optimal steering magnitude scales inversely with the intervention ratio, revealing that SAE-mediated control is rate-limited: the behavioral outcome depends on cumulative signal dosage across a sequence.