arXiv:2511.04074v2 Announce Type: replace
Abstract: Accurately modeling seismic wave attenuation is critical for ground response analyses (GRAs), which aim to replicate local site effects in ground motions. However, theoretical transfer functions (TTFs) from GRAs often overestimate empirical transfer functions (ETFs) when the small-strain damping ratio ($D_{\text{min}}$) is set equal to laboratory measurements. Prior studies addressed this by inflating $D_{\text{min}}$ in one-dimensional (1D) GRAs to account for apparent damping mechanisms such as diffraction and mode conversions that cannot be captured in 1D. Although this approach improved fundamental-mode predictions, it often overdamped higher modes. This study explores more direct modeling of apparent damping using two-dimensional (2D) GRAs at four downhole array sites: Delaney Park (DPDA), I-15 (I15DA), Treasure Island (TIDA), and Garner Valley (GVDA). At each site, three numerical damping formulations, Full Rayleigh, Maxwell, and Rayleigh Mass, were implemented using both conventional $D_{\text{min}}$ and an inflated $D_{\text{min}}$ ($m \times D_{\text{min}}$) obtained from site-specific calibration. Results show that the appropriate $D_{\text{min}}$ multiplier ($m$) correlates with the site's velocity contrast. Using inflated $D_{\text{min}}$, Full Rayleigh and Maxwell damping systematically overdamped higher modes, with Maxwell damping also shifting modal peaks. In contrast, Rayleigh Mass damping consistently achieved the closest match to ETFs at three of the four sites while offering faster computational performance. These findings demonstrate that inflated $D_{\text{min}}$ can represent unmodeled attenuation in 2D GRAs, particularly at sites with low velocity contrast, and that frequency-dependent formulations such as Rayleigh Mass damping can more accurately predict site response than traditional frequency-independent approaches.
Science Journals
arXiv:2603.03243v2 Announce Type: replace
Abstract: We present Whole-Body Mobile Manipulation Interface (HoMMI), a data collection and policy learning framework that learns whole-body mobile manipulation directly from robot-free human demonstrations. We augment UMI interfaces with egocentric sensing to capture the global context required for mobile manipulation, enabling portable, robot-free, and scalable data collection. However, naively incorporating egocentric sensing introduces a larger human-to-robot embodiment gap in both observation and action spaces, making policy transfer difficult. We explicitly bridge this gap with a cross-embodiment hand-eye policy design, including an embodiment agnostic visual representation; a relaxed head action representation; and a whole-body controller that realizes hand-eye trajectories through coordinated whole-body motion under robot-specific physical constraints. Together, these enable long-horizon mobile manipulation tasks requiring bimanual and whole-body coordination, navigation, and active perception. Results are best viewed on: https://hommi-robot.github.io
arXiv:2605.15548v1 Announce Type: new
Abstract: Traditional robotic hand metrics focus on static properties such as workspace, manipulability, and grasp stability. However, these metrics do not directly measure dexterity under the standard definition in robotic manipulation: the ability to continuously change an object's pose within the hand while maintaining contact from an initial grasp. We introduce Kinematic Rolling Manipulation Ability (KaRMA), a kinematic-only metric for fine manipulation that quantifies reachable in-hand translation and reorientation of a spherical test object within a two-finger precision pinch through feasible rolling motions. KaRMA enforces joint limits, collision constraints, rolling contact, and antipodal force feasibility, then investigates reachable in-hand object poses via breadth-first search over translation and rotation primitives. KaRMA reports three scores: translational coverage (KaRMA-T), rotational coverage (KaRMA-R), and sensitivity to the initial grasp (KaRMA-S). We evaluate KaRMA on 16 widely used robotic hands and compare against static baselines, showing that KaRMA separates hands that rank identically under static proxies, reveals translation-rotation tradeoffs invisible to existing baselines, and is qualitatively consistent with selected published task benchmarks where Jacobian-based metrics can be misleading.
arXiv:2605.15549v1 Announce Type: new
Abstract: The demand for clean energy is ever increasing, with new nuclear technologies presenting a complementary solution to renewable energies. However, designing and operating these systems is exceptionally difficult, given the complexity of the physical phenomena that interact to form the system dynamics. While high-fidelity simulations help to understand the non-linear, multi-physics interactions within a reactor, they are computationally expensive and rarely suitable for real-time applications. Furthermore, model-based approaches are inherently sensitive to simplifying assumptions required to derive their governing equations and parameters, leading to inevitable discrepancies with real-world measurements. In contrast, Machine Learning (ML) methods have the potential to generate reliable surrogate models which may be able to quickly predict the system's behaviour. However, the number of data-driven methods that can potentially be used for this task is large and diverse. In a safety-critical setting such as nuclear engineering, a fair comparison of different ML methods, and a clear understanding of their advantages and limitations, is of paramount importance. To address this, we introduce a Common Task Framework (CTF) for ML in nuclear engineering, building upon previous efforts in dynamical systems and seismology. This CTF considers a curated set of datasets from different nuclear and nuclear-adjacent systems. The CTF evaluates the performance of a method on 12 established metrics, alongside a new paradigm focused on system monitoring from sparse measurements only. We illustrate the framework by benchmarking standard ML baselines against these datasets, revealing current method limitations. Our vision is to replace ad hoc comparisons with standardized evaluations on hidden test sets, raising the bar for rigour and reproducibility in scientific ML for the nuclear industry.
arXiv:2605.15406v1 Announce Type: new
Abstract: This work presents a new approach for implementing polymorphism for bottom-up relational languages, without monomorphization. We begin by introducing semiringKanren, a bottom-up weighted relational programming language. We extend this base language to support polymorphism. We describe a new method to compile polymorphic semiringKanren programs into non-polymorphic ones, based on equality patterns and large-enough instances of polymorphic relations. We prove the correctness of this method. Finally, we consider existing work and suggest directions for future research.
arXiv:2605.15404v1 Announce Type: new
Abstract: Large language model personalization typically adapts outputs to user preferences and style but does not account for differences in user evaluation capacity across domains of expertise. This limitation can encourage Professional Domain Drift, where users rely on AI generated reasoning in domains they cannot reliably evaluate. We introduce Capability Conditioned Scaffolding, a typed framework that partitions expertise into strong, mixed, and weak domains and conditions intervention behavior on structured capability profiles. A pilot evaluation across multiple MMLU subsets and four LLM substrates shows consistent profile conditioned intervention behavior, including categorical inversion under profile swapping and selective activation in mixed domain risk zones. These findings suggest that capability aware scaffolding can support more reliable professional human AI collaboration beyond stylistic personalization.
arXiv:2605.15400v1 Announce Type: new
Abstract: While AI agents are rapidly advancing from isolated tools to interactive collaborators, data-driven human-machine teaming (HMT) methods remain costly in their reliance on human interaction data across domains, teammates, and team sizes. Zero-shot coordination (ZSC) addresses this bottleneck by simulating diverse partner populations to approximate how unseen partners might behave. However, partner coverage alone is insufficient as team settings scale and communication becomes degraded. To remedy this deficiency, we propose Influence-Based Team Steering (IBTS), a framework that uses influence shaping to incentivize agents to discover diverse, high-performing team interaction patterns and further steers ongoing trajectories toward stronger learned coordination modes. We assess IBTS on Overcooked-AI in both two-agent and three-agent settings, allowing us to test whether learned coordination structure transfers beyond dyadic interaction. Our evaluation includes simulated partners, synthetic partner-style variation, and, to our knowledge, the first 30-subject Overcooked-AI HMT study involving two real human teammates and one machine teammate. Across these evaluations, IBTS improves team performance against competing baselines, highlighting the need for scaled ZSC to combine sparse-reward coordination mechanisms with partner-variation coverage rather than relying on diversity alone.
arXiv:2605.15550v1 Announce Type: new
Abstract: In this paper, we introduce TG-DIN, a theory-guided demand inference network that infers latent user demand from observable network quality-of-service (QoS) measurements. Rather than directly predicting QoS outcomes using black-box models, TG-DIN explicitly models latent demand as an intermediate variable and links it to observable behavior through a differentiable theory layer grounded in scheduling and queuing principles. This design yields an interpretable, mechanism-consistent representation of user demand that is directly applicable to downstream tasks such as congestion diagnosis, resource allocation, capacity planning, and policy evaluation. The theory layer further enables a principled randomized training regime that exposes the model to diverse yet physically meaningful operating conditions without requiring labeled demand data. Extensive synthetic experiments show that TG-DIN generalizes robustly across capacities, demand levels, and traffic patterns, substantially outperforming purely data-driven baselines under distribution shift. Moreover, when trained exclusively on synthetic data and applied directly to real packet traces, TG-DIN accurately recovers per-user allocation structure in shared-link scenarios. Together, these results demonstrate the effectiveness of theory-guided inductive biases for achieving transferable, deployment-ready inference in dynamic network environments.
arXiv:2605.15551v1 Announce Type: new
Abstract: Training large-scale deep neural networks (DNNs) is resource-intensive, making model compression a practical necessity. The widely accepted ''learning as compression'' hypothesis posits that training induces structure in network weights, which enables compression. Measuring this structure through Kolmogorov-Chaitin-Solomonoff (KCS) complexity is appealing, but existing estimators based on the Coding Theorem Method (CTM) and the Block Decomposition Method (BDM) are limited to small binary objects and do not scale to modern DNNs. We introduce the Quantized Block Decomposition method (QuBD), which extends algorithmic complexity estimation to any $k$-ary object. QuBD first quantizes the network weights to a finite alphabet, then estimates the KCS complexity by aggregating per bit-plane CTM estimates. We show theoretically that QuBD yields a strictly tighter estimation gap with respect to true KCS complexity than binarization-based methods. Using QuBD, we study how the algorithmic complexity of neural network weights evolves during training, showing that it decreases as models learn, scales with data budget, increases during overfitting, follows the delayed generalization observed during grokking, and correlates with generalization performance. We further show that algorithmic information resides predominantly in the most significant bit-planes, which can serve as a practical diagnostic for determining appropriate post-training quantization levels. This work offers novel insights into learning mechanisms in DNNs by providing the first scalable, tractable estimates of KCS complexity for large, non-binary objects such as DNN weights.
arXiv:2605.15399v1 Announce Type: new
Abstract: Neural surrogate solvers of partial differential equations (PDEs) promise dramatic speedups over numerical methods, especially in scenarios requiring many solves. However, current accuracy-based evaluations do not fully consider two central issues: (1) neural solvers incur substantial up-front costs for data generation, training, and tuning; and (2) classical solvers can also generate low-fidelity solutions at a sufficiently low simulation cost. To explicitly account for these realities and fully incorporate end-to-end costs, we propose an evaluation framework centered on breakeven complexity, a metric that counts the forward solves before a learned solver is cost-effective relative to an error-equivalent traditional solver. To evaluate this measure, we apply scaling laws to determine how much training budget to allocate to data generation and discuss how to achieve smooth error-matching in diverse settings. We evaluate the breakeven complexity of multiple neural PDE solvers on three PDEs on 2D periodic domains from APEBench and a novel benchmark of flows past multiple obstacles generated by the GPU-native PyFR code. Among other findings, our results suggest that neural PDE solvers become more effective as problems get harder in terms of cost, dimension, rollout, physics regime (e.g. higher Reynolds number), etc.
arXiv:2605.15460v1 Announce Type: new
Abstract: Cross-modal hashing enables efficient retrieval by encoding images and text into compact binary codes. State-of-the-art methods rely on semantic similarity graphs derived from user interactions for supervision, yet these graphs encode sensitive behavioral patterns vulnerable to link reconstruction attacks. Existing privacy-preserving approaches fail on graph-structured data: Differentially Private SGD destroys relational motifs by treating samples independently, while graph synthesis methods suffer from unbounded local sensitivity in scale-free networks, hub nodes cause single-edge modifications to alter triangle counts by $\mathcal{O}(N)$, necessitating prohibitive noise injection. We term this phenomenon Hubness Explosion. We propose DMP-MH, a Sanitize-then-Distill framework that decouples privacy from representation learning. Our approach first bounds sensitivity by deterministically clipping node degrees, capping the $L_2$-sensitivity of triangle motifs independently of dataset size. A sanitized synthetic graph is then generated via Noisy Mirror Descent under $(\epsilon,\delta)$-Edge Differential Privacy. Finally, dual-stream hashing networks distill this topology using a holistic structural loss that enforces cross-modal alignment. Evaluated on MIRFlickr-25K and NUS-WIDE under a strict inductive protocol, DMP-MH outperforms private baselines by up to 11.4 mAP points while retaining up to 92.5% of non-private performance.
arXiv:2605.15927v1 Announce Type: new
Abstract: Quantum chemistry calculations are often performed using atom-centered basis sets which are chosen to balance accuracy and cost. While they are systematically improvable, the total energy converges slowly with basis set size towards the complete basis set (CBS) limit. Common extrapolation methods require several intermediate-quality calculations to afford an estimate of the CBS energy. We propose combining a pairwise interaction model with a minimal complementary auxiliary basis set (CABS) baseline to estimate the CBS energy from a single quantum chemistry calculation in a minimal basis set via Kernel-Ridge-Regression (KRR), which is more efficient than both direct and $\Delta$-machine learning. We show that KRR on standard molecular representations can be improved by approximating atom-wise local kernels using Chebyshev polynomials which allows us to train KRR models efficiently on moderate compute resources, further enabling a data-driven approach towards CBS combining physical baselines capturing leading order effects with data-efficient machine learning models.
arXiv:2605.15398v1 Announce Type: new
Abstract: Recent advances in 3D generative editing, particularly pipelines based on 3D Gaussian Splatting (3DGS), have achieved high-fidelity, multi-view-consistent scene manipulation from text prompts. However, we find that these pipelines also introduce new safety risks when unsafe prompts produce edits that are propagated and optimized across views. In this work, we study unsafe generation in 3D editing pipelines and show that such behavior can lead to coherent, undesirable Not-Safe-For-Work (NSFW) content in the final 3D representation.
To address this, we propose 3DEditSafe, a safety-regularized 3D editing framework that constrains unsafe semantic propagation during optimization. 3DEditSafe combines generation-stage safety guidance with rendered-view 3D safety regularization, safe semantic projection, residue suppression, and mask-aware preservation to steer optimization away from unsafe editing directions. We evaluate our approach on EditSplat scenes using an object-compatible unsafe prompt benchmark and show that 2D safety guidance alone is not consistently sufficient to prevent unsafe 3D edits. 3DEditSafe reduces unsafe semantic alignment and view-level attack success rates, while revealing a safety-quality tradeoff in which stronger unsafe suppression can introduce artifacts or reduce unsafe-prompt fidelity. To our knowledge, this work is the first attempt to study and defend against unsafe generation in text-driven 3D editing pipelines, highlighting the need for safety mechanisms that operate directly on optimized 3D representations.
arXiv:2605.15446v1 Announce Type: new
Abstract: The disaggregation of base stations into discrete RAN functions introduces new threats to mobile networks, as failures in one RAN function can trigger cascading failures and interrupt entire function chains, with potential to degrade network performance and disrupt service. In this paper, we propose the first resilience mechanism for disaggregated mobile networks that leverages the adaptive reinstantiation of RAN functions under uncertainty to mitigate disruptions and maintain service continuity in the presence of compromised infrastructure. Our mechanism reacts to cascading failures that disrupt Radio Units (RUs) by reinstantiating Central Units (CUs) and Distributed Units (DUs) in alternative cloud locations, restoring their function chains while accounting for uncertainty in users' locations and wireless channel conditions during the in-failure state. We formulate this recovery process as a two-stage stochastic optimization problem, where reinstantiation and routing decisions are made under uncertainty, and bandwidth allocation decisions are performed after uncertainty is resolved. We solve the problem using a Sample Average Approximation (SAA)-based solution as a tractable, deterministic equivalent problem. We numerically evaluate our approach on a real-world disaggregated mobile network topology across multiple failure scenarios and traffic demand conditions, and our results demonstrate that our solution can achieve up to 80% higher recovery performance compared to conventional resilience mechanisms.
arXiv:2511.09884v2 Announce Type: replace
Abstract: Mission critical (MC) applications such as defense operations, energy management, cybersecurity, and aerospace control require reliable, deterministic, and low-latency decision making under uncertainty. Although the classical Artificial Intelligence (AI) approaches are effective, they often struggle to meet the stringent constraints of robustness, timing, explainability, and safety in the MC domains. Quantum Artificial Intelligence (QAI), the fusion of artificial intelligence and quantum computing (QC), can potentially provide transformative solutions to the challenges faced by classical ML models. QAI is a broader umbrella than Quantum Machine Learning (QML) and additionally includes quantum optimization, search, and reasoning; we use QAI throughout the paper for the field at large, and QML only for learning-specific subroutines. The principal contributions of this work are: (i) a systematic survey of QAI methods analyzed through the lens of MC requirements like certification, robustness, and timing; (ii) a conceptual quantum cloud resource management and scheduling framework with deployment assumptions, complexity analysis, and failure-mode discussion; and (iii) an identification of the gaps between current QAI capabilities and MC systems requirements. We also propose a conceptual model for management of quantum resources and scheduling of applications driven by timeliness constraints. We discuss multiple challenges, including trainability limits, data access, and loading bottlenecks, verification of quantum components, and adversarial QAI. Finally, we outline future research directions toward achieving interpretable, scalable, and hardware-feasible QAI models for MC application deployment.
arXiv:2511.09378v2 Announce Type: replace
Abstract: A series of influential studies established that large language models cannot reliably solve even simple planning tasks. We show that the latest generation of frontier models overturns this conclusion. We evaluate three families of frontier LLMs on a challenging set of planning tasks based on the most recent International Planning Competition following rigorous evaluation guidelines: solutions are verified with a validation tool, tasks are freshly created to avoid data contamination, and performance is compared against state-of-the-art classical planners. On standard task descriptions, Gemini 3.1 Pro outperforms the strongest planner baseline (245 vs. 234 solved tasks out of 360), while GPT-5 achieves comparable performance to the baselines. When all semantic information is obfuscated from the descriptions to test for pure symbolic planning, performance degrades but Gemini 3.1 Pro remains competitive with the strongest baselines. A longitudinal comparison across model generations -- from GPT-3.5, which solves zero tasks, to GPT-5 -- reveals a striking upward trajectory. Frontier LLMs might finally be able to plan; the question now is how far this capability will extend.
arXiv:2602.21536v2 Announce Type: replace
Abstract: Retrospective MRI harmonization is limited by poor scalability across modalities and reliance on traveling subject datasets. To address these challenges, we introduce IHF-Harmony, a unified invertible hierarchy flow framework for multi-modality harmonization using unpaired data. By decomposing the translation process into reversible feature transformations, IHF-Harmony guarantees bijective mapping and lossless reconstruction to prevent anatomical distortion. Specifically, an invertible hierarchy flow (IHF) performs hierarchical subtractive coupling to progressively remove artefact-related features, while an artefact-aware normalization (AAN) employs anatomy-fixed feature modulation to accurately transfer target characteristics. Combined with anatomy and artefact consistency loss objectives, IHF-Harmony achieves high-fidelity harmonization that retains source anatomy. Experiments across multiple MRI modalities demonstrate that IHF-Harmony outperforms existing methods in both anatomical fidelity and downstream task performance, facilitating robust harmonization for large-scale multi-site imaging studies. Code is available at https://github.com/Idea89560041/IHF-Harmony.
arXiv:2508.20810v3 Announce Type: replace
Abstract: Rigorous evaluation of domain-specific language models requires benchmarks that are comprehensive, contamination-resistant, and maintainable. Static, manually curated datasets do not satisfy these properties. We present a graph-based evaluation harness that transforms structured clinical guidelines into a queryable knowledge graph and dynamically instantiates evaluation queries via graph traversal. The framework provides three guarantees: (1) complete coverage of guideline relationships; (2) surface-form contamination resistance through combinatorial variation; and (3) validity inherited from expert-authored graph structure. Applied to the WHO IMCI guidelines, the harness generates clinically grounded multiple-choice questions spanning symptom recognition, treatment, severity classification, and follow-up care. Evaluation across five language models reveals systematic capability gaps. Models perform well on symptom recognition but show lower accuracy on treatment protocols and clinical management decisions. The framework supports continuous regeneration of evaluation data as guidelines evolve and generalizes to domains with structured decision logic. This provides a scalable foundation for evaluation infrastructure.
arXiv:2509.15267v2 Announce Type: replace
Abstract: The costs of generative model compute rekindled promises and hopes for efficient data curation. In this work, we investigate whether recently developed autoguidance and online data selection methods can improve the time and sample efficiency of training generative diffusion models. We integrate joint example selection (JEST) and autoguidance into a unified code base for fast ablation and benchmarking. We evaluate combinations of data curation on a controlled 2-D synthetic data generation task as well as (3x64x64)-D image generation. Our comparisons are made at equal wall-clock time and equal number of samples, explicitly accounting for the overhead of selection. Across experiments, autoguidance consistently improves sample quality and diversity. Early AJEST (applying selection only at the beginning of training) can match or modestly exceed autoguidance alone in data efficiency on both tasks. However, its time overhead and added complexity make autoguidance or uniform random data selection preferable in most situations. These findings suggest that while targeted online selection can yield efficiency gains in early training, robust sample quality improvements are primarily driven by autoguidance. We discuss limitations and scope, and outline when data selection may be beneficial.
arXiv:2504.13850v2 Announce Type: replace
Abstract: Federated learning (FL) systems facilitate distributed machine learning across a server and multiple devices. However, FL systems have low resource utilization on servers and devices, limiting their practical use in the real world. This inefficiency primarily arises from two types of idle time: (i) task dependency between the server and devices, and (ii) stragglers among heterogeneous devices. This paper introduces FedOptima, a resource-optimized FL system designed to simultaneously minimize both types of idle time; existing systems do not eliminate or reduce both at the same time. FedOptima offloads the training of certain layers of a neural network from a device to a server using three innovations. First, devices operate independently of each other using asynchronous aggregation to eliminate straggler effects, and independently of the server by utilizing auxiliary networks to minimize idle time caused by task dependency. Second, the server performs centralized training using a task scheduler that ensures balanced contributions from all devices, improving model accuracy. Third, an efficient memory management mechanism on the server increases the scalability of the number of participating devices. Extensive experiments are conducted on multiple lab-based testbeds, evaluated on image classification and sentiment analysis tasks with CNNs and Transformers. Compared to four state-of-the-art offloading-based and asynchronous FL baselines, FedOptima (i) achieves higher or comparable accuracy, (ii) accelerates training by 1.9x to 21.8x, (iii) reduces server and device idle time by up to 93.9% and 81.8%, respectively, and (iv) increases throughput by 1.1x to 2.0x.
arXiv:2605.15403v1 Announce Type: new
Abstract: Mixture-of-Experts (MoE) models rely on balanced expert utilization to fully realize their scalability. However, existing load-balancing methods are largely heuristic and operate on noisy mini-batch assignment statistics, introducing bias relative to population-level objectives. We propose $\phi$-balancing, a principled framework that directly targets population-level expert balance by minimizing a strictly convex, symmetric, and differentiable potential of the expected routing distribution. Using convex duality, we derive an equivalent min-max formulation and obtain a simple online algorithm via mirror descent, yielding an efficient EMA-based routing adjustment with negligible overhead. Across large-scale pretraining and downstream fine-tuning, $\phi$-balancing consistently outperforms prior Switch-style and loss-free baselines, demonstrating more stable and effective expert utilization.
arXiv:2605.15397v1 Announce Type: new
Abstract: Illegal gold mining in the Amazon rainforest causes deforestation, water contamination, and long-term ecosystem disruption, yet remains difficult to monitor at fine spatial scales. Satellite imagery supports large-scale observation, but often misses small mining-related structures and subtle land-cover transitions, especially under frequent cloud cover. We introduce ELDOR, a large-scale UAV benchmark for monitoring environmental and landscape disturbance from illegal gold mining in the rainforest. ELDOR contains manually annotated orthomosaic imagery covering over 2,500 hectares, with pixel-level semantic labels for both mining-related activities and surrounding ecological structures. With this unified annotation source, we establish four benchmark tasks: semantic segmentation, segmentation-derived recognition, direct multi-label classification, and class-presence recognition with vision-language models. Across these tasks, we compare generic and remote-sensing-specific segmentation models, vision foundation model-related segmentation methods, direct multi-label classification methods, and vision-language models under a controlled closed-set protocol. Results show that current methods still struggle with rare small-scale mining structures and fine-grained recovery classes, suggesting the need for context-aware and multimodal modeling. To support domain analysis and practical use, we further build an interactive explorer for domain experts that provides a unified interface for data exploration and model inference.
arXiv:2605.15394v1 Announce Type: new
Abstract: Joint-embedding predictive architectures (JEPAs) propose that a model should learn more useful abstractions when trained to predict latent representations rather than observed outputs. For autoregressive language-model fine-tuning the principle entails a stricter requirement: the induced hidden-state geometry must reach the language-model head \emph{and} improve the decoded task metric. We test that requirement under a fixed Llama-3.2-1B-Instruct LoRA harness on natural-language-to-regex generation, comparing twenty-two training-time auxiliaries across trajectory-shape regularisation, distributional constraints, predictor/target asymmetry, Fisher-metric Jacobi residuals, and a decoder-visible JEPA objective constructed to lie in cross-entropy's positive cone. The empirical answer is a structured null: several auxiliaries clear single-cell paired $\alpha = 0.10$ without correction (T3-Local at $\Delta = +2.53$~pp, $p = 0.003$ being the strongest), but none survives Bonferroni or Holm--Bonferroni at the relevant family-wise threshold, even though many change curvature, anisotropy, variance, and gradient direction. Decoder-visible JEPA yields the first positive auxiliary--cross-entropy gradient cosine in the study, yet exact match remains inside seed noise; a full-fine-tuning replication of the same auxiliary at $n = 5$ seeds reproduces the null on both benchmarks (TURK: $\Delta = +0.04$~pp, $p_{\text{paired}} = 0.96$; SYNTH: $\Delta = +0.52$~pp, $p_{\text{paired}} = 0.28$), so the null is robust across LoRA and full fine-tuning for the decoder-visible construction. Hidden-state representation work and decoded-task accuracy are therefore weakly coupled in this regime; we accordingly reframe LLM-domain JEPA evaluation as a coupling problem, in which the operative question is under which metrics useful hidden geometry becomes decoder-visible task signal.
arXiv:2605.15393v1 Announce Type: new
Abstract: As large language models (LLMs) are increasingly deployed to perform tasks with minimal human oversight, it is crucial that these models operate robustly. In particular, a model that can solve a given problem should not fail simply because certain entities$\unicode{x2013}$such as names, numbers, or other contextual details$\unicode{x2013}$have changed while the underlying problem logic remains the same. Prior work suggests that current LLMs still struggle with this form of robustness: they often succeed on some variations of a problem but fail on others. However, existing evaluations often lack a systematic way to identify which logic-preserving variations are most likely to induce failure. Instead, they typically test a random subset of allowable variations, which can overstate robustness. To address this gap, we introduce logic-preserving difficulty scaling (LPDS), a framework that (i) quantifies the difficulty of a problem variation and (ii) systematically searches the space of allowable variations to find those that maximize difficulty and expose failures. We show that as difficulty increases, performance declines and errors in the models' reasoning chains become more pronounced. We further demonstrate that LPDS efficiently finds difficult problem variations for a model, resulting in performance drops up to 5 times larger compared to random sampling. Finally, we show that fine-tuning on more difficult variations leads to more consistent robustness gains than training on easier ones.
arXiv:2602.21141v2 Announce Type: replace
Abstract: Object perception is fundamental for tasks such as robotic material handling and quality inspection. However, modern supervised deep-learning models require large annotated datasets for robust automation under semi-uncontrolled conditions; a major barrier for widespread deployment with proprietary industrial parts. We address this through an integrated framework combining synthetic data generation and structured empirical evaluation for systematic investigation of bidirectional sim-to-real transfer. Our method integrates 2D-to-3D Reality-to-Simulation techniques for 3D asset creation from physical parts with programmatic Guided Domain Randomization (GDR) via SynthRender, an open-source synthetic image generation framework. Structured ablation studies across multiple benchmarks quantify the impact of individual rendering design choices, yielding practical guidelines for dataefficient synthetic training. To support evaluation under realistic industrial conditions, we introduce Industrial Real-Sim Imagery Set (IRIS), a 32-class dataset with diverse textures, intra-class variation, strong inter-class similarities, and 19,672 annotations, providing both CAD models and reconstructed meshes for bidirectional sim-to-real benchmarking. Across three industrial benchmarks, the proposed framework achieves highly competitive performance, reaching 99.1% mAP@50 on a public robotics dataset, 98.3% mAP@50 on an automotive benchmark, and 95.3% mAP@50 on IRIS.