arXiv:2605.15835v1 Announce Type: new Abstract: Automated plankton image recognition is increasingly used in aquatic ecosystem monitoring, but deployed classifiers inevitably encounter unseen taxa and non-target particles. Open-set recognition methods are usually evaluated with sample-level metrics such as AUROC, AUPR, and FPR@95% unknown-recall operating points, whereas ecological monitoring depends on community-level estimates of taxon abundance and diversity. This study examines the mismatch between these objectives using controlled pseudo-communities and three datasets spanning marine zooplankton imaged by ZooScan, marine phytoplankton imaged by IFCB, and freshwater plankton imaged by an in-situ camera. We define Open-Set Community Distortion (OSCD), a Bray-Curtis-style error over known taxa plus an unknown bin, with directional components distinguishing known-taxon overestimation from underestimation. Closed-set classifiers achieved high known-class accuracy, but unknown samples were often absorbed with high confidence and in structured ways. Sample-level OOD metrics were not sufficient to select ecological operating points: for MSP, FPR@95% unknown-recall thresholds produced large test-community OSCD on all three datasets mainly because true known taxa were over-rejected into the unknown bin. Community-aware threshold calibration reduced MSP OSCD relative to fixed 95% known recall on SYKE-ZooScan 2024 and SYKE-IFCB 2022; on ZooLake the fixed-recall baseline was already close to the community-aware threshold, and the best community-level method was a prototype-distance variant rather than MSP. The benefit of community-aware calibration therefore depends on validation-community representativeness and the gap between fixed recall and the community optimum. These results show that open-set plankton recognition should be evaluated as an ecological measurement problem, not only as a sample-level detection task.
Science Journals
arXiv:2605.15235v1 Announce Type: new Abstract: Multimodal physiological data powers clinical AI systems from intensive care units to wearable devices, but sensors routinely fail in practice. Two failure modes are common: modality missing, where an entire channel is absent, and within-modality missing, where a contiguous time segment is lost. No existing benchmark evaluates multiple fusion architectures under both failure modes at controlled severity levels across diverse clinical datasets. We present MuteBench, a benchmark covering 9 datasets from 7 clinical domains, 6 fusion architectures, and 2 missing-data modes over 125,000 samples. Through this benchmark, we find that architecture family is the strongest predictor of robustness, outweighing parameter count. Channel-independent models tolerate modality missing well but can be sensitive to within-modality missing, especially on short sequences. Curriculum modality dropout protects reliably only up to the maximum dropout rate used in training. We also find that channel count, sequence length, and modality alignment jointly determine which failure mode poses the greater threat. Finally, a PTB-XL case study suggests that diffusion-based imputation can improve downstream classification under within-modality missing, with the largest gains for models whose expert routing is most sensitive to corrupted inputs, though broader validation across datasets remains an open direction. MuteBench provides practitioners with concrete guidance for both selecting existing architectures and informing the design of future robust multimodal fusion methods.
arXiv:2605.15840v1 Announce Type: new Abstract: We investigate the fluorescence and relaxation dynamics of Cs atoms embedded in a cryogenic argon matrix using spectroscopy measurements combined with diatomic-in-molecule (DIM) simulations. The data reveal complex emission spectra, large Stokes shifts, and slow relaxation effects, indicating strong host-guest interactions and substantial lattice reorganization. Although the spectra are superimposed on a broad background, possibly due to low-symmetry, defect-related, or grain-boundary trapping sites, the main spectral structure is consistent with two dominant trapping environments that give rise to two triplet absorption features with distinct fluorescence behavior of the doublet and singlet components. Polarization measurements further suggest that these sites may differ in symmetry, although a unique structural assignment remains difficult
arXiv:2509.22739v3 Announce Type: replace Abstract: Language models (LMs) are typically post-trained for desired capabilities and behaviors via weight-based or prompt-based steering, but the former is time-consuming and expensive, and the latter is not precisely controllable and often requires manual trial-and-error. While activation steering (AS) promises a cheap, fast, and controllable alternative to the two existing post-training methods, current AS techniques require hand-crafted prompt pairs or labor-intensive feature annotation, making them more inconvenient than the plug-and-play methods such as Reinforcement Learning (RL) and Supervised Fine-Tuning (SFT). We introduce Painless Activation Steering (PAS), a family of fully automated methods that make AS readily usable with any given labeled dataset, with no need for prompt construction, feature labeling, or human intervention. We evaluate PAS on three open-weight models (Llama3.1-8B-Instruct, DeepSeek-R1-Distill-8B, and Nous-Hermes-2) and 18 tasks; we find that PAS reliably improves performance for behavior tasks, but not for intelligence-oriented tasks. The introspective variant (iPAS) delivers the strongest causal steering effects (10.1% on Bias, 5.2% on Morality, and 34.8% on Alignment). We also show PAS delivers additional gains on top of In-Context Learning (ICL) and SFT. PAS constructs a fast, lightweight activation vector that can be cheaply trained, easily stored, and activated at will. Our results provide a characterization of where AS helps, where it fails, and how to deploy it as a practical, automated LM post-training option.
arXiv:2601.13529v2 Announce Type: replace Abstract: Cervical cancer accounts for a significant portion of the global cancer burden among women. Interstitial brachytherapy (ISBT) is a standard procedure for treating cervical cancer; it involves placing a radioactive source through a straight hollow needle within or in close proximity to the tumor and surrounding tissue. However, the use of straight needles limits surgical planning to a linear needle path. We present the OncoReach stylet, a handheld, tendon-driven steerable stylet designed for compatibility with standard ISBT 15- and 13-gauge needles. Building upon our prior work, we evaluated design parameters like needle gauge, spherical joint count and spherical joint placement, including an asymmetric disk design to identify a configuration that maximizes bending compliance while retaining axial stiffness. Free space experiments quantified tip deflection across configurations, and a two-tube Cosserat rod model accurately predicted the centerline shape of the needle for most trials. The best performing configuration was integrated into a reusable handheld prototype that enables manual actuation. A patient-derived, multi-composite phantom model of the uterus and pelvis was developed to conduct a pilot study of the OncoReach steerable stylet with one expert user. Results showed the ability to steer from less-invasive, medial entry points to reach the lateral-most targets, underscoring the significance of steerable stylets.
arXiv:2605.03548v2 Announce Type: replace Abstract: Reconstructing PDE-governed fields from sparse and irregular measurements is challenging due to their ill-posed nature. Deterministic surrogates are trained on dense fields that struggle with limited measurements and uncertainty quantification. Generative models, by learning distributions over spatiotemporal fields, can better handle sparsity and uncertainty. However, existing generative approaches enforce data consistency and PDE constraints simultaneously via sampling-time gradient guidance, resulting in slow and unstable inference. To this end, we propose PerFlow, a Physics-embedded rectified Flow for efficient sparse reconstruction and uncertainty quantification of spatiotemporal dynamics. PerFlow decouples observation conditioning from physics enforcement, performing guidance-free conditioning by feeding observations into rectified-flow dynamics while embedding hard physics via a constraint-preserving projection (e.g., incompressibility or conservation). Theoretically, we establish invariance guarantees to ensure that trajectories remain on the physics-consistent manifold throughout sampling. Experiments on various PDE systems demonstrate competitive reconstruction accuracy with sound physics consistency, while enabling efficient conditional sampling (e.g., 50 steps) and up to 320x faster inference than 2000-step guided diffusion baselines.
arXiv:2605.15844v1 Announce Type: new Abstract: In this study, we develop an interface-contact simulation framework based on physical criteria and machine-learning-assisted classification to describe coalescence and bouncing within a unified formulation. The framework realizes interfacial coalescence and bouncing through the fusion and generation of multiple volume-of-fluid fields. When adjacent interfaces are predicted to coalesce, multiple VOF fields are collapsed into a single VoF field. When approaching interfaces are predicted to bounce, a single VOF field is regenerated into multiple VOF fields, allowing the interfaces to continue evolving independently. With this treatment, the difficulties associated with topological transition, regime-map identification, increasing computational demand, and stochastic behavior during interfacial approach are separated from the interface-tracking procedure. These decisions are instead assigned to a physics-guided machine-learning model with strong adaptability. This strategy avoids the direct resolution of an ultrathin gas film and reduces the dependence on empirical molecular-force parameters. Simulations of droplet--droplet collisions show that the proposed framework can reproduce both coalescence and bouncing over different impact conditions. By further introducing a drainage-time criterion, the framework is extended to the simulation of droplet impact on a liquid surface. For this problem, the numerical results agree well with both previous experimental observations and the present experiments. Moreover, the framework captures the complete sequence of bouncing followed by subsequent coalescence within a single simulation, These results demonstrate that the proposed framework has strong adaptability for interfacial contact problems and provides a unified modeling route for droplet coalescence, bouncing.
arXiv:2605.02960v2 Announce Type: replace Abstract: Production LLM workloads increasingly serve discriminative tasks, such as classification, recommendation, and verification, whose answers are read from the logits of a single prefill pass with no autoregressive decoding. Serving these prefill-only workloads on mixture-of-experts (MoE) models is bottlenecked not by compute but by the distributed execution required to fit the model: existing parallel strategies (tensor, expert, and pipeline parallelism) trade memory pressure for redundant computation, communication, and synchronization, severely degrading MoE prefill serving efficiency. We observe that these overheads stem from coupling expert placement with synchronous activation routing -- a design inherited from the decoding era. The long, compute-bound forward passes of large-batch prefill open a per-layer window wide enough to stream expert weights in the background, replacing per-layer activation AllToAll with asynchronous weight AllGather fully overlapped with computation. We propose MoE-Prefill, a prefill-only serving system whose backend, AsyncEP (Asynchronous Expert Parallelism), gathers experts by weight rather than routing them by activation, and whose frontend co-enforces a physically-derived saturation threshold through prefix-aware routing and true-FLOPs load tracking. On Qwen3-235B-A22B across four hardware/precision configurations, MoE-Prefill delivers 1.35-1.37x throughput over the strongest distributed baseline on real-world workloads and up to 1.59x on long-context synthetic workloads, sustaining 29.8-36.2% per-GPU model FLOPs utilization.
arXiv:2605.15472v1 Announce Type: new Abstract: We introduce the Estimated Dynamic Equilibrium Model (EDEM), an agent-based framework that treats supply and demand as a coupled stochastic process driven by heterogeneous, noisy agent valuations. The model's primary technical contribution is the identification of a generative mechanism for persistent disequilibrium: when market-clearing prices are sequentially sampled from the upper tail of noisy bid distributions and recycled as inputs for future valuations, expected prices drift upward despite strictly zero-mean estimation errors. We derive this order-statistic bias in closed form for i.i.d. uniform bids and use simulations to show that compounding this bias across epochs yields exponential price growth without requiring assumptions of investor optimism or irrationality. This framework extends Miller's divergence-of-opinion theory to a dynamic setting, recovering Walrasian equilibrium and Miller's static premium as limiting cases. Through controlled experiments and sensitivity analysis on a simulated real-estate neighborhood, we identify six distinct regimes-ranging from band-stability to runaway bubbles-emerging from a single agent ruleset. These results offer a potential explanation for the contradictory findings in the empirical divergence-of-opinion literature and suggest that machine-learning valuation algorithms may inadvertently amplify this inherent statistical bias.
arXiv:2602.03812v2 Announce Type: replace Abstract: Model distillation enables efficient emulation of frontier large language models (LLMs), creating a need for robust mechanisms to detect when a third-party student model has trained on a teacher model's outputs. However, existing fingerprinting techniques that could be used to detect such distillation rely on heuristic perturbations that impose a steep trade-off between generation quality and fingerprinting strength, often requiring significant degradation of utility to ensure the fingerprint is effectively internalized by the student. We introduce antidistillation fingerprinting (ADFP), a principled approach that aligns the fingerprinting objective with the student's learning dynamics. Building upon the gradient-based framework of antidistillation sampling, ADFP utilizes a proxy model to identify and sample tokens that directly maximize the expected detectability of the fingerprint in the student after fine-tuning, rather than relying on the incidental absorption of the un-targeted biases of a more naive watermark. Experiments on GSM8K, OASST1, and MBPP demonstrate that ADFP achieves a significant Pareto improvement over state-of-the-art baselines, yielding stronger detection confidence with minimal impact on utility across mathematical reasoning, dialogue, and code generation, even when the student model's architecture is unknown.
arXiv:2605.14309v2 Announce Type: replace Abstract: Machine unlearning in Vision-Language Models (VLMs) is typically performed at the image or instance level, making it difficult to precisely remove target knowledge without affecting unrelated semantics. This issue is especially pronounced since a single image often contains multiple entangled concepts, including both target concepts to be forgotten and contextual information that should be preserved. In this paper, we propose an interpretable concept-level unlearning framework for VLMs, which constructs a compact task-specific concept vocabulary from the forgetting set using a multimodal large language model. In addition to modality alignment, visual representations are decomposed into sparse, nonnegative combinations of semantic concepts, providing an explicit interface for fine-grained knowledge manipulation. Based on this decomposition, our method formulates unlearning as concept-level optimization, where target concepts are selectively suppressed while intra-instance non-target semantics and global cross-modal knowledge are preserved. Extensive experiments across both in-domain and out-of-domain forgetting settings demonstrate that our method enables more comprehensive target forgetting, better preserves non-target knowledge within the same image, and maintains competitive model utility compared with existing VLM unlearning methods.
arXiv:2505.15692v5 Announce Type: replace Abstract: Reinforcement learning (RL) has emerged as an effective paradigm for enhancing model reasoning. However, existing RL methods like GRPO typically rely on unstructured self-sampling to fit scalar rewards, often producing inefficient rollouts that fail to capture transferable problem-solving strategies. To address this limitation, we propose **TemplateRL**, a structured template-guided RL framework that augments policy optimization with explicit template guidance. Our approach first constructs a problem-solving template library via MCTS on a small seed set, then seamlessly integrates this high-level structured guidance into RL training. By guiding rollout generation to align with proven template structures, TemplateRL significantly improves high-quality trajectory hit rates while reducing ineffective exploration. This structure-guided design steers the policy toward validated strategic patterns, stabilizing training dynamics, and enhancing RL sampling efficiency. Notably, the explicit template library is interpretable, editable, and supports online updates-enabling continuous updates during both training and inference. Extensive experiments demonstrate that TemplateRL outperforms GRPO by 99% on AIME and 41% on AMC, with superior stability on weak models and remarkable cross-domain generalization, highlighting its potential for broader tasks.
arXiv:2511.04074v2 Announce Type: replace Abstract: Accurately modeling seismic wave attenuation is critical for ground response analyses (GRAs), which aim to replicate local site effects in ground motions. However, theoretical transfer functions (TTFs) from GRAs often overestimate empirical transfer functions (ETFs) when the small-strain damping ratio ($D_{\text{min}}$) is set equal to laboratory measurements. Prior studies addressed this by inflating $D_{\text{min}}$ in one-dimensional (1D) GRAs to account for apparent damping mechanisms such as diffraction and mode conversions that cannot be captured in 1D. Although this approach improved fundamental-mode predictions, it often overdamped higher modes. This study explores more direct modeling of apparent damping using two-dimensional (2D) GRAs at four downhole array sites: Delaney Park (DPDA), I-15 (I15DA), Treasure Island (TIDA), and Garner Valley (GVDA). At each site, three numerical damping formulations, Full Rayleigh, Maxwell, and Rayleigh Mass, were implemented using both conventional $D_{\text{min}}$ and an inflated $D_{\text{min}}$ ($m \times D_{\text{min}}$) obtained from site-specific calibration. Results show that the appropriate $D_{\text{min}}$ multiplier ($m$) correlates with the site's velocity contrast. Using inflated $D_{\text{min}}$, Full Rayleigh and Maxwell damping systematically overdamped higher modes, with Maxwell damping also shifting modal peaks. In contrast, Rayleigh Mass damping consistently achieved the closest match to ETFs at three of the four sites while offering faster computational performance. These findings demonstrate that inflated $D_{\text{min}}$ can represent unmodeled attenuation in 2D GRAs, particularly at sites with low velocity contrast, and that frequency-dependent formulations such as Rayleigh Mass damping can more accurately predict site response than traditional frequency-independent approaches.
arXiv:2602.19069v2 Announce Type: replace Abstract: Recent years have witnessed tremendous progress in enabling LLMs to solve complex reasoning tasks such as math and coding. As we start to apply LLMs to harder tasks that they may not be able to solve in one shot, it is worth paying attention to their ability to construct intermediate stepping stones that prepare them to better solve the tasks. Examples of stepping stones include simplifications, alternative framings, or subproblems. We study properties and benefits of stepping stones in the context of modern reasoning LLMs via ARQ (Asking the Right Questions), a simple framework that introduces a question generator to the default reasoning pipeline. We first show that good stepping stone questions exist and are transferrable, meaning that good questions can be generated, and they substantially help LLMs of various capabilities in solving the target tasks. We next frame stepping stone generation as a post-training task and show that we can fine-tune LLMs to generate more useful stepping stones by SFT and RL on synthetic data.
arXiv:2602.21141v2 Announce Type: replace Abstract: Object perception is fundamental for tasks such as robotic material handling and quality inspection. However, modern supervised deep-learning models require large annotated datasets for robust automation under semi-uncontrolled conditions; a major barrier for widespread deployment with proprietary industrial parts. We address this through an integrated framework combining synthetic data generation and structured empirical evaluation for systematic investigation of bidirectional sim-to-real transfer. Our method integrates 2D-to-3D Reality-to-Simulation techniques for 3D asset creation from physical parts with programmatic Guided Domain Randomization (GDR) via SynthRender, an open-source synthetic image generation framework. Structured ablation studies across multiple benchmarks quantify the impact of individual rendering design choices, yielding practical guidelines for dataefficient synthetic training. To support evaluation under realistic industrial conditions, we introduce Industrial Real-Sim Imagery Set (IRIS), a 32-class dataset with diverse textures, intra-class variation, strong inter-class similarities, and 19,672 annotations, providing both CAD models and reconstructed meshes for bidirectional sim-to-real benchmarking. Across three industrial benchmarks, the proposed framework achieves highly competitive performance, reaching 99.1% mAP@50 on a public robotics dataset, 98.3% mAP@50 on an automotive benchmark, and 95.3% mAP@50 on IRIS.
arXiv:2605.15383v1 Announce Type: new Abstract: Microscopy images contain rich information about how cells respond to perturbations, making them essential to applications like drug screening. To quantify images, researchers often use representation extraction methods, and recent years have seen a proliferation of deep learning methods. While measuring the quality of these representations is essential, evaluation remains fragmented, with each proposed model evaluated on different tasks and datasets, using custom pipelines and metrics, making it difficult to fairly compare models. Here, we introduce MorphoHELM, a comprehensive open benchmark for evaluating feature extraction methods for Cell Painting, the most widely-used morphological profiling assay. MorphoHELM consolidates evaluation standards in the field, extends and corrects them to be more robust, and evaluates on the widest range of methods to date. A defining feature of the benchmark is that each task is evaluated at different degrees of batch effects (or technical noise), directly quantifying how the ability of methods to detect biological signal degrades as noise increases. Together, these properties enable MorphoHELM to detect trade-offs between methods, and we demonstrate that models that excel at certain kinds of biological signal are weaker at others. We show that no existing model outperforms classic computer vision analytic strategies across all settings, which remain the strongest general use-case representations. All datasets, code, and evaluation tools are publicly available at https://github.com/microsoft/MorphoHELM.
arXiv:2507.16806v2 Announce Type: replace Abstract: When language models (LMs) are trained via reinforcement learning (RL) to generate natural language "reasoning chains", their performance improves on a variety of difficult question answering tasks. Today, almost all successful applications of RL for reasoning use binary reward functions that evaluate the correctness of LM outputs. Because such reward functions do not penalize guessing or low-confidence outputs, they often have the unintended side-effect of degrading calibration and increasing the rate at which LMs generate incorrect responses (or "hallucinate") in other problem domains. This paper describes RLCR (Reinforcement Learning with Calibration Rewards), an approach to training reasoning models that jointly improves accuracy and calibrated confidence estimation. During RLCR, LMs generate both predictions and numerical confidence estimates after reasoning. They are trained to optimize a reward function that augments a binary correctness score with a Brier score -- a scoring rule for confidence estimates that incentivizes calibrated prediction. We first prove that this reward function (or any reward function that uses a bounded, proper scoring rule) yields models whose predictions are both accurate and well-calibrated. We next show that across diverse datasets, RLCR substantially improves calibration with no loss in accuracy, on both in-domain and out-of-domain evaluations -- outperforming both ordinary RL training and classifiers trained to assign post-hoc confidence scores. While ordinary RL hurts calibration, RLCR improves it. Finally, we demonstrate that verbalized confidence can be leveraged at test time to improve accuracy and calibration via confidence-weighted scaling methods. Our results show that explicitly optimizing for calibration can produce more generally reliable reasoning models. Code, models, and further info is available at https://rl-calibration.github.io/.
arXiv:2306.08793v5 Announce Type: replace Abstract: Imaging through complex scattering media is severely limited by aberrations and scattering which obscure images and reduce resolution. Confocal and temporal gatings partly filter out multiple scattering but are severely degraded by wavefront distortions. Adaptive optics restore resolution by correcting low-order aberrations and matrix-based imaging enables more complex wavefront corrections. However, they struggle to undo high-order aberrations under strong scattering, preventing imaging at greater depths. To address these challenges, we present Scattering Matrix Tomography (SMT), an approach that makes full use of the wavefront engineering capability of scattering matrix and extreme adaptive optics. SMT reformulates imaging through complex media as a numerical optimization and employs Zernike-mode wavefront regularization and coarse-to-fine nonconvex optimization strategy to reverse severe aberrations, enabling noninvasive high-resolution volumetric imaging in multiple scattering regime. Based on the spectrally-resolved matrix measurement, SMT achieves a depth-over-resolution ratio above 900 beneath $ex~vivo$ mouse brain tissue and volumetric imaging at over three transport mean free paths inside an opaque colloid, where conventional methods fail to correct strong aberrations under these challenging conditions. SMT is noninvasive, label-free, and works both inside and outside the scattering media, making it suitable for various applications, including medical imaging, biological science, device inspection, and colloidal physics.
arXiv:2510.27185v3 Announce Type: replace Abstract: A dual-scale deployment (DSD) framework is proposed for pinching antenna systems (PASS), under which four protocols are provided. 1) For the coarse-scale deployment, the pinching antenna (PA) is transferred over a large-scale range at the waveguide level. 2) For the fine-scale deployment, the PA is adjusted with high precision within a small-scale region. By simultaneously optimizing both scales, the proposed DSD framework can unleash the full potential of PA deployment, while maintaining low computational complexity. Based on this framework, we establish a practical power consumption model and derive theoretical energy efficiency expressions for PASS. Then, an energy-efficiency maximization problem is formulated to jointly optimize the transmit precoding, PA radiation power, and dual-scale PA deployment. To solve this non-convex, highly coupled problem, a low-complexity penalty-based alternating optimization algorithm is proposed. Simulation results validate the accuracy of theoretical results and the convergence of the proposed algorithm. It is demonstrated that the proposed DSD framework is highly effective for PASS, delivering about $70\%$ higher energy efficiency than the conventional cell-free architecture and nearly a \emph{twofold} improvement relative to MIMO systems.
arXiv:2509.11002v2 Announce Type: replace Abstract: Controlling turbulent dynamics remains a major challenge because of its chaotic, multi-scale dynamics, which strongly influence the performance of many fluid systems. Here we report REACT (Reinforcement Learning for Environmental Adaptation and Control of Turbulence), an autonomous reinforcement learning framework for real-time state-dependent control of turbulent wake dynamics in a real wind-tunnel environment. Deployed on an Ahmed-body model equipped solely with onboard sensors and servo-actuated surfaces, REACT learns directly from sparse experimental measurements in a wind-tunnel environment, bypassing empirical turbulence models. The agent autonomously converges to a policy that reduces aerodynamic drag while achieving net energy savings. Without prior knowledge of flow physics, it discovers that dynamically suppressing spatiotemporally coherent flow structures in the bluff-body wake maximizes energy efficiency, achieving two to four times greater performance than model-based baseline controllers. We contrast the state-dependent, dynamics-aware policy of REACT with representative quasi-steady, mean-flow-oriented policies learned by standard reinforcement learning baselines, which deliver lower drag reduction and no direct suppression of coherent instabilities in this turbulent-wake regime. Finally, by training in a nondimensional state-reward space whose amplitudes are approximately Reynolds-number-invariant, and by conditioning on Reynolds number for temporal adaptation, REACT learns a single offline policy that remains effective across the tested Reynolds-number range 86,400 to 518,400, without retraining. These results demonstrate autonomous closed-loop reinforcement learning control in a high-Reynolds-number wind-tunnel environment and suggest a path toward data-driven state-dependent control of turbulent flows.
arXiv:2506.01732v3 Announce Type: replace Abstract: Large Language Models (LLMs) are pre-trained on large amounts of data from different sources and domains. Such datasets often contain trillions of tokens, including large portions of copyrighted or proprietary content, which raises questions about the legal use of such models. This underscores the need for truly open pre-training data that complies with data security regulations. In this paper, we introduce Common Corpus, the largest open dataset for LLM pre-training. The data assembled in Common Corpus are either uncopyrighted or under open licenses, totaling about two trillion tokens. The dataset contains a wide variety of languages, ranging from the high-resource European languages to some low-resource languages rarely represented in pre-training datasets. In addition, it includes a large amount of code data. The diversity of data sources in terms of covered domains and time periods opens up the paths for both research and entrepreneurial needs across diverse areas of knowledge. In this paper, we present the detailed provenance of data assembling and the details of dataset filtering and curation. We train two small language models on Common Corpus and find that they perform comparably to other models of their size, indicating that our dataset is suitable for multilingual pretraining. Common Corpus represents a key contribution to the ecosystem for open science research on Large Language Models.
arXiv:2503.23927v3 Announce Type: replace-cross Abstract: Detecting localized differences between two samples is a central task in scientific data analysis, required for the identification of signal events, regime changes, or model mismatch. We introduce EagleEye, a method that pinpoints local over- and under-densities in multivariate feature spaces. EagleEye assigns each point an anomaly score by encoding its ordered k-nearest-neighbour list as a binary membership sequence and testing whether the cumulative number of successes in this sequence is consistent with a binomial (coin-flipping) null model. In the presence of a genuine local anomaly, neighbours will preferentially belong to one of the two datasts, yielding an excess of ``successes'' relative to the binomial null model. These local, pointwise detections are consolidated into interpretable anomaly sets through a deterministic refinement procedure that can also estimate the irreducible background and local density anomaly purity. We demonstrate EagleEye's efficacy in three scenarios. We first consider an artificial data example with known localized over- and under-densities. Second, we demonstrate how EagleEye may be used for new physics searches at particle collider experiments in the presence of systematic background modelling differences. Finally, we conduct a climate analysis study that reveals localized changes in spatiotemporal temperature-pattern recurrence.
arXiv:2505.12601v2 Announce Type: replace Abstract: As large language models (LLMs) grow in scale and specialization, routing--selecting the best model for a given input--has become essential for efficient and effective deployment. While recent methods rely on complex learned routing strategies, their dependence on disparate training data and evaluation setups makes comparison and generalization difficult. In this work, we revisit LLM routing through the lens of simplicity. We show that a well-tuned k-Nearest Neighbors (kNN) approach not only matches but often outperforms state-of-the-art learned routers across diverse tasks. To support systematic evaluation, we introduce a suite of standardized routing benchmarks spanning instruction-following, question-answering, and reasoning tasks, as well as the first multi-modal routing dataset involving visual inputs. Our findings reveal that the locality properties of model performance in embedding space enable simple non-parametric methods to achieve strong routing decisions with lower sample complexity than parametric approaches. This challenges the prevailing trend toward sophisticated architectures and highlights the importance of thoroughly evaluating simple baselines before investing in complex solutions. To support reproducibility and further exploration, we will release all benchmarks and code upon publication.
arXiv:2605.15798v1 Announce Type: new Abstract: Complex systems display emergent phenomena that vary significantly across spatial and temporal scales. These variations originate from fine-grained system processes, yet arriving at macroscopic dynamics from micro-level data -- particularly when large, high-resolution datasets are available -- remains a persistent challenge. Here we develop event-based spatiotemporal networks, a computational modelling framework that encodes system processes as discrete events anchored in space and time. Event-based spatiotemporal networks offer a unified, flexible and efficient approach to generate emergent behaviour in complex systems across space and time from these events. We demonstrate the effectiveness of event-based spatiotemporal networks through two illustrative real-world applications. First, following a local outbreak of a novel respiratory pathogen in the Netherlands, spatiotemporal networks enable fine-grained tracking of transmission routes and infection patterns through space and time. Second, we use spatiotemporal networks to model propagation of delays in a public transportation system (S-bahn) around Z\"urich, Switzerland. We also discuss broader uses of event-based spatiotemporal networks in fields like developmental biology and community ecology, where focusing on events rather than static system states can improve data analysis, simulation, and collection strategies.
arXiv:2510.13842v2 Announce Type: replace Abstract: Knowledge poisoning poses a critical threat to Retrieval-Augmented Generation (RAG) systems by injecting adversarial content into knowledge bases, tricking Large Language Models (LLMs) into producing attacker-controlled outputs grounded in manipulated context. Prior work highlights LLMs' susceptibility to misleading or malicious retrieved content. However, real-world fact-checking scenarios are more challenging, as credible evidence typically dominates the retrieval pool. To investigate this problem, we extend knowledge poisoning to the fact-checking setting, where retrieved context includes authentic supporting or refuting evidence. We propose \textbf{ADMIT} (\textbf{AD}versarial \textbf{M}ulti-\textbf{I}njection \textbf{T}echnique), a few-shot, semantically aligned poisoning attack that flips fact-checking decisions and induces deceptive justifications, all without access to the target LLMs, retrievers, or token-level control. Extensive experiments show that ADMIT transfers effectively across 4 retrievers, 11 LLMs, and 4 cross-domain benchmarks, achieving an average attack success rate (ASR) of 86\% at an extremely low poisoning rate of $0.93 \times 10^{-6}$, and remaining robust even in the presence of strong counter-evidence. Compared with prior state-of-the-art attacks, ADMIT improves ASR by 11.2\% across all settings, exposing significant vulnerabilities in real-world RAG-based fact-checking systems.