arXiv:2604.26126v3 Announce Type: replace Abstract: This paper proposes a deep reinforcement learning (DRL)-based event-triggered controller design for networked artificial pancreas (AP) systems. Although existing DRL-based AP controllers typically assume periodic control updates, networked control systems (NCSs) require a reduction in communication frequency to achieve energy-efficient operation, which is directly tied to control updates. However, jointly learning both insulin dosing and update timing significantly increases the complexity of the learning problem. To alleviate this complexity, we develop a practical DRL-based controller design that avoids explicitly learning update timing by introducing a rule-based criterion defined by changes in blood glucose. As a result, decision-making occurs at irregular intervals, and the problem is naturally formulated as a semi-Markov decision process (SMDP), for which we extend a standard DRL algorithm. Numerical experiments demonstrate that the proposed method improves communication efficiency while maintaining control performance.
Science Journals
arXiv:2604.17669v2 Announce Type: replace Abstract: This paper presents a comprehensive review of the NTIRE 2026 Low Light Image Enhancement Challenge, highlighting the proposed solutions and final results. The objective of this challenge is to identify effective networks capable of producing clearer and visually compelling images in diverse and challenging conditions by learning representative visual cues with the purpose of restoring information loss due to low-contrast and noisy images. A total of 195 participants registered for the first track and 153 for the second track of the competition, and 22 teams ultimately submitted valid entries. This paper thoroughly evaluates the state-of-the-art advances in (joint denoising and) low-light image enhancement, showcasing the significant progress in the field, while leveraging samples of our novel dataset.
arXiv:2605.15398v1 Announce Type: new Abstract: Recent advances in 3D generative editing, particularly pipelines based on 3D Gaussian Splatting (3DGS), have achieved high-fidelity, multi-view-consistent scene manipulation from text prompts. However, we find that these pipelines also introduce new safety risks when unsafe prompts produce edits that are propagated and optimized across views. In this work, we study unsafe generation in 3D editing pipelines and show that such behavior can lead to coherent, undesirable Not-Safe-For-Work (NSFW) content in the final 3D representation. To address this, we propose 3DEditSafe, a safety-regularized 3D editing framework that constrains unsafe semantic propagation during optimization. 3DEditSafe combines generation-stage safety guidance with rendered-view 3D safety regularization, safe semantic projection, residue suppression, and mask-aware preservation to steer optimization away from unsafe editing directions. We evaluate our approach on EditSplat scenes using an object-compatible unsafe prompt benchmark and show that 2D safety guidance alone is not consistently sufficient to prevent unsafe 3D edits. 3DEditSafe reduces unsafe semantic alignment and view-level attack success rates, while revealing a safety-quality tradeoff in which stronger unsafe suppression can introduce artifacts or reduce unsafe-prompt fidelity. To our knowledge, this work is the first attempt to study and defend against unsafe generation in text-driven 3D editing pipelines, highlighting the need for safety mechanisms that operate directly on optimized 3D representations.
arXiv:2511.04074v2 Announce Type: replace Abstract: Accurately modeling seismic wave attenuation is critical for ground response analyses (GRAs), which aim to replicate local site effects in ground motions. However, theoretical transfer functions (TTFs) from GRAs often overestimate empirical transfer functions (ETFs) when the small-strain damping ratio ($D_{\text{min}}$) is set equal to laboratory measurements. Prior studies addressed this by inflating $D_{\text{min}}$ in one-dimensional (1D) GRAs to account for apparent damping mechanisms such as diffraction and mode conversions that cannot be captured in 1D. Although this approach improved fundamental-mode predictions, it often overdamped higher modes. This study explores more direct modeling of apparent damping using two-dimensional (2D) GRAs at four downhole array sites: Delaney Park (DPDA), I-15 (I15DA), Treasure Island (TIDA), and Garner Valley (GVDA). At each site, three numerical damping formulations, Full Rayleigh, Maxwell, and Rayleigh Mass, were implemented using both conventional $D_{\text{min}}$ and an inflated $D_{\text{min}}$ ($m \times D_{\text{min}}$) obtained from site-specific calibration. Results show that the appropriate $D_{\text{min}}$ multiplier ($m$) correlates with the site's velocity contrast. Using inflated $D_{\text{min}}$, Full Rayleigh and Maxwell damping systematically overdamped higher modes, with Maxwell damping also shifting modal peaks. In contrast, Rayleigh Mass damping consistently achieved the closest match to ETFs at three of the four sites while offering faster computational performance. These findings demonstrate that inflated $D_{\text{min}}$ can represent unmodeled attenuation in 2D GRAs, particularly at sites with low velocity contrast, and that frequency-dependent formulations such as Rayleigh Mass damping can more accurately predict site response than traditional frequency-independent approaches.
arXiv:2605.15731v1 Announce Type: new Abstract: This paper presents the real-world implementation and field validation of a user-aware bidirectional electric vehicle (EV) charging system developed within the Mobilities for EU and DymoBat projects in Dresden. Building on earlier simulation frameworks, the system enables transition from conceptual models to operational deployment in urban environments. To support grid flexibility and sustainable mobility, the solution combines real-time vehicle and user data with a centralized optimization platform to enable dynamic charging and discharging decisions. The architecture integrates a wireless On-Board Diagnostic II (OBD-II) interface and an open middleware node connected via a 5G campus network, allowing early access to vehicle state-of-charge before plug-in. A tablet-based interface captures user preferences such as departure time and energy demand, which are incorporated into the optimization together with grid conditions. A key contribution is a multi-level communication architecture linking the EV, charging station, user interface, and grid control center using the Open Charge Point Protocol (OCPP). The system integrates software, embedded hardware, and network communication for real-time charging management. Field deployment at Ostra Sport Park in Dresden demonstrates feasibility, improved load balancing, and robust vehicle-to-grid operation. The results show that early data acquisition and predictive control can enhance system efficiency. This work provides a practical benchmark for positive energy districts and future urban e-mobility systems.
arXiv:2605.15548v1 Announce Type: new Abstract: Traditional robotic hand metrics focus on static properties such as workspace, manipulability, and grasp stability. However, these metrics do not directly measure dexterity under the standard definition in robotic manipulation: the ability to continuously change an object's pose within the hand while maintaining contact from an initial grasp. We introduce Kinematic Rolling Manipulation Ability (KaRMA), a kinematic-only metric for fine manipulation that quantifies reachable in-hand translation and reorientation of a spherical test object within a two-finger precision pinch through feasible rolling motions. KaRMA enforces joint limits, collision constraints, rolling contact, and antipodal force feasibility, then investigates reachable in-hand object poses via breadth-first search over translation and rotation primitives. KaRMA reports three scores: translational coverage (KaRMA-T), rotational coverage (KaRMA-R), and sensitivity to the initial grasp (KaRMA-S). We evaluate KaRMA on 16 widely used robotic hands and compare against static baselines, showing that KaRMA separates hands that rank identically under static proxies, reveals translation-rotation tradeoffs invisible to existing baselines, and is qualitatively consistent with selected published task benchmarks where Jacobian-based metrics can be misleading.
arXiv:2605.15549v1 Announce Type: new Abstract: The demand for clean energy is ever increasing, with new nuclear technologies presenting a complementary solution to renewable energies. However, designing and operating these systems is exceptionally difficult, given the complexity of the physical phenomena that interact to form the system dynamics. While high-fidelity simulations help to understand the non-linear, multi-physics interactions within a reactor, they are computationally expensive and rarely suitable for real-time applications. Furthermore, model-based approaches are inherently sensitive to simplifying assumptions required to derive their governing equations and parameters, leading to inevitable discrepancies with real-world measurements. In contrast, Machine Learning (ML) methods have the potential to generate reliable surrogate models which may be able to quickly predict the system's behaviour. However, the number of data-driven methods that can potentially be used for this task is large and diverse. In a safety-critical setting such as nuclear engineering, a fair comparison of different ML methods, and a clear understanding of their advantages and limitations, is of paramount importance. To address this, we introduce a Common Task Framework (CTF) for ML in nuclear engineering, building upon previous efforts in dynamical systems and seismology. This CTF considers a curated set of datasets from different nuclear and nuclear-adjacent systems. The CTF evaluates the performance of a method on 12 established metrics, alongside a new paradigm focused on system monitoring from sparse measurements only. We illustrate the framework by benchmarking standard ML baselines against these datasets, revealing current method limitations. Our vision is to replace ad hoc comparisons with standardized evaluations on hidden test sets, raising the bar for rigour and reproducibility in scientific ML for the nuclear industry.
arXiv:2605.15551v1 Announce Type: new Abstract: Training large-scale deep neural networks (DNNs) is resource-intensive, making model compression a practical necessity. The widely accepted ''learning as compression'' hypothesis posits that training induces structure in network weights, which enables compression. Measuring this structure through Kolmogorov-Chaitin-Solomonoff (KCS) complexity is appealing, but existing estimators based on the Coding Theorem Method (CTM) and the Block Decomposition Method (BDM) are limited to small binary objects and do not scale to modern DNNs. We introduce the Quantized Block Decomposition method (QuBD), which extends algorithmic complexity estimation to any $k$-ary object. QuBD first quantizes the network weights to a finite alphabet, then estimates the KCS complexity by aggregating per bit-plane CTM estimates. We show theoretically that QuBD yields a strictly tighter estimation gap with respect to true KCS complexity than binarization-based methods. Using QuBD, we study how the algorithmic complexity of neural network weights evolves during training, showing that it decreases as models learn, scales with data budget, increases during overfitting, follows the delayed generalization observed during grokking, and correlates with generalization performance. We further show that algorithmic information resides predominantly in the most significant bit-planes, which can serve as a practical diagnostic for determining appropriate post-training quantization levels. This work offers novel insights into learning mechanisms in DNNs by providing the first scalable, tractable estimates of KCS complexity for large, non-binary objects such as DNN weights.
arXiv:2510.02307v2 Announce Type: replace Abstract: Text-to-image diffusion models often degrade when sampled at resolutions outside the final training resolution set. Prior work has largely emphasized higher resolution generation, enabling pretrained diffusion models to extrapolate beyond the resolutions seen during training. In this work, we instead target lower-resolution generation, performing inference at reduced resolution to significantly cut computational cost. We show that network conditioning of the noise level induces a train-test mismatch that directly degrades low-resolution generation: the same scheduled noise level can correspond to a different perceptual corruption level at lower resolutions, mis-calibrating the denoiser timestep and noise embedding. To this end, we propose NoiseShift, a training-free recalibration method that keeps the original noise sampling schedule unchanged and instead re-indexes the noise conditioning of the denoiser to restore local forward-reverse consistency. Using a lightweight coarse-to-fine calibration on a small set of image-text pairs, NoiseShift learns a resolution-specific mapping from scheduler noise to conditioning noise, reducing train-test mismatch and improving lower-resolution generation quality. When NoiseShift is applied to Stable Diffusion 3 (SD3), Stable Diffusion 3.5 (SD3.5), and Flux-Dev, generation quality at low resolutions improves consistently. Particularly, SD3 generation at 128x128 resolution gets an improved FID score from 203 to 171, and SD3.5 gets an improved FID score from 310 to 277 on LAION-COCO. Even Flux-Dev which already implements a complementary time-shifting strategy gets a modest boost from NoiseShift with an improved FID score from 120 to 113 at 64x64 resolution. More importantly, NoiseShift achieves such improvements with minimal implementation changes and no additional inference overhead.
arXiv:2605.15309v1 Announce Type: new Abstract: Despite remarkable progress, image generation is far from solved. The dominant metric, FID, conflates sample fidelity with mode coverage and is close to being saturated. Yet a model can still exhibit mode collapse while achieving a low FID, since a handful of sharp, near-duplicate images can outscore a model that faithfully covers the full data distribution. We argue that precision and recall are essential complements to FID, and that because FID is already saturated, the more meaningful goal is to improve diversity and coverage. Achieving high recall requires a model that explicitly prioritizes mode coverage, unlike most generative models, which optimize sample fidelity. We introduce RTM, which replaces the single-pass latent mapping in style-based generators with an iterative refinement process, and show that this consistently improves both quality and diversity. Integrated with Implicit Maximum Likelihood Estimation (IMLE), which optimizes mode coverage by design, RTM achieves the highest precision and recall among current state-of-the-art approaches while maintaining competitive FID, with improvements across CIFAR-10, CelebA-HQ at 256x256, and nine few-shot benchmarks. RTM also improves StyleGAN2 and StyleGAN2-ADA on CIFAR-10 and AFHQ-v1 at 512x512, demonstrating that the benefit is not specific to IMLE. Unlike flow-matching baselines that achieve competitive FID at the expense of coverage, recursive refinement improves both quality and diversity simultaneously.
arXiv:2605.15213v1 Announce Type: new Abstract: Diet quality is a leading determinant of chronic disease risk. Advances in artificial intelligence (AI) have enabled food recommendation systems to adapt suggestions to user preferences and health goals. However, most current systems rely on loosely curated food databases and provide limited connection to a validated index. In this study, we propose a Healthy Eating Index (HEI) informed retrieval-augmented generation (RAG) framework that combines standardized nutrition databases with large language models (LLMs) for personalized food recommendations. Our proposed method anchors retrieval in the National Health and Nutrition Examination Survey (NHANES) and the Food Patterns Equivalents Database (FPED). A food-level embedding space is constructed from FPED-derived textual descriptions. For each entity, the system computes baseline HEI scores, retrieves candidate foods for intake recommendations, and estimates the HEI impact of simple substitutions or additions. A constrained RAG pipeline instantiated with a pretrained OpenAI LLM generates personalized recommendations and sources based on nutrient profiles and HEI contributions. The simulation results showed a mean HEI improvement of 6.45, with the proportion of users HEI over 50 increasing from 45.12 to 61.26. Quantile analysis revealed consistent improved shifts across the HEI distribution. Our findings suggest that the proposed LLM-RAG-based AI systems can support more precise, explainable, and personalized nutrition guidance to improve diet quality.
arXiv:2605.15306v1 Announce Type: new Abstract: Data augmentation is widely recognized for improving generalization in deep networks, yet its impact on the geometry of learned representations remains poorly understood. In this work, we characterize how different data augmentation strategies reshape internal representations in neural networks. Using tools from shape analysis, we embed network hidden representations into a metric space where distance is invariant to scaling, translation, rotation and reflection. We show that increasing augmentation strength leads to well-behaved trajectories in this space, and that different augmentation types steer representations in distinct directions. Moreover, we investigate how neural representation shapes are distorted along data augmentation trajectories, and show that insights from neural geometry can predict which representations provide the most improvement when ensembling models. Our results reveal shared geometric patterns across architectures and seeds, and suggest that analyzing shape-space trajectories offers a principled tool for understanding and comparing data augmentation methods.
arXiv:2605.15351v1 Announce Type: new Abstract: Electrochemical impedance spectroscopy (EIS) is the most informative diagnostic for lithium-ion batteries: its frequency-resolved spectra decompose cell behavior into distinct electrochemical processes, revealing mechanism-specific degradation invisible to voltage and resistance measurements. Yet EIS requires dedicated hardware and minutes-long acquisitions incompatible with field deployment. Here we show that Lie Generator Networks (LGN), a structure-preserving identification framework, extract electrochemical time constants from 60 seconds of post-pulse voltage relaxation, data that battery management systems already collect, that encode the same diagnostic and prognostic information as impedance spectra. LGN learns the generator matrix of the relaxation dynamics with stability guaranteed by architecture, yielding time constants precise enough to resolve electrochemical variation that conventional curve fitting cannot detect from identical data. Across five datasets totaling over 850 cells, four institutions, and multiple chemistries, LGN tracks degradation with near-perfect rank correlation ($|\rho_s| = 0.999$), enables cross-validated reconstruction of full Nyquist spectra at 2% median error across 227 cells, predicts which capacity-matched cells fail first from three early diagnostics, and recovers Arrhenius activation energies with zero physics priors without retraining or cell-specific tuning. LGN requires no training data, no impedance hardware, and no chemistry-specific calibration, converting any existing relaxation pulse into an impedance-grade diagnostic. This enables real-time health monitoring, rapid second-life grading, production-line quality control, and physics-informed prognosis from minutes of measurement.
arXiv:2605.15329v1 Announce Type: new Abstract: Every BFT consensus protocol uses collision-resistant hashes to compare validator state. Collision resistance destroys distance: two validators agreeing on 19 of 20 transactions produce unrelated hashes, indistinguishable from validators sharing nothing. This forces three design constraints across the BFT literature: validators must synchronize state before voting, agreement quality cannot be measured until votes are counted, and hierarchical committees must be large enough for independent BFT, limiting tree depth. This paper introduces distance-preserving transaction digests, a primitive that replaces collision-resistant hashes with commutative vector sums in 8-dimensional space. The primitive has three properties hashes lack: distance is proportional to disagreement, weighted means are exact, and set differences are identifiable via bloom filter diff. We demonstrate three applications: a two-phase BFT protocol (Proxima) that achieves single-round finality when validators agree; tree-structured consensus with groups of 10 validators (vs 128 in Ethereum), enabled because distance filtering replaces per-group BFT; and cross-shard consistency verification at 128 bytes per shard pair, replacing the per-transaction coordination of two-phase commit. Safety is proved: fewer than N/3 Byzantine validators cannot cause conflicting finalization, independent of Phase 1 clustering or tree topology. At N =100,000, Proxima Tree uses 2.2x fewer messages than HotStuff (a structural property unaffected by parallelism). Single-core finality is 0.9s vs 18s for HotStuff; multi-core BLS narrows but does not eliminate this gap.
arXiv:2605.15446v1 Announce Type: new Abstract: The disaggregation of base stations into discrete RAN functions introduces new threats to mobile networks, as failures in one RAN function can trigger cascading failures and interrupt entire function chains, with potential to degrade network performance and disrupt service. In this paper, we propose the first resilience mechanism for disaggregated mobile networks that leverages the adaptive reinstantiation of RAN functions under uncertainty to mitigate disruptions and maintain service continuity in the presence of compromised infrastructure. Our mechanism reacts to cascading failures that disrupt Radio Units (RUs) by reinstantiating Central Units (CUs) and Distributed Units (DUs) in alternative cloud locations, restoring their function chains while accounting for uncertainty in users' locations and wireless channel conditions during the in-failure state. We formulate this recovery process as a two-stage stochastic optimization problem, where reinstantiation and routing decisions are made under uncertainty, and bandwidth allocation decisions are performed after uncertainty is resolved. We solve the problem using a Sample Average Approximation (SAA)-based solution as a tractable, deterministic equivalent problem. We numerically evaluate our approach on a real-world disaggregated mobile network topology across multiple failure scenarios and traffic demand conditions, and our results demonstrate that our solution can achieve up to 80% higher recovery performance compared to conventional resilience mechanisms.
arXiv:2605.15460v1 Announce Type: new Abstract: Cross-modal hashing enables efficient retrieval by encoding images and text into compact binary codes. State-of-the-art methods rely on semantic similarity graphs derived from user interactions for supervision, yet these graphs encode sensitive behavioral patterns vulnerable to link reconstruction attacks. Existing privacy-preserving approaches fail on graph-structured data: Differentially Private SGD destroys relational motifs by treating samples independently, while graph synthesis methods suffer from unbounded local sensitivity in scale-free networks, hub nodes cause single-edge modifications to alter triangle counts by $\mathcal{O}(N)$, necessitating prohibitive noise injection. We term this phenomenon Hubness Explosion. We propose DMP-MH, a Sanitize-then-Distill framework that decouples privacy from representation learning. Our approach first bounds sensitivity by deterministically clipping node degrees, capping the $L_2$-sensitivity of triangle motifs independently of dataset size. A sanitized synthetic graph is then generated via Noisy Mirror Descent under $(\epsilon,\delta)$-Edge Differential Privacy. Finally, dual-stream hashing networks distill this topology using a holistic structural loss that enforces cross-modal alignment. Evaluated on MIRFlickr-25K and NUS-WIDE under a strict inductive protocol, DMP-MH outperforms private baselines by up to 11.4 mAP points while retaining up to 92.5% of non-private performance.
arXiv:2605.15215v1 Announce Type: new Abstract: Recently, skills have been widely adopted in large language model (LLM)-based agent systems across various domains. In existing frameworks, skills are typically injected into the agent reasoning loop as contextual guidance once matched to a runtime task, enabling specialized task-solving capabilities. We find that this execution paradigm introduces two major sources of redundancy: irrelevant context injection and repeated skill-specific reasoning and planning. To this end, we propose SkillSmith, a boundary-first compiler-runtime framework that compiles skill packages offline into minimal executable interfaces. By extracting fine-grained operational boundaries from skills, SkillSmith enables agents to dynamically access and execute only the relevant components at runtime, thereby minimizing unnecessary context injection and redundant reasoning overhead. In the evaluation on SkillsBench benchmark, SkillSmith reduces solve-stage token usage by 57.44%, thinking iterations by 42.99%, solve time by 50.57% (2.02x faster), and token-proportional monetary cost by 57.44% compared with using raw-skills. Moreover, compiled artifacts produced by a stronger model can be reused by a smaller or more efficient runtime model, improving task accuracy in cases where raw skill interpretation fails. The source code and data are available at https://github.com/AetherHeart-AI/Aeloon.
arXiv:2605.15543v1 Announce Type: new Abstract: Many games of interest in the real world are often intractably large, thereby necessitating the use of game abstraction to shrink them in size, typically by many magnitudes. Over the last two decades, there have been significant advances in game abstraction; however, the domain-specific nature (usually poker) of much of the prior work prevents those techniques from being easily generalized to other settings without extensively analyzing the game at hand. In this paper, we propose a domain-independent approach to game abstraction, which applies word embedding techniques from the field of natural language processing. Treating each action as a word and gameplay data as a corpus, word vectors can be trained to represent each action as a real-valued vector, which can then be clustered to facilitate game abstraction. We also explore the use of foundational embedding models and show that action embeddings obtained this way can capture a surprising amount of information about the underlying game. Experimental results demonstrate that our proposed game abstraction technique is effective, although it does not outperform specialized algorithms tailored to specific games.
arXiv:2605.15488v1 Announce Type: new Abstract: Survival analysis provides a powerful statistical framework for modeling time-to-event outcomes in the presence of censoring. However, selecting an appropriate estimator from the many specialized survival approaches often requires substantial methodological and domain expertise. We introduce SurvivalPFN, a prior-data fitted network that amortizes Bayesian inference for censored observations through in-context learning. SurvivalPFN is pretrained on a diverse family of synthetic, identifiable, and right-censored data-generating processes, enabling it to amortize survival analysis in a single forward pass during inference. As a result, the model adapts to the effective complexity of each dataset without task-specific training or hyperparameter tuning, avoids restrictive parametric assumptions, and produces calibrated survival distributions. In a large-scale benchmark spanning 61 datasets, 21 methods, and 5 evaluation metrics, SurvivalPFN achieves strong predictive performance and often improves upon established survival models. These results suggest that SurvivalPFN offers a principled and practical foundation model for survival analysis, with potential applications in high-impact domains such as healthcare, finance, and engineering (https://github.com/rgklab/SurvivalPFN).
arXiv:2605.15963v1 Announce Type: new Abstract: Large vision-language models have significantly advanced GUI agents, enabling executable interaction across web, mobile, and desktop interfaces. Yet these gains largely rely on a forgiving region-tolerant paradigm, where many nearby pixels inside the same component remain valid. Precise geometric construction breaks this assumption: actions must land on points in continuous canvas space rather than tolerant regions. Because geometric primitives carry ontological dependencies, a local coordinate error can induce cascading topological failures that distort downstream objects and invalidate the final construction. We identify this regime as precision-sensitive GUI tasks, requiring point-level accuracy, geometry-aware verification, and robustness to dependency-driven error propagation. To benchmark it, we introduce PAGE Bench, with 4,906 problems and over 224K process-supervised, pixel-level GUI actions. We further propose PAGER, a topology-aware agent that decomposes construction into dependency-structured planning and pixel-level execution. Pixel-grounded supervised tuning establishes executable action grammar, while precision-aligned reinforcement learning mitigates rollout-induced exposure bias through state-conditioned geometric feedback. Experiments reveal a pronounced Semantic-Execution Gap: general multimodal models can exceed 88% action type accuracy yet remain below 6% task success. PAGER closes this gap, delivering 4.1x higher task success than the strongest evaluated general baseline and raising step success rate from below 9% for GUI-specialized agents to over 62%, establishing a new state of the art for point-precise GUI control.
arXiv:2603.09650v2 Announce Type: replace Abstract: Toroidal topologies and helicity are pervasive in nature and hold basic importance in scientific research. In particular, the interplay between these features gives rise to fascinating toroidal helical electromagnetic excitations. Here, we present a theoretical framework and experimental realization to introduce a family of toroidal helical pulses, exploring the intersection of the helicity and propagating toroidal modes. For this purpose, we propose a configuration combining a coaxial horn emitter and an equiangular spiral grating to directly generate such single-cycle pulses. In addition to their inherent non-transverse toroidal topology and space-time nonseparability, such pulses also possess controllable helicity. This work gives rise to a helical version of propagating toroidal electrodynamics, thereby paving the way for advanced applications, such as nontrivial light-matter interactions and data transfer.
arXiv:2605.15524v1 Announce Type: new Abstract: Point cloud learning often rests on the premise that observed samples are noisy traces of an underlying geometric object, such as a manifold embedded in a high-dimensional feature space. Yet much of this geometry is not captured directly by coordinates, pairwise distances, or learned graph neighborhoods alone. In the smooth setting, differential forms are devices to encode higher order tangency information. In this work, we introduce a new family of principled learnable geometric features for point clouds called neural point-forms (NPFs). In the absence of a natural tangency structure, we instead use Laplacian-based techniques from Diffusion Geometry to build a discrete model for comparing differential forms on point clouds via inner products. In the continuum, submanifolds of a shared ambient feature space are represented as comparison matrices, whose entries describe how pairs of feature forms interact with extrinsic tangency information. We make this intuition precise by proving the long-run consistency of comparison matrices under standard sampling, bandwidth, density, and manifold-hypothesis assumptions. This yields a compact, efficient and permutation-invariant neural layer whose output is a learned form-comparison matrix. Across synthetic and biologically relevant experiments, we show that NPFs provide a competitive, and interpretable representation, with the strongest benefits appearing when labels depend on sampling density, manifold-like structure, or response-relevant population geometry.
arXiv:2605.15536v1 Announce Type: new Abstract: Previous imitation learning policies predict future actions at every control step, whether in smooth motion phases or precise, contact-rich operation phases. This uniform treatment is wasteful: most steps in a manipulation trajectory traverse free space and carry little task-relevant information, while a small fraction of \emph{key} steps around contacts, grasps, and alignment demand dense, high-resolution prediction. We propose a novel \emph{action relabeling} mechanism: at each timestep in a skip segment, we replace the behavior cloning target with the action at the entrance of the next key segment, enabling the policy to leap over redundant steps in a single decision. The resulting \textbf{Skip Policy (SkiP)} dynamically leaps over skip segments and intensively refines actions in key segments, within a single unified network requiring no learned skip planner or hierarchical structure. To automatically partition demonstrations into key and skip segments without manual annotation, we introduce \emph{Motion Spectrum Keying} (MSK), a fast, task-agnostic procedure that detects local motion complexity from action signals. Extensive experiments across 72 simulated manipulation tasks and three real-robot tasks show that SkiP reduces executed steps by $15$--$40\%$ while matching or improving success rates across various policy backbones. Project page: \texttt{https://pgq18.github.io/SkiP-page/}.
arXiv:2605.15564v1 Announce Type: new Abstract: Generative models trained on public databases of protein structures, most of which have been determined by X-ray crystallography, now provide powerful priors for structure prediction. However, they are not readily conditioned on the measurements from a new crystallographic experiment, limiting their use for X-ray structure determination. In crystallography, the measured structure-factor amplitudes do not by themselves determine an electron density map or atomic structure because the associated phases are unobserved and must be inferred. Structure determination therefore remains an inverse problem in which candidate models must be both structurally plausible and consistent with measured diffraction data, often requiring substantial manual refinement by human experts. Emerging methods aim to incorporate experimental information more directly into predictive and refinement workflows. We present CrystalBoltz, a generative framework that casts crystallographic refinement as Bayesian inference over atomic structures and operates directly on structure-factor amplitudes. CrystalBoltz moves from unguided generation with a pre-trained prior over protein structures to experiment-guided posterior sampling, followed by atomic coordinate and B-factor refinement. Across multiple protein crystallography datasets, CrystalBoltz attains lower coordinate RMSD and lower R-factors than the strongest baselines considered, while reducing runtime by a factor of 33 relative to existing experimentally guided refinement.
arXiv:2605.15565v1 Announce Type: new Abstract: Reinforcement learning (RL) is increasingly used to improve the reasoning, coding, and tool-use capabilities of large language models, but agentic RL remains prohibitively expensive. Scaling RL to agentic LLMs requires supporting complex workloads, including multi-policy collaborative training, while efficiently using elastic, heterogeneous, and cross-region compute resources. Existing LLM RL systems support some of these capabilities, but each new extension often requires dedicated system engineering. This burden arises from trainer-centered control architectures and the lack of principled abstractions for RL system components. To address these limitations, we propose AstraFlow, a dataflow-oriented RL system that replaces conventional trainer-centered control with principled component abstractions. In AstraFlow, rollout services, dataflow management, and training are decoupled into autonomous components, enabling the system to natively support complex multi-policy agentic RL workloads and efficiently exploit diverse compute resources. We evaluate AstraFlow across math, code, search, and AgentBench workloads, showing that the same system supports multi-policy training, elastic scaling, heterogeneous cross-region execution, and composable data algorithms without system-level code changes. In multi-policy collaborative training, AstraFlow achieves comparable or better accuracy than existing RL systems while speeding up training time by 2.7x.