arXiv:2605.18384v1 Announce Type: new Abstract: University extension activities play a fundamental role in bridging the gap between academia and society by fostering the socialization of scientific knowledge. This study reports and analyzes an outreach activity conducted in a public space, involving undergraduate students enrolled in Physics I, Physics III, and Physics IV courses within the Physics Teacher Education Program at the State University of the Tocantina Region of Maranhao (UEMASUL). The activity was developed through the design and presentation of didactic experiments using low-cost materials. Its main objectives were to disseminate fundamental physics concepts to the community, stimulate public interest in science, and provide pre-service teachers with a formative experience integrating theory, practice, and social responsibility. Data were collected from questionnaires adminisvelopment of communication skills, and the strengthening of the university's social role, while also fostering scientific curitered to visitors (n = 52). The results indicate that the activity significantly contributed to student learning, the deosity among participants.
Science Journals
arXiv:2605.17593v1 Announce Type: new Abstract: Active 3D reconstruction of moving objects requires selecting informative viewpoints while accounting for object motion uncertainty during the decision-to-execution delay. Existing methods address only parts of this problem: next-best-view (NBV) planners for object reconstruction typically optimize surface coverage but assume static objects, while motion-aware active perception for moving targets accounts for target motion but prioritizes tracking or visibility over reconstruction coverage. This work presents a motion-uncertainty-aware NBV framework for reconstructing an unknown rigid object undergoing planar motion, using noisy planar position measurements of the object and depth observations from a mobile robot. The key idea is to evaluate each candidate viewpoint by its expected observation quality over plausible future object states induced by motion and measurement uncertainty, rather than at a single predicted object pose. To obtain this predictive belief, a fixed-lag Gaussian Process smoother estimates and predicts the object state from noisy position measurements. The resulting belief is used to generate candidate viewpoints around the predicted object location, filter them by reachability, and estimate their expected coverage-driven scores. Simulation and real-world experiments demonstrate improved reconstruction completeness over non-predictive NBV and prediction-only tracking methods, bridging coverage-driven active reconstruction and prediction-driven tracking.
arXiv:2605.18460v1 Announce Type: new Abstract: This work presents a novel variant of the Firefly Algorithm (FA) for data clustering, addressing limitations of traditional methods like K-Means that struggle with non-uniform cluster shapes, densities, and the need for pre-defining the number of clusters. The proposed algorithm introduces a centroid movement strategy and a multi-objective fitness function that balances compactness, separation, and a novel TSP-based navigation penalty. It automatically estimates the optimal number of clusters and dynamically adjusts cluster boundaries. Application to robotic sensor networks highlights its practical value, with experiments showing improved clustering quality and reduced intra-cluster path distances compared to K-Means. These results confirm the algorithm's robustness in complex spatial clustering tasks, with potential for future extensions to higher-dimensional and adaptive scenarios.
arXiv:2605.14947v2 Announce Type: replace Abstract: Stratospheric aerosol injection (SAI) is a solar radiation modification technique, proposed as an interim measure to offset warming while greenhouse gas (GHG) emissions are reduced. This paper discusses a possible SAI implementation route - an alternative to sulfate aerosols formed in situ - based on engineered solid particles having dedicated properties such as size, composition, surface chemistry, and traceable origin, supporting safety, controllability, and functionality needed for SAI systems. These engineered properties also open up options for any future multi-state coordination of SAI through two technical building blocks: (1) the SAI-induced radiative forcing (SRF) - the magnitude of the cooling effect attributable specifically to the SAI layer - as an operator-independent quantity, derivable from direct aerosol-layer measurements; and (2) particle traceability through identifying signatures embedded at production. Both could feed into a shared, publicly accessible monitoring database open to independent interrogation, addressing several governance challenges by anchoring compliance assessments in measurable parameters. Drawing on precedents from the Montreal Protocol, IAEA safeguards, and other regimes, we show that shared technical metrics have historically enabled multi-state cooperation, and we argue the same could apply to SAI. We describe a phased pathway in which the technical capabilities and coordination practices that would use them are developed and tested together, at scales orders of magnitude below operational deployment. To be clear - we regard SAI deployment as premature; the conditions under which it might be considered have not been met. The paper does not propose a governance framework; rather, it identifies technical infrastructure that could support a wide range of such frameworks.
arXiv:2605.18754v1 Announce Type: new Abstract: Multiview 3D evaluation assumes that the images being scored are observations of one static 3D scene. This assumption can fail in NVS and sparse-view reconstruction: inputs or generated outputs may contain artifacts, outlier frames, repeated views, or noise, yet still receive high 3D consistency scores. Existing reference-based metrics require ground truth, while ground-truth-free metrics such as MEt3R depend on learned reconstruction backbones whose failure modes are poorly characterized. We study this reliability problem by comparing neural reconstruction priors with classical geometric verification. We introduce \benchmark, a controlled robustness benchmark for multiview 3D consistency, and a parametric family that decomposes neural metrics into backbone, residual, and aggregation components. This family recovers MEt3R and yields variants up to $3\times$ more robust. Our analysis shows that VGGT, MASt3R, DUSt3R, and Fast3R can hallucinate dense geometry and cross-view support for unrelated scenes, repeated images, and random noise. We introduce COLMAP-based metrics that use matches, registration, dense support, and reconstruction failure as failure-aware consistency signals. On real NVS outputs and a structured human study, these metrics achieve up to $4\times$ higher correlation with human judgments than MEt3R.
arXiv:2605.17583v1 Announce Type: new Abstract: While existing text-to-speech (TTS) models exhibit high expressiveness, fine-grained control over composite instructions remains challenging due to the structural mismatch between discrete textual intents and continuous acoustic realizations. Inspired by human cognitive decoupling, we introduce AgentSteerTTS, a multi-agent closed-loop framework designed for intent-faithful expressive control of composite instructions. First, in our framework, an adversarial disentanglement agent mitigates speaker-emotion leakage by learning separable identity and emotion-prosody subspaces with leakage-suppressing regularization. Next, a Dual-Stream Anchoring Controller grounds abstract intents using a large-scale acoustic prototype library: a Retrieval Agent selects expressive anchors, while a Synthesis Agent fuses them into continuous control vectors via gated attention. Finally, a Fast-Slow Feedback Agent refines output intensity through latent gradient correction and resolves semantic-acoustic mismatches using high-level perceptual critique. Experiments on a composite-instruction benchmark and public test sets show that AgentSteerTTS yields consistent and significant improvements to the baselines, demonstrating the effectiveness of the proposed method.
arXiv:2605.18495v1 Announce Type: new Abstract: The characteristic impedance and the propagation coefficient are among the most important parameters for evaluating the acoustic performance of porous materials. This work investigates the influence of cylindrical modes in an impermeable tube and applies multiple microphones distributed along the tube circumference within the three-microphone framework to extend the valid frequency range of characteristic impedance measurement. During the extended broadband measurements, discontinuities or phase jumps are observed in the experimentally measured propagation coefficient of the porous material under test. A Bayesian inference is applied in a sequential manner to estimate the unwrapped propagation coefficient and characteristic impedance. The results demonstrate that the inferred parameters accurately capture the behavior of the transfer function, allowing accurate parameter estimation.
arXiv:2601.20888v3 Announce Type: replace-cross Abstract: We study sampling from posterior distributions in Bayesian linear inverse problems where $A$, the parameters to observables operator, is computationally expensive. In many applications, $A$ can be factored in a manner that facilitates the construction of a cost-effective approximation $\tilde{A}$. In this framework, we introduce Latent-IMH, a sampling method based on the Metropolis-Hastings independence (IMH) sampler. Latent-IMH first generates intermediate latent variables using the approximate $\tilde{A}$, and then refines them using the exact $A$. Its primary benefit is that it shifts the computational cost to an offline phase. We theoretically analyze the performance of Latent-IMH using KL divergence and mixing time bounds. Using numerical experiments on several model problems, we show that, under reasonable assumptions, it outperforms state-of-the-art methods such as the No-U-Turn sampler (NUTS) in computational efficiency. In some cases, Latent-IMH can be orders of magnitude faster than existing schemes.
arXiv:2605.18066v1 Announce Type: new Abstract: Cloud Virtual Disk (CVD) placement in Cloud Block Storage (CBS) is critical for resource efficiency and performance isolation. Existing schemes prioritize spatial load balancing by dispersing disks across pods based on configuration-derived load estimates. However, overload risk in CBS is fundamentally temporal. Even when average load is balanced, pods can still suffer transient congestion when the peaks of co-located disks align in time. Achieving complementary placement, which co-locates CVDs with offset peaks, is hard at provisioning time because new disks have no history from which to infer temporal phase. We present TIDAL, a CVD placement framework that recovers phase-aware signals for cold-start placement from an underused source: tenant-provided names and identifiers in provisioning metadata. TIDAL first uses LLMs to recover application semantics from noisy metadata such as project, VM, and disk names. It then translates these semantics into phase-aware temporal signals to guide complementary placement. To satisfy control-plane constraints, TIDAL adopts an offline-to-online design with teacher-student distillation, regex-based filtering, and prefix-aware caching, enabling CPU-only inference with millisecond-level latency. Evaluations driven by production traces show that TIDAL reduces overload frequency by 79.1% and P95 overload duration by 73.7% compared with the strongest baselines.
arXiv:2601.21458v2 Announce Type: replace Abstract: Modern deepfakes have evolved into localized and intermittent manipulations that require fine-grained temporal localization to mitigate severe digital security risks. The prohibitive cost of frame-level annotation makes weakly supervised methods a practical necessity, which rely only on video-level labels. To this end, we propose Reconstruction-based Temporal Deepfake Localization (RT-DeepLoc), a weakly supervised temporal forgery localization framework that identifies forgeries via reconstruction errors. Our framework uses a Masked Autoencoder (MAE) trained exclusively on authentic data to learn its intrinsic spatiotemporal patterns; this allows the model to produce significant reconstruction discrepancies for forged segments, effectively providing the missing fine-grained cues for accurate localization without demanding dense human annotations. To robustly leverage these indicators, we introduce a novel Asymmetric Intra-video Contrastive Loss (AICL). By focusing on the compactness of authentic features guided by these reconstruction cues, AICL establishes a stable decision boundary that enhances local discrimination while preserving generalization to unseen forgeries by advanced generative models. Extensive experiments on large-scale datasets, including LAV-DF, demonstrate that RT-DeepLoc achieves state-of-the-art performance in weakly-supervised temporal forgery localization.
arXiv:2511.13310v2 Announce Type: replace-cross Abstract: Computed tomography perfusion (CTP) and magnetic resonance perfusion (MRP) are widely used in acute ischemic stroke assessment and other cerebrovascular conditions to generate quantitative maps of cerebral hemodynamics. While commercial perfusion analysis software exists, it is often costly, closed source, and lacks customizability. This work introduces PyPeT, an openly available Python Perfusion Tool for head CTP and MRP processing. PyPeT is capable of producing cerebral blood flow (CBF), cerebral blood volume (CBV), mean transit time (MTT), time-to-peak (TTP), and time-to-maximum (Tmax) maps from raw four-dimensional perfusion data. PyPeT aims to make perfusion research as accessible and customizable as possible. This is achieved through a unified framework in which both CTP and MRP data can be processed, with a strong focus on modularity, low computational burden, and significant inline documentation. PyPeT's outputs can be validated through an extensive debug mode in which every step of the process is visualized. Additional validation was performed via visual and quantitative comparison with reference perfusion maps generated by three FDA-approved commercial perfusion tools and a research tool. These comparisons show a mean SSIM around 0.8 for all comparisons, indicating a good and stable correlation with FDA-approved tools. The code for PyPeT is openly available at our GitHub https://github.com/Marijn311/CT-and-MR-Perfusion-Tool
arXiv:2605.16015v2 Announce Type: replace Abstract: Deep Reinforcement Learning (DRL) for quadrotor flight control typically relies on Domain Randomization (DR) for sim-to-real transfer, resulting in overly conservative policies that struggle with dynamic disturbances. To overcome this, we propose a novel adaptive control architecture that actively perceives and reacts to instantaneous perturbations. First, we train an optimal outer-loop policy, then replace its reliance on ground-truth disturbance data with a Residual Dynamics Predictor (RDP). The RDP estimates the external forces and moments acting on the aircraft in flight online using only the history of states and control actions. For seamless hardware transfer, we introduce a data-efficient linear calibration bridge and an online thrust correction mechanism that align the simulated latent space with reality using mere seconds of flight data. Real-world validations on a Crazyflie micro-quadrotor demonstrate that our adaptive controller significantly outperforms baselines, maintaining precise trajectory tracking under severe uncertainties including mass variations, asymmetric payloads, and dynamic slung loads
arXiv:2507.09148v2 Announce Type: replace-cross Abstract: Sparse Principal Component Analysis (SPCA) is a fundamental technique for dimensionality reduction, and is NP-hard. In this paper, we introduce a randomized approximation algorithm for SPCA, which is based on the basic SDP relaxation. Our algorithm takes an (approximate) SDP solution, constructs one deterministic sparse solution and several randomized solutions, and outputs the best among them. Our algorithm has an approximation ratio of at most the sparsity constant with high probability, if called enough times. Under a technical assumption, which is consistently satisfied in our numerical tests, the average approximation ratio is also bounded by $\mathcal{O}(\log{d})$, where $d$ is the number of features. We show that this technical assumption is satisfied if the SDP solution is low-rank, or has exponentially decaying eigenvalues. We then present two classes of instances for which this technical assumption holds. We also demonstrate that in a covariance model, which generalizes the spiked Wishart model, the deterministic solution in our algorithm achieves a near-optimal approximation ratio. We demonstrate the efficacy of our algorithm through numerical tests on real-world datasets.
arXiv:2605.17378v1 Announce Type: cross Abstract: We introduce UPSim (UxNB Propagation Simulator), a ray tracing-calibrated, semi-deterministic solution for spatially consistent FR3 air-to-ground propagation modeling in uncrewed aerial vehicle (UAV) networks. Instead of launching rays for every receiver position, UPSim derives deterministic visibility regions from 3D building geometry via shadow projection. It then augments these regions with line-of-sight (LOS) state-specific and altitude-aware path loss, correlated large-scale fading, and small-scale fading. Calibration and validation against FR3 ray tracing data using the global 3D-GloBFP building dataset demonstrate that UPSim accurately reproduces empirical channel distributions. Furthermore, the resulting maps support route-based analysis of channel evolution over complex urban layouts, exposing critical trajectory-level statistics such as outage distances. Consequently, UPSim offers a highly scalable, practical middle ground between computationally expensive full ray tracing and purely stochastic channel generation for mobility-aware planning and radio-map construction in aerial access scenarios.
arXiv:2411.15294v2 Announce Type: replace-cross Abstract: For decades it is known that Quantum Computers might serve as a tool to solve a very specific kind of problems that have long thought to be incalculable. Some of those problems are of a combinatorial nature, with the quantum advantage arising from the exploding size of a huge decision tree. Although this is of high interest as well, there are more opportunities to make use of the quantum advantage among non-perfect information games with a limited amount of steps within the game. Even though it is not possible to answer the question for the winning move in a specific situation, people are rather interested in what choice gives the best outcome in the long run. This leads us to the search for the highest number of paths within the game's decision tree despite the lack of information and, thus, to a maximum of the payoff-function. We want to illustrate on how Quantum Computers can play a significant role in solving these kind of games, using an example of the most popular German card game Skat. Therefore we use quantum registers to encode the game's information properly and construct the corresponding quantum gates in order to model the game progress and obey the rules. Finally, we use a score operator to project the quantum state onto the winning subspace and therefore evaluate the winning probability for each alternative decision by the player to be made by using quantum algorithms, such as quantum counting of the winning paths to gain a possible advantage in computation speed over classical approaches. Thus, we get a reasonable recommendation of how to act at the table due to the payoff-function maximization. This approach is clearly not doable on a classical computer due to the huge tree-search problem and we discuss peculiarities of the problem that may lead to a quantum advantage when exceeding a certain problem size.
arXiv:2605.18625v1 Announce Type: cross Abstract: We study the near-kernel sector of the Hamiltonian constraint operator in the one-vertex model of quantum reduced loop gravity using variational Monte Carlo methods with neural quantum states. The analysis is based on the symmetric Hamiltonian containing both Euclidean and Lorentzian contributions, and on the variational minimization of the positive quadratic operator $\hat{\mathcal Q}=\hat C \hat C^\dagger$ in truncated Hilbert spaces with spin cutoff up to $j_{\mathrm{max}}=1001$. The resulting near-kernel states are found to organize into three qualitatively distinct classes. At low cutoffs, we find solutions that do not factorize across the three edge degrees of freedom. At larger cutoffs, we find two different factorized branches, both described to very high accuracy by products of one-edge wavefunctions but localized in different spin regimes. One of these branches is matched with near-unit fidelity by reduced Thiemann coherent states, providing evidence for an emergent semiclassical organization of the near-kernel sector. The other is likewise strongly factorized, but its one-edge factors are not well described by the same coherent-state family.
arXiv:2605.18054v1 Announce Type: cross Abstract: Volumetric media promises next-generation content delivery applications, but its bandwidth demand remains a key bottleneck. Implicit and hybrid volumetric representations reduce model sizes, yet still require careful coding to reach 2D video-like bitrates. We present CATRF, a standard-codec-in-the-loop compression framework for plane-factorized radiance fields. During training, we quantize and pack 2D feature planes into codec-friendly canvases, run a standard codec roundtrip (JPEG/VP9/HEVC/AV1), then unpack and dequantize the decoded features before volume rendering. We use a straight-through estimator (STE) to insert the non-differentiable, standard codec pipeline into the training loop, allowing radiance-field features to adapt directly to the real, client-side codec distortions without introducing any learned codec parameters. On both static and dynamic benchmarks, CATRF consistently achieves a better rate-distortion trade-off over codec-agnostic and learned-codec-in-the-loop baselines, and also outperforms recent compressed 3DGS methods in both compression efficiency and decoding speed. These results highlight a practical path toward low-bitrate, compression-resilient volumetric representations for free-viewpoint video streaming.
arXiv:2605.18071v1 Announce Type: new Abstract: Supporting long-context LLMs is challenging due to the substantial memory demands of the key-value (KV) cache. Existing offloading systems store the full cache in host memory and selectively fetch critical entries during decoding, but this strategy quickly hits a ceiling: sparsity cannot be pushed further without degrading accuracy. As a result, when context length and batch size grow, the volume of KV transfers rises sharply and becomes the dominant source of decoding latency. We present KVDrive, a holistic multi-tier KV cache management system spanning GPU memory, host DRAM, and SSD. Unlike prior work that pursues greater sparsity through algorithmic refinements, KVDrive tackles the problem from a systems perspective - jointly orchestrating cache placement, pipeline scheduling, and cross-tier coordination to sustain high-throughput inference under tight GPU budgets. KVDrive advances three fundamental capabilities: it adapts cache management to attention behavior to maximize reuse and minimize redundant data movement; it restructures the decoding pipeline to overlap I/O- and CPU/GPU compute-bound stages, eliminating stalls across heterogeneous resources; and it harmonizes data movement across memory tiers to unlock scalable long-context inference far beyond GPU and DRAM limits. We have implemented a fully functional prototype of KVDrive and evaluated it on long-context benchmarks with popular LLMs. The system achieves up to 1.74x higher throughput compared to state-of-the-art works while preserving accuracy.
arXiv:2602.21529v3 Announce Type: replace Abstract: Rug pull is a critical attack in the world of blockchain technology. Despite this, the absence of sufficient time-bound and well-structured datasets is considered one of the significant issues faced while identifying early detection. Existing datasets do not provide the solution to this challenge because of temporal leakage or use of post-collapse indicators, insufficient modality coverage, and confusing or partial labels, especially with regards to DeFi tokens. To solve these problems, we present a highly curated and strictly time-bound dataset called TM-RugPull containing 1,000 projects, which include DeFi, meme, NFT, and celebrity token projects. We achieve temporal validation of the dataset by acquiring all three modalities, namely on-chain behavior, smart contract metadata, and OSINT signals. The project labels are provided based on manual investigation for the entire project's lifespan and its collapse. Also, we make our dataset publicly available together with its codebase for data acquisition and feature extraction.
arXiv:2605.17775v1 Announce Type: new Abstract: Large language models (LLMs) can generate or synthesize clinical text for a wide range of applications, from improving clinical documentation to augmenting clinical text analytics. Yet evaluations typically focus on a narrow aspect -- such as similarity or utility comparisons -- even though these aspects are complementary and best viewed in parallel. In this study, we aim to conduct a systematic evaluation of LLM-generated clinical text, which includes intrinsic, extrinsic, and factuality evaluations of synthetic clinical notes rephrased from MIMIC databases at million-note scale. Our analysis demonstrates that synthetic notes preserve core clinical information and predictive utility for coarse-grained tasks despite substantial linguistic changes, but lose fine-grained details for task like ICD coding. We show this loss of detail can be substantially mitigated by rephrasing notes by chunks rather than by the whole note, but at the cost of reduced factual precision under incomplete context. Through fact-checking and error analysis, we further find that synthesis errors are dominated by misinterpretation of clinical context, alongside temporal confusion, measurement errors, and fabricated claims. Finally, we show that the synthetic notes -- despite their task-agnostic nature -- can effectively augment task-specific training for rare ICD codes.
arXiv:2604.12254v2 Announce Type: replace Abstract: SpanKey is a lightweight way to gate inference without encrypting weights or chasing leaderboard accuracy on gated inference. The idea is to condition activations on secret keys. A basis matrix $B$ defines a low-dimensional key subspace $Span(B)$; during training we sample coefficients $\alpha$ and form keys $k=\alpha^\top B$, then inject them into intermediate activations with additive or multiplicative maps and strength $\gamma$. Valid keys lie in $Span(B)$; invalid keys are sampled outside that subspace. We make three points. (i) Mechanism: subspace key injection and a multi-layer design space. (ii) Failure mode: key absorption, together with two analytical results (a Beta-energy split and margin-tail diagnostics), explains weak baseline separation in energy and margin terms -- these are not a security theorem. iii) Deny losses and experiments: Modes A--C and extensions, with CIFAR-10 ResNet-18 runs and MNIST ablations for Mode B. We summarize setup and first-order analysis, injectors, absorption, deny losses and ablations, a threat discussion that does not promise cryptography, and closing remarks on scale. Code: \texttt{https://github.com/mindmemory-ai/dksc}
arXiv:2605.08925v2 Announce Type: replace Abstract: Interactive segmentation allows efficient label generation by leveraging user-provided clicks to progressively refine predictions, which is critical when fully supervised labels are costly or generalization to unseen classes is needed. Existing 3D interactive methods are limited: most operate sequentially, predicting only one object per iteration with binary masks, while several recent approaches depend on 2D foundation models and camera alignment to bridge the 2D-3D gap. To address these limitations, we propose a novel interactive segmentation framework that operates directly on sparse, randomly downsampled 3D points and processes multiple object clicks in a single forward pass. Our framework consists of a point Transformer-based encoder and a hierarchical mask decoder, which integrates multi-level crop-and-merge operations conditioned on learnable semantic embeddings. Unlike prior interactive approaches that require repeated model updates after each manually corrective click, our method jointly reasons over all click queries, modeling inter-instance relationships and refining both spatial masks and semantic predictions through spatial and semantic embeddings. Extensive experiments demonstrate that our model improves the mIoU metric by over 20 percent compared to strong baselines and achieves 8-10 percent gains under cross-dataset evaluation for a one-click per instance setting, often requiring only a single click per object. Our approach provides a generalizable and efficient solution for interactive 3D instance segmentation, particularly suitable for real-time applications such as robotic manipulation, navigation, and rapid 3D semantic annotation.
arXiv:2310.20504v4 Announce Type: replace Abstract: Communication and computation are traditionally treated as separate entities, allowing for individual optimizations. However, many applications focus on local information's functionality rather than the information itself. For such cases, harnessing interference for computation in a multiple access channel through digital over-the-air computation can notably increase the computation, as established by the ChannelComp method. However, the coding scheme originally proposed in ChannelComp may suffer from high computational complexity because it is general and is not optimized for specific modulation categories. Therefore, this study considers a specific category of digital modulations for over-the-air computations, QAM and PAM, for which we introduce a novel coding scheme called SumComp. Furthermore, we derive an MSE analysis for SumComp coding in the computation of the arithmetic mean function and establish an upper bound on the MAE for a set of nomographic functions. Simulation results affirm the superior performance of SumComp coding compared to traditional analog over-the-air computation and the original coding in ChannelComp approaches regarding both MSE and MAE over a noisy multiple access channel. Specifically, SumComp coding shows approximately $10$ dB improvements for computing arithmetic and geometric mean on the normalized MSE for low noise scenarios.
arXiv:2501.17549v2 Announce Type: replace Abstract: Graph-structured data plays a vital role in numerous domains, such as social networks, citation networks, commonsense reasoning graphs and knowledge graphs. While graph neural networks have been employed for graph processing, recent advancements have explored integrating large language models for graph-based tasks. In this paper, we propose a novel approach named Learnable Graph Pooling Token (LGPT), which addresses the limitations of the scalability issues in node-level projection and information loss in graph-level projection. LGPT enables flexible and efficient graph representation by introducing learnable parameters that act as tokens in large language models, balancing fine-grained and global graph information. Additionally, we investigate an Early Query Fusion technique, which fuses query context before constructing the graph representation, leading to more effective graph embeddings. Our method achieves a 4.13\% performance improvement on the GraphQA benchmark without training the large language model, demonstrating significant gains in handling complex textual-attributed graph data.
arXiv:2605.18074v1 Announce Type: new Abstract: We present 4DLidarOpen, a large-scale open multi-modal dataset for autonomous driving, centered on 4D frequency-modulated continuous-wave (FMCW) Lidar sensing. Unlike conventional time-of-flight Lidar datasets that mainly provide geometric measurements, 4DLidarOpen includes point-wise radial velocity measurements from a forward-facing 4D FMCW Lidar, together with multiple Lidars of different types, including rotating, solid-state, and blind-spot variants, surround-view cameras, and 6-DOF ego-vehicle poses. The dataset was collected in complex urban environments in Beijing and covers dense pedestrian interactions, congested traffic, high-speed driving, and unprotected maneuvers. 4DLidarOpen provides synchronized multi-sensor data and 3D bounding-box annotations with persistent track IDs across five object categories. A hybrid annotation strategy is adopted, where large-scale auto-labeled data support scalable training and human experts refine annotations for the human-annotated training and validation sets. Based on this dataset, we establish benchmarks for 3D object detection, birds-eye view (BEV) segmentation and flow prediction, and motion forecasting with planning. Extensive experiments show that direct velocity measurements from 4D FMCW Lidar provide complementary motion cues for dynamic-scene understanding. Compared with geometric-only sensing, the velocity-aware representation improves motion-related perception and downstream forecasting and planning, especially in scenarios involving vulnerable road users and fast-moving objects. These results indicate that 4D FMCW Lidar is a promising sensing modality for motion-aware autonomous driving. The dataset and evaluation toolkit are publicly released to support research on 4D scene understanding, multi-Lidar fusion, and velocity-aware perception and planning.