arXiv:2605.15656v1 Announce Type: cross
Abstract: Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.''
To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5\% average accuracy under AWGN and 87.4\% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.
Science Journals
arXiv:2605.16161v1 Announce Type: new
Abstract: This paper presents a novel architecture utilizing a 10T SRAM cell for XNOR-based in-memory computing, aimed at mitigating the extensive routing challenges typically encountered in conventional in-memory computing systems. By integrating a full adder between in-memory multiplication cells, the proposed design achieves a 50% reduction in routing complexity. The architecture performs multiply-accumulate (MAC) operations using XNOR computation optimized for binary neural networks (BNNs). Additionally, a 14T-based full adder is employed to construct an N-bit ripple carry adder in the adder tree, significantly reducing the area compared to traditional 28T-based CMOS designs. The 10T SRAM XNOR computation further enhances the latency for MAC operations. The proposed approach reduces the latency and area overhead, improving the overall hardware's area efficiency by 2.67x compared to the state-of-the-art.
arXiv:2605.15835v1 Announce Type: new
Abstract: Automated plankton image recognition is increasingly used in aquatic ecosystem monitoring, but deployed classifiers inevitably encounter unseen taxa and non-target particles. Open-set recognition methods are usually evaluated with sample-level metrics such as AUROC, AUPR, and FPR@95% unknown-recall operating points, whereas ecological monitoring depends on community-level estimates of taxon abundance and diversity. This study examines the mismatch between these objectives using controlled pseudo-communities and three datasets spanning marine zooplankton imaged by ZooScan, marine phytoplankton imaged by IFCB, and freshwater plankton imaged by an in-situ camera. We define Open-Set Community Distortion (OSCD), a Bray-Curtis-style error over known taxa plus an unknown bin, with directional components distinguishing known-taxon overestimation from underestimation. Closed-set classifiers achieved high known-class accuracy, but unknown samples were often absorbed with high confidence and in structured ways. Sample-level OOD metrics were not sufficient to select ecological operating points: for MSP, FPR@95% unknown-recall thresholds produced large test-community OSCD on all three datasets mainly because true known taxa were over-rejected into the unknown bin. Community-aware threshold calibration reduced MSP OSCD relative to fixed 95% known recall on SYKE-ZooScan 2024 and SYKE-IFCB 2022; on ZooLake the fixed-recall baseline was already close to the community-aware threshold, and the best community-level method was a prototype-distance variant rather than MSP. The benefit of community-aware calibration therefore depends on validation-community representativeness and the gap between fixed recall and the community optimum. These results show that open-set plankton recognition should be evaluated as an ecological measurement problem, not only as a sample-level detection task.
arXiv:2605.15875v1 Announce Type: new
Abstract: Affine Body Dynamics (ABD) within the Incremental Potential Contact (IPC) framework provides accurate simulation of extremely stiff solids exhibiting near-rigid behavior, with strict non-penetration guarantees. However, IPC's globally coupled barrier constraints hinder scalable execution across multiple GPUs and compute nodes. We propose a distributed formulation of ABD using a consensus-based ADMM scheme. Each compute node solves its local ABD subproblem in parallel, followed by a global consensus step that enforces consistency among shared boundary bodies. The proposed method preserves IPC-level robustness and global consistency under distributed execution. Experiments demonstrate stable convergence, non-penetration, and efficient scaling on large-scale scenes across multiple nodes.
arXiv:2605.15503v1 Announce Type: new
Abstract: Microarchitectural attacks continue to evolve, uncovering new exploitation vectors in modern processors. From a defensive perspective, assessing a system's susceptibility to such attacks remains challenging. Developing functional attack implementations is labor-intensive, requires deep microarchitectural expertise, and is highly sensitive to execution environments. Consequently, existing attacks often lack portability, limiting systematic and scalable vulnerability assessment. Recent advances in large language models (LLMs) suggest a potential avenue for lowering these barriers. However, it remains unclear whether LLMs can reliably generate functionally correct microarchitectural attack code suitable for rigorous vulnerability testing.
In this work, we present uGen, the first LLM-driven framework for automated microarchitectural attack code generation. A key challenge we address is identifying attack-specific knowledge gaps in LLMs. Through a systematic study of state-of-the-art models (GPT, Claude, and Qwen3), we find that LLMs frequently misgenerate or misplace critical attack primitives. Guided by this analysis, uGen employs a retrieval-augmented, multi-agent design that injects missing domain knowledge to synthesize functionally correct microarchitectural attack PoCs tailored to defender requirements. We evaluate uGen on cache-based and speculative-execution attacks across diverse set of microarchitectures, vulnerable functions, and LLM platforms. In the deployment stage, uGen achieves up to 100% success rate for Spectre-v1 (Claude Sonnet-4) and 80% for Prime+Probe (Qwen3-Coder). Finally, we demonstrate that uGen can generate a successful PoC code with a cost of $1.25 in under four minutes.
arXiv:2605.15874v1 Announce Type: new
Abstract: Industrial Water Treatment Systems (IWTS) are safety critical cyber-physical infrastructures and due to increased connectivity, these systems are exposed to cyber threats that can manipulate process behaviour without creating obvious devices outliers. In particular, logic-layer deception anomalies can preserve numerically plausible measurements while breaking expected cause-and-effect relationships in the control process. These attacks are difficult to detect using threshold-based monitoring or require heavy server-oriented anomaly detection models. This paper explores the potential of Tiny Deep Learning (TinyDL) to provide lightweight on-device logic-level anomaly detection for resource constrained Programmable Logic Controllers (PLCs). We propose a novel framework, TinyDL-based incremental LSTM (Ti-iLSTM) which optimises the memory and space foot print of Long Short-Term Memory (LSTM), to detect logic-layer inconsistencies in Programmable Logic Controller (PLC) based Industrial Water Treatment Systems (IWTS). Experiments on the publicly available SWaT dataset show that the optimised model achieves high detection performance (F1-score=0.983 and ROC-AUC=0.998). A deployment-style validation on the WADI dataset confirms that the proposed light-weight framework remains applicable beyond a single dataset. The research demonstrates that combining logic-aware supervision with Tiny Deep Learning (TinyDL) sequence learning creates an efficient and accurate anomaly detection suitable for resource constrained Programmable Logic Controllers (PLCs) in industrial environments.
arXiv:2605.15871v1 Announce Type: new
Abstract: Toward recursive self-improvement, we investigate LLM agents autonomously designing foundation models beyond standard Transformers. We introduce a dual-framework approach: AIRA-Compose for high-level architecture search, and AIRA-Design for low-level mechanistic implementation. AIRA-Compose uses 11 agents to explore fundamental computational primitives under a 24-hour budget. Agents evaluate million-parameter candidates, extrapolating top designs to 350M, 1B, and 3B scales. This yields 14 architectures across two families: AIRAformers (Transformer-based) and AIRAhybrids (Transformer-Mamba). Pre-trained at 1B scale, these consistently outperform Llama 3.2 and Composer-found baselines. On downstream tasks, AIRAformer-D and AIRAhybrid-D improve accuracy by 2.4% and 3.8% over Llama 3.2. Furthermore, AIRA-Compose finds models with highly efficient scaling frontiers: AIRAformer-C scales 54% and 71% faster than Llama 3.2 and Composer's best Transformer, while AIRAhybrid-C outscales Nemotron-2 by 23% and Composer's best hybrid by 37%. AIRA-Design tasks 20 agents with writing novel attention mechanisms for long-range dependencies and high-performing training scripts. On the Long Range Arena benchmark, agent-designed architectures reach within 2.3% and 2.6% of human state-of-the-art on document matching and text classification. On the Autoresearch benchmark, Greedy Opus 4.5 achieves 0.968 validation bits-per-byte under a fixed time budget, surpassing the published minimum. Together, these frameworks show AI agents can autonomously discover architectures and algorithmic optimizations matching or surpassing hand-designed baselines. This establishes a powerful paradigm for discovering next-generation foundation models, marking a clear step toward recursive self-improvement.
arXiv:2605.15840v1 Announce Type: new
Abstract: We investigate the fluorescence and relaxation dynamics of Cs atoms embedded in a cryogenic argon matrix using spectroscopy measurements combined with diatomic-in-molecule (DIM) simulations. The data reveal complex emission spectra, large Stokes shifts, and slow relaxation effects, indicating strong host-guest interactions and substantial lattice reorganization. Although the spectra are superimposed on a broad background, possibly due to low-symmetry, defect-related, or grain-boundary trapping sites, the main spectral structure is consistent with two dominant trapping environments that give rise to two triplet absorption features with distinct fluorescence behavior of the doublet and singlet components. Polarization measurements further suggest that these sites may differ in symmetry, although a unique structural assignment remains difficult
arXiv:2605.16079v1 Announce Type: new
Abstract: Large Vision-Language Models (LVLMs) have shown significant progress in video understanding, yet they face substantial challenges in tasks requiring precise spatiotemporal localization at the instance level. Existing methods primarily rely on text prompts for human-model interaction, but these prompts struggle to provide precise spatial and temporal references, resulting in poor user experience. Furthermore, current approaches typically decouple visual perception from language reasoning, centering reasoning around language rather than visual content, which limits the model's ability to proactively perceive fine-grained visual evidence. To address these challenges, we propose VideoSeeker, a novel paradigm for instance-level video understanding through visual prompts. VideoSeeker seamlessly integrates agentic reasoning with instance-level video understanding tasks, enabling the model to proactively perceive and retrieve relevant video segments on demand. We construct a four-stage fully automated data synthesis pipeline to efficiently generate large-scale, high-quality instance-level video data. We internalize tool-calling and proactive perception capabilities into the model via cold-start supervision and RL training, building a powerful video understanding model. Experiments demonstrate that our model achieves an average improvement of +13.7% over baselines on instance-level video understanding tasks, surpassing powerful closed-source models such as GPT-4o and Gemini-2.5-Pro, while also showing effective transferability on general video understanding benchmarks. The relevant datasets and code will be released publicly.
arXiv:2605.15827v1 Announce Type: new
Abstract: Caesar is a deductive verifier for probabilistic programs. At its core lies HeyVL, a quantitative intermediate verification language based on the real-valued logic HeyLo. HeyVL allows users to express a probabilistic program, its specifications, and proof rules in a programming-language style, so that new proof rules can be easily integrated into the verifier. Caesar translates HeyVL programs into verification conditions, which are then checked using the Z3 SMT solver. It also includes a backend based on probabilistic model checking for a subset of HeyVL. We report on the results of five years of development of Caesar, highlighting its main features and architecture. In particular, we describe recent improvements such as additional proof rules, a model-checking backend, and better diagnostics.
arXiv:2605.16112v1 Announce Type: new
Abstract: Transformer-based architectures have become the dominant paradigm for Continuous-Time Dynamic Graph (CTDG) learning, yet their performance remains limited on temporally shifted datasets. In this work, we identify attention dispersion as a shared failure mode of dynamic graph Transformers under temporal distribution shift. Through controlled ablation contrasting structurally and temporally distinguished historical neighbors against random ones, we show that prediction depends on a class of critical nodes that carry consistently more predictive signal than arbitrary neighbors. However, existing Transformers fail to focus on these nodes even when they are present in the input, as temporal shift weakens attention contrast and produces overly dispersed attention distributions. This diagnosis suggests a simple and transferable fix: replace standard attention with differential attention, which suppresses common-mode attention and amplifies distinctive token-level signals. When added to three representative CTDG Transformer baselines, differential attention consistently improves performance, with gains concentrated on high-shift datasets. Attention-level measurements further confirm the mechanism, showing reduced attention entropy and increased attention mass on critical nodes. Building on these findings, we introduce DiffDyG, a reference implementation combining differential attention with standard input encodings. Across 9 benchmarks and three negative sampling protocols, DiffDyG achieves SOTA performance, with especially large gains on the most shifted datasets.
arXiv:2605.15579v1 Announce Type: cross
Abstract: To fit diverse display and bandwidth constraints, high-frame-rate videos are temporally downscaled to low-frame-rate (LFR) and later upscaled, requiring joint optimization for effective frame-rate rescaling. However, existing methods typically link the two operations via training objectives, without fully exploiting their reciprocal nature, which may cause high-frequency information loss. Moreover, they overlook the impact of lossy codecs on LFR videos, limiting real-world applicability. In this work, we propose an end-to-end framework for compression-aware frame-rate rescaling, named TVRN. To regularize high-frequency information lost during frame-rate downscaling, TVRN adopts an invertible architecture that combines a Multi-Input Multi-Output Temporal Wavelet Transform with a high-frequency reconstruction module. To enable end-to-end training through non-differentiable lossy codecs, we design a surrogate network that approximates their gradients. Finally, to improve robustness under various compression levels, we extend TVRN to an asymmetric architecture by incorporating compression-aware features learned via a learning-to-rank strategy. Extensive experiments show that TVRN outperforms existing methods in reconstruction quality under industrial video compression settings. Source code is publicly available at https://github.com/fengxinmin/TVRN_public.
arXiv:2605.16094v1 Announce Type: new
Abstract: Wideband channel estimation (CE) in high-mobility scenarios remains challenging because channel responses vary rapidly, while practical systems can allocate only sparse pilots to accommodate dense users. Fortunately, many high-mobility environments, such as high-speed railways, exhibit scheduled trajectories, predictable velocities, and a limited number of dominant propagation paths. These properties induce a delay--beam power spectrum that is more stable than the instantaneous complex channel frequency response (CFR), less sensitive to the random phase coherence, and rich in geometric information. To exploit such environmental properties, we propose GeoGS-CE, a two-stage channel estimation framework for sparse-pilot high-mobility scenarios. In the offline stage, GeoGS-CE jointly models: 1) a scene-level 3D Gaussian representation that captures the non-line-of-sight (NLoS) geometric scattering support, and 2) a leakage-aware differentiable wireless rendering process that maps the NLoS Gaussians, together with an explicit virtual line-of-sight (LoS) component, to the measured delay--beam power spectrum, while accounting for practical OFDM delay and array leakage effects. In the online stage, the delay--beam power spectrum is predicted for each user location and used as a strong covariance prior, enabling accurate full-band and full-array CFR reconstruction and tracking through a linear MMSE estimator. Simulations based on channels generated from a segment of the Guangshen high-speed railway show that the proposed geometric prior substantially improves CFR reconstruction over pilot-only and non-geometric baselines.
arXiv:2605.16102v1 Announce Type: new
Abstract: Fractional boundary value problems are often used to model complex systems and processes characterized by memory effects and anomalous diffusion. In this paper, we consider fractional boundary value problems involving the Riesz-Caputo operator, which is particularly suited for modeling physical phenomena exhibiting symmetric diffusive effects. We provide an integral representation of the solution to prove existence and uniqueness of the fractional differential problem. We introduce a B-spline collocation method to approximate the solution of the problem and provide a convergence analysis, with both theoretical insights and numerical experiments.
arXiv:2605.15831v1 Announce Type: new
Abstract: Autoregressive music generation depends strongly on the audio tokenizer. Existing high-fidelity codecs often use residual multi-codebook quantization, which preserves reconstruction quality but complicates language modeling after sequence flattening, as the residual hierarchy imposes strong sequential dependencies and can amplify error accumulation. We propose BandTok, a generation-oriented 2D Mel-spectrogram tokenizer that represents each frame with Mel-frequency band tokens from a single shared codebook. This design yields a physically interpretable time-frequency token grid with a more independent token structure, making it better suited for autoregressive modeling. BandTok improves reconstruction with a multi-scale PatchGAN objective and EMA codebook updates. We further introduce an autoregressive language model with 2D Rotary Position Embedding (2D RoPE) to preserve temporal and frequency-band structure during generation. Experiments show that BandTok improves over residual-codebook tokenizers and achieves strong results in a data-limited setting. The source code and generation demos for this work are publicly available.
arXiv:2605.16159v1 Announce Type: new
Abstract: Real-time event detection in IoT mesh sensor networks must balance sensitivity against false-positive load on a constrained mesh radio. We present a Monte Carlo comparison of the Temporal Spectral Noise-Floor Adaptation (TSNFA) detector against four classical comparators drawn from the radar Constant False Alarm Rate (CFAR) family and from sequential change detection: the Lipski FFT energy detector, Cell-Averaging CFAR (CA-CFAR), Ordered-Statistic CFAR (OS-CFAR), and state-machine Cumulative Sum (CUSUM). All five detectors are implemented to fit a Cortex-M0+ class envelope, process a 1-D 100 Hz time series in 128-sample frames, and use temporal reference windows in place of the spatial reference cells of conventional radar CFAR. Across a factorial set of four configurations (10 and 50 nodes; 12 dB and 18 dB SNR), each replicated five times over 24 hours, TSNFA achieves 99.97 to 100% event detection rate with 100% event precision and zero false-positive clusters per node. The classical comparators each succeed on one quality dimension and fail on another. Lipski FFT (k = 3), CA-CFAR, and OS-CFAR all maintain near-perfect detection rate but with event precision below 3% and per-node bandwidth between 145 kB/h and 1.2 MB/h. CA-CFAR and OS-CFAR are indistinguishable in false-alarm performance, both saturating the same broadband-statistic failure mode. CUSUM shows an SNR-dependent detection-rate drop from about 70% at 18 dB to 51% at 12 dB. TSNFA is the only algorithm tested that simultaneously achieves high detection rate, high precision, and low per-node bandwidth.
arXiv:2605.16158v1 Announce Type: new
Abstract: Standard Gaussian splatting methods rely on heuristic densification and pruning to adaptively allocate primitives during training, and the resulting Gaussian count strongly influences both reconstruction quality and runtime. This makes comparisons across methods fragile: improvements can stem from higher representational capacity rather than algorithmic design. A common and naive workaround for this is hard-stopping or budgeting densification/pruning once a target count is reached, which biases training because different methods hit the cap at different times, yielding non-uniform densify/prune exposure across views and uneven point distributions. We propose a target point control scheme that preserves the standard densification window and cadence, but adjusts only the existing densification and opacity-culling hyper-parameters to track a quadratic target count trajectory. This quota-governor reaches the desired count by 15k iterations without abrupt cutoffs, ensuring that all methods and views receive equal densification and pruning cycles, enabling fairer, capacity-matched evaluation.
arXiv:2605.16154v1 Announce Type: new
Abstract: Reinforcement learning (RL) allows vision-language-action (VLA) policies to generalize beyond their training distribution by optimizing directly for task success, but post-training is computationally expensive. A natural response has been to speed rollout collection through faster simulators and world models. In GRPO-based VLA RL, we find that the dominant cost lies elsewhere: gradient computation accounts for approximately 78% of wall-clock time per step in our runs, while rollout collection accounts for only 21%. Gradient cost dominates because much of this computation is spent on phases that contribute little to learning. GRPO's learning signal is driven by advantage variance: only phases where successful and failed rollouts diverge produce learning signal. However, GRPO assigns the same advantage to every chunk in a rollout. As a result, actor-update compute is spent uniformly across the trajectory, including phases the policy already handles after pre-training and supervised fine-tuning. This paper presents Probabilistic Chunk Masking (PCM), a drop-in modification to GRPO that allocates gradient computation to a small, probabilistically selected subset of chunks per trajectory. PCM scores semantic phases using success-failure action variance, a rollout-derived proxy for per-phase gradient variance, and samples a fixed chunk budget with online-updated phase-level keep probabilities. We formalize per-phase gradient variance as the quantity determines where gradient computation is useful and show that success-failure action variance provides a measurable proxy for it. PCM requires no reward model or learned critic. On three LIBERO benchmarks, PCM matches the final success rate of standard GRPO while achieving 2.38 times wall-clock speedup, 4.8 times faster gradient updates, and 60% lower peak activation memory, while backpropagating through fewer than 20% of trajectory chunks.
arXiv:2605.16065v1 Announce Type: new
Abstract: 3D Gaussian Splatting (3D-GS) enables real-time 3D scene reconstruction but lacks robust segmentation for editing tasks such as object removal, extraction, and recoloring. Existing approaches that lift 2D segmentations to the 3D domain suffer from view inconsistencies and coarse masks. In this paper, we propose a novel framework that leverages the Segment Anything Model High Quality (SAM-HQ) to generate accurate 2D masks, addressing the limitations of the standard SAM in boundary fidelity and fine-structure preservation. To achieve robust 3D segmentation of any target object in a given scene, we introduce a prior-guided label reassignment method that assigns labels to 3D Gaussians by enforcing multiview consistency with learned priors. Our approach achieves state-of-the-art segmentation accuracy and enables interactive, real-time object editing while maintaining high visual fidelity. Qualitative results demonstrate superior boundary preservation and practical utility in Virtual Reality (VR) and robotics, advancing 3D scene editing.
arXiv:2605.16067v1 Announce Type: new
Abstract: We propose a variational quantum classifier operating on high dimensional deep representations via amplitude encoding, stabilized by a learnable classical pre encoding layer.By combining normalized amplitude embeddings with bounded quantum observables, the resulting model induces a structured and smooth hypothesis class with controlled sensitivity to input variations. Model reliability is assessed using SAFE-AI metrics derived from the Cramer von Mises divergence, enabling consistent evaluation across accuracy, robustness, and explainability dimensions. Empirical results show that the proposed quantum model provides competitive predictive performance compared with strong classical baselines while exhibiting a more balanced SAFE reliability profile, with improved robustness to noise and stability under structured feature removal. These findings suggest that variational quantum circuits offer a principled mechanism for stability oriented SAFE learning in safety critical settings.
arXiv:2605.16149v1 Announce Type: new
Abstract: Space plasmas are generally characterized by non-Maxwellian distributions with suprathermal populations, as routinely revealed by in situ observations. Such departures from standard Maxwellian distributions can be understood as signatures of quasiequilibrium states, in which the distribution of the medium can be expressed as a continuous superposition of Maxwellian distributions, namely through superstatistics. Here, we construct macroscopic relations linking fluxes to their associated driving forces in such plasmas, where superstatistical effects enter the picture through the transport coefficients. After comparing the resulting superstatistical distributions with observed electron distributions in the solar wind, we turn to the kinetic response of quasiequilibrium plasmas and derive the corresponding transport coefficients, including the electric and thermal conductivities, the mobility, and the diffusion coefficient. We further extend the analysis to viscous plasmas and compute the shear and bulk viscosity coefficients. Overall, quasiequilibrium effects are found to systematically enhance the transport coefficients relative to their Maxwellian values. We quantify this enhancement for the three main universality classes of superstatistics, which are the most commonly encountered in experimental and observational situations, and interpret it as a consequence of the increased population of energetic particles in the non-Maxwellian tails.
arXiv:2605.16109v1 Announce Type: new
Abstract: The increasing environmental impact of the telecom industry has heightened the need for sustainable telecommunications networks. With skyrocketing data traffic and 5G gaining a foothold, telecom operators are under pressure to sustain digital growth while meeting their environmental responsibilities. In this paper, we discuss two fundamental drivers of sustainability in the telecom sector, namely, the design of environmentally friendly networks and the implementation of circular economy (CE) principles. Energy efficiency is pursued through dynamic network sleep modes, AI-based traffic management, and the utilization of renewable energy sources in base stations and data centers. Concurrently, circular economy practices, including device second-hand sales, e-waste treatment, and equipment lifespan extension, are becoming increasingly popular to address resource demand and mitigate carbon footprint. Case histories from the world's largest operators demonstrate some of the reductions in power consumption and operational emissions, as well as the associated savings and public image benefits. Although these solutions are promising, the paper also highlights several limitations, including technology constraints, policy shortcomings, and the need for cross-sector partnerships. We conclude with research implications in the form of a sustainable perspective that integrates the green adoption of technology, circular supply chains, and the role of regulation in driving long-term environmental and economic sustainability in the telecom industry.
arXiv:2605.16031v1 Announce Type: new
Abstract: Ventilated acoustic silencers combing sound attenuation with high ventilation are pivotal for advanced noise control. However, balancing attenuation, bandwidth, openness, and thickness remains a high-dimensional challenge. Here, we report a physics-aware machine-learning-driven inverse design framework for ultra-open acoustic silencers (UAS). By leveraging Green's function-based parameterization, we physically decouple the design space into spectral and radial parameters, ensuring physical interpretability while reducing complexity. We introduce a two-stage forward prediction architecture that captures broadband envelopes and sharp resonant features via a coarse-to-fine strategy. Coupled with a population-based, hybrid-objective parallel (PHP) inverse strategy, our framework enables rapid exploration of non-convex landscapes, identifying hundreds of optimized candidates within seconds. Crucially, this framework uncovers hidden linear design rules that govern high-performance monolithic designs, acting as geometric proxies for optimal impedance-matching. We experimentally validate a family of prototypes: UAS-2 demonstrates the monolithic limit with high ventilation ratio, while UAS-3 demonstrates versatility in multi-mode interactions. To circumvent the trade-off ceiling of single-unit resonators, a parallel-composite architecture (UAS-4) is introduced to enhance performance through spatial interference distribution. Results confirm a broadband bandwidth exceeding 830 Hz achieved with an ultra-thin profile (0.1-0.2{\lambda}) and 80% ventilation. This work establishes a data-driven paradigm for discovering design principles in functional metamaterials.
arXiv:2605.16143v1 Announce Type: new
Abstract: Large language model based agents often fail in unfamiliar environments due to premature exploitation: a tendency to act on prior knowledge before acquiring sufficient environment-specific information. We identify autonomous exploration as a critical yet underexplored capability for building adaptive agents. To formalize and quantify this capability, we introduce Exploration Checkpoint Coverage, a verifiable metric that measures how broadly an agent discovers key states, objects, and affordances. Our systematic evaluation reveals that agents trained with standard task-oriented reinforcement learning consistently exhibit narrow and repetitive behaviors that impede downstream performance. To address this limitation, we develop a training strategy that interleaves task-execution rollouts and exploration rollouts, with each type of rollout optimized by its corresponding verifiable reward. Building on this training strategy, we propose the Explore-then-Act paradigm, which decouples information-gathering from task execution: agents first utilize an interaction budget to acquire grounded environmental knowledge, then leverage it for task resolution. Our results demonstrate that learning to systematically explore is imperative for building generalizable and real-world-ready agents.
arXiv:2605.16081v1 Announce Type: new
Abstract: The paradigm of learning from automatic annotations driven by pre-trained experts and Foundation Models dominates data-hungry applications. However, it introduces a critical challenge: model-induced label noise. Unlike stochastic noise in classical robust learning, this noise stems from annotator inductive biases, manifesting as systematic errors tightly coupled with local feature manifolds. Existing methods relying on global transition matrices underfit these structural patterns, while learning instance-specific matrices remains mathematically intractable. We propose Model-Induced Noise Decoupling (MIND), a theoretically grounded framework addressing this dilemma. We demonstrate that the high-dimensional noise manifold can be decoupled into tractable, subspace-dependent components via Latent Manifold Disentanglement. Specifically, our Latent Decoupling Estimator (LDE) dynamically projects samples into latent structural clusters with consistent error modes, facilitating noise identifiability without ground-truth anchor points. To rigorously evaluate robustness, we adopt a hierarchical protocol: moving from controlled noise on CIFAR-100 to a structural stress test on large-scale real-world 3D datasets (S3DIS, ScanNet), where error patterns explicitly couple with geometric manifolds. Empirically, MIND significantly outperforms state-of-the-art methods on these complex benchmarks and effectively corrects zero-shot hallucinations from Vision-Language Models (e.g., OpenSeg), highlighting its potential as a robust distillation framework for Foundation Models.