arXiv:2509.11002v2 Announce Type: replace
Abstract: Controlling turbulent dynamics remains a major challenge because of its chaotic, multi-scale dynamics, which strongly influence the performance of many fluid systems. Here we report REACT (Reinforcement Learning for Environmental Adaptation and Control of Turbulence), an autonomous reinforcement learning framework for real-time state-dependent control of turbulent wake dynamics in a real wind-tunnel environment. Deployed on an Ahmed-body model equipped solely with onboard sensors and servo-actuated surfaces, REACT learns directly from sparse experimental measurements in a wind-tunnel environment, bypassing empirical turbulence models. The agent autonomously converges to a policy that reduces aerodynamic drag while achieving net energy savings. Without prior knowledge of flow physics, it discovers that dynamically suppressing spatiotemporally coherent flow structures in the bluff-body wake maximizes energy efficiency, achieving two to four times greater performance than model-based baseline controllers. We contrast the state-dependent, dynamics-aware policy of REACT with representative quasi-steady, mean-flow-oriented policies learned by standard reinforcement learning baselines, which deliver lower drag reduction and no direct suppression of coherent instabilities in this turbulent-wake regime. Finally, by training in a nondimensional state-reward space whose amplitudes are approximately Reynolds-number-invariant, and by conditioning on Reynolds number for temporal adaptation, REACT learns a single offline policy that remains effective across the tested Reynolds-number range 86,400 to 518,400, without retraining. These results demonstrate autonomous closed-loop reinforcement learning control in a high-Reynolds-number wind-tunnel environment and suggest a path toward data-driven state-dependent control of turbulent flows.
Science Journals
arXiv:2605.15205v1 Announce Type: new
Abstract: Improving the Theory of Mind (ToM) capability of Large Language Models (LLMs) is crucial for effective social interactions between these AI models and humans. However, the existing benchmarks often measure ToM capability improvement through story-reading, multiple-choice questions from a third-person perspective, while ignoring the first-person, dynamic, and open-ended nature of human-AI (HAI) interactions. To directly examine how ToM improvement techniques benefit HAI interactions, we first proposed the new paradigm of interactive ToM evaluation with both perspective and metric shifts. Next, following the paradigm, we conducted a systematic study of four representative ToM enhancement techniques using both four real-world datasets and a user study, covering both goal-oriented tasks (e.g., coding, math) and experience-oriented tasks (e.g., counseling). Our findings reveal that improvements on static benchmarks do not always translate to better performance in dynamic HAI interactions. This paper offers critical insights into ToM evaluation, showing the necessity of interaction-based assessments in developing next-generation, socially aware LLMs for HAI symbiosis.
arXiv:2605.15860v1 Announce Type: new
Abstract: Accurate geometric calibration of RGB-thermal infrared (TIR) stereo camera systems is essential for multimodal building envelope analysis, yet remains challenging when low-cost thermal sensors with very low spatial resolution are employed. This paper presents a practical stereo calibration framework for an RGB camera (2028 x 1520 px) paired with a TIR camera operating at only 80 x 62 px - a pixel-count ratio of approximately 1:625. An active OLED screen dynamically switches modality-specific patterns (checkerboard for TIR, ChArUco for RGB) on a single physical surface, providing controlled and repeatable thermal contrast. A dedicated corner detection algorithm combining perspective rectification, Hessian saddle-point analysis, and Mean Shift localisation achieves reliable checkerboard detection at 80 x 62 px without per-frame parameter tuning. A baseline-constrained bundle adjustment enforces physically consistent rig geometry under the planar-calibration-object degeneracy, yielding a stereo baseline of 32.7 mm (nominal 30 mm) with an overall reprojection error of 0.382 px. The system is validated on a thermally active building mock-up using constant-depth and per-pixel depth estimation, demonstrating consistent TIR-to-RGB projection suitable for building energy performance assessment.
arXiv:2605.15774v1 Announce Type: new
Abstract: Traditional Fully Homomorphic Encryption (FHE) schemes often suffer from prohibitive computational overhead and complex noise management. In this paper, we propose a novel symmetric FHE through a mechanism of plaintext fragmentation and dynamic interposition. Our approach is built upon a modular encryption foundation, c = mk + rp, which is naturally additive but typically limited by exponential noise growth during multiplication. To resolve this, we introduce an interposition framework where the plaintext is partitioned into multiple fragments across distinct logical positions. We introduce a dual-regulator system to govern the multiplication process; exponent regulators (t_i) redirect the product of fragments to a new target position, preventing the accumulation of secret key exponents, while coefficient regulators (d_i) normalize the resulting scalars. Security is established through a binding mechanism where exponents and coefficients are mutually dependent, shielding the secret key k from algebraic manipulation and substitution attacks.
arXiv:2506.01732v3 Announce Type: replace
Abstract: Large Language Models (LLMs) are pre-trained on large amounts of data from different sources and domains. Such datasets often contain trillions of tokens, including large portions of copyrighted or proprietary content, which raises questions about the legal use of such models. This underscores the need for truly open pre-training data that complies with data security regulations. In this paper, we introduce Common Corpus, the largest open dataset for LLM pre-training. The data assembled in Common Corpus are either uncopyrighted or under open licenses, totaling about two trillion tokens. The dataset contains a wide variety of languages, ranging from the high-resource European languages to some low-resource languages rarely represented in pre-training datasets. In addition, it includes a large amount of code data. The diversity of data sources in terms of covered domains and time periods opens up the paths for both research and entrepreneurial needs across diverse areas of knowledge. In this paper, we present the detailed provenance of data assembling and the details of dataset filtering and curation. We train two small language models on Common Corpus and find that they perform comparably to other models of their size, indicating that our dataset is suitable for multilingual pretraining. Common Corpus represents a key contribution to the ecosystem for open science research on Large Language Models.
arXiv:2509.05030v2 Announce Type: replace
Abstract: To enable large-scale reuse of real-world 3D assets, where garments and characters rarely share skeletons, templates, or dense correspondences, we present a fully automated virtual try-on system that dresses complex, multi-layer garments onto diverse, arbitrarily posed humanoids. Our key idea is to use SMPL as an intermediate proxy and decompose clothing-to-body transfer into two correspondence tasks with distinct challenges: (1) clothing-to-SMPL (partial-to-complete alignment) and (2) body-to-SMPL (large pose/shape variation and stylization). We address clothing-to-SMPL using a geometry-driven correspondence model, and introduce a diffusion-based body-to-SMPL correspondence approach that leverages multi-view consistent appearance features together with a pretrained 2D foundation model. Using these correspondences, we register SMPL/SMPL+D (Displacement) to the garment and target body and then perform simulator-driven fitting by transferring the garment along a smooth SMPL-to-SMPL+D transition, producing physically plausible draping on the target. Our system handles complex garment topology (including non-manifold meshes) and generalizes to a wide range of humanoid characters (e.g., humans, robots, cartoons, and creatures) while remaining computationally practical. Upon draping, our system also supports fast customization of clothing size. We show that our system can produce high-quality 3D clothing fittings without any human labor, even when 2D clothing sewing patterns are not available. Our project page is: https://cao-cong0.github.io/LUIVITON-Learned-Universal-Interoperable-VIrtual-Try-ON/.
arXiv:2605.15241v1 Announce Type: cross
Abstract: Single-unit crown restoration is among the most common procedures in clinical dentistry, with CAD/CAM workflows now designing crowns directly from intraoral scans. Partial scans are often preferred over full-arch scans for single-unit cases due to fewer stitching errors, yet most segmentation networks trained on full arches fail on partial scans, while end-to-end generative crown methods often produce over-smoothed surfaces that lose occlusal detail. We propose an end-to-end pipeline that takes a raw intraoral scan and target FDI tooth number as input and outputs an initial, patient-specific crown proposal for clinician refinement. The pipeline has three phases: (I) data preparation and pose standardization; (II) segmentation routed by scan type; and (III) crown proposal generation via context-aware retrieval and Blender-based fitting. We address partial-scan segmentation through a classify-then-align strategy: a DGCNN classifier categorizes the scan into one of five anatomical types, then coarse-to-fine RANSAC+ICP registration standardizes the jaw coordinate frame, followed by graph-cut optimization to refine tooth-gingival boundaries. Trained on 1,958 partial scans, the pipeline achieves macro-average DSC 0.9249, Recall 0.8919, and Precision 0.9615 across 17 semantic classes; a fine-tuned full-arch model reaches DSC 0.9347. The prepared tooth and its mesial and distal neighbors achieve DSC 0.9468-0.9569 with sub-millimeter Centroid Errors (0.2666-0.2774 mm). These centroids anchor a retrieval module using DGCNN embeddings and cosine similarity over neighboring and opposing teeth, followed by spline-guided alignment and Blender Python API refinement. The pipeline produces a preliminary crown shell in 2.5-3.5 minutes, offering a practical alternative to end-to-end generative approaches.
arXiv:2605.15507v1 Announce Type: new
Abstract: For a Gaussian source under mean-squared error (MSE), classical transform coding is rate--distortion (RD) optimal: the Karhunen--Loeve transform (KLT) diagonalizes the covariance, reverse waterfilling allocates the bits, and scalar quantization closes the loop. This elegant story breaks down for multimodal sources, where no single covariance can capture heterogeneous local geometries, and the RD function loses its closed form. We revisit this problem through Gaussian-mixture sources and develop a constructive RD theory for them. Our key finding is that the mixture structure incurs only a component label cost. Conditioned on the active mixture component, each branch is Gaussian; the challenge is allocating bits across heterogeneous branches. We prove that the genie-aided conditional RD function is governed by a single global reverse-waterfilling level shared across all components and eigenmodes. Building on this result, we introduce PrismQuant, which transmits the component label losslessly and encodes the residual using the component-matched KLT, followed by scalar quantization, achieving a rate of H(C)/n bits per source dimension of the converse, with a vanishing asymptotic gap. We further develop a practical implementation based on EM-driven Gaussian-mixture learning, component-adaptive KLTs, and entropy-constrained scalar quantization (ECSQ). Experiments on synthetic Gaussian mixtures show that PrismQuant closely approaches the theoretical RD bound, while experiments on real-world channel-state-information (CSI) data demonstrate competitive or superior performance compared with transformer-based learned codecs at more than one order of magnitude smaller model size.
arXiv:2605.15232v1 Announce Type: new
Abstract: Test Suite Minimization (TSM) reduces the size of test suites while preserving their fault detection capability. In black-box TSM, reduction is performed without analyzing production code. While several black-box TSM approaches have explored metrics like test logs or test similarity, those often suffer from scalability and efficiency issues. On the other hand, change-proneness (CP), recently emerged as an efficient and scalable alternative metric, has only been applied at class level. To accurately identify fault-revealing test cases, we propose CP at finer-grained method-level and implement Method-level Change-proneness based Test-suite Minimization (MCTM). MCTM first calculates CP for each method from version control metadata, then determines the dependency between test cases and methods by analyzing the test-code call-graph. Next, it scores the association between test cases and their invoked methods using statistical measures such as Average, Geometric Mean etc. Finally, test cases with the highest scores are selected to form the reduced suite. Evaluation on 15 open-source Java projects with 635 buggy versions shows MCTM achieves 0.93 accuracy and 0.94 fault detection rate on average, significantly outperforming class-level CP and similarity-based approaches while maintaining superior efficiency.
arXiv:2506.16129v2 Announce Type: replace
Abstract: Neurosymbolic learning can use symbolic rules to provide supervision for latent concepts from weak labels, but it commonly assumes that the entities referenced by these rules are already specified. Object-centric models decompose images into slot-like representations; however, such slots are not necessarily aligned with the predicates required for symbolic reasoning. We investigate object-centric neurosymbolic learning under distant supervision, where the object-level arguments of a logic program are learned directly from images using only global task labels. We introduce DeepObjectLog, a probabilistic neurosymbolic model that integrates a slot-based perceptual encoder with a probabilistic logic layer. The encoder predicts objectness and class probabilities for candidate object representations, while the logic layer marginalizes over latent objectness and class assignments to compute the likelihood of the observed label. This formulation provides a differentiable task-level learning signal for object-centric perception without requiring per-object labels, masks, bounding boxes, or heuristic set matching. Evaluations across diverse visual reasoning tasks demonstrate that DeepObjectLog achieves superior out-of-distribution generalization to compositional, object-count, and rule shifts compared to neural object-centric and standard neurosymbolic baselines.
arXiv:2605.16178v1 Announce Type: new
Abstract: Accurate seasonal runoff forecasts are critical for managing California's reservoirs and water supply for millions of its residents. Winter snow accumulation provides a strong source of predictability of snowmelt-based runoff in the spring and summer months, but progressive hydroclimatic changes in the Sierra Nevada are altering its timing and volume. These changes reduce the skill of statistical forecasts trained on historical data, highlighting the need for improved forecasting systems that can capture the changing dynamics of snowmelt. Here we demonstrate that a collaborative workflow between an agentic AI assistant and an automated code-mutation system, both powered by large language models, can accelerate the development of competitive seasonal runoff forecasting systems. In our framework, the AI agent discovers relevant datasets, synthesizes domain knowledge from prior forecasting competitions and the scientific literature, and explores the space of model architectures, while the code-mutation system refines each of the solutions explored by the agent through Monte Carlo Tree Search over the code space. The resulting system forecasts monthly Full Natural Flow (FNF) at 1- to 6-month lead times across 23 Sierra Nevada watersheds using an adaptive ensemble of three XGBoost quantile regression sub-models with physics-informed feature engineering. Evaluated against California's operational Bulletin 120 forecasts over 2021-2025, the agent-evolved model achieves superior skill for early-season cumulative April-July runoff predictions, reducing watershed-averaged quantile forecast error by up to 29%, and offering a new paradigm for AI-driven scientific model development in the geosciences.
arXiv:2605.15745v1 Announce Type: new
Abstract: Autonomous ride-hailing platforms must strategically position idle robotaxis to minimize the wait times of prospective riders. We formalize this as the \emph{robotaxi placement problem} ($k$-RP). Given a finite metric space and a demand distribution over its points, the goal is to position $k$ robotaxis to minimize the expected total distance in a perfect matching between the robotaxis and $k$ random riders. We present several theoretical results for this stochastic optimization problem. First, we observe that sampling robotaxi locations independently according to the demand distribution yields a randomized $2$-approximation algorithm. Second, we present an explicit inapproximability bound via a novel gap-preserving reduction from the maximum coverage problem. Furthermore, while it is not even clear whether the exact expected cost of a placement can be computed efficiently on general metrics, we design an exact polynomial-time dynamic programming algorithm for $k$-RP in tree metrics by decoupling the stochastic matching dependencies. Finally, empirical evaluations on real-world ride-hailing data reveal that a variance-reduced random placement strategy is highly effective in practice, yielding expected wait times that are very close to those obtained by computationally heavy exact algorithms for the uniform capacitated $k$-median problem.
arXiv:2603.23351v2 Announce Type: replace
Abstract: Laser-enhanced contact optimization (LECO) has emerged as an important method for simultaneously reducing contact resistivity and metallization-induced recombination in advanced crystalline silicon solar cells, thereby enabling concurrent gains in fill factor and open-circuit voltage, particularly in TOPCon devices. However, broader industrial transferability remains constrained by the need to preserve these gains within a narrow process window and by unresolved, architecture-dependent questions regarding the kinetic stability of some LECO-modified interfaces. LECO is therefore examined in this review as a coupled multiphysics process that links localized electrothermal activation and microstructural evolution to device-level electrical signatures through an instantaneous regime map and a reliability classification based on time-dependent drift. A predictive workflow is outlined that couples transient electrothermal modeling with reduced state metrics, including effective diffusion depth and local areal energy density, and propagates calibrated thresholds across the recipe space. The framework separates stable optimization from marginal activation and latent damage, while explaining why fine-line scaling and copper-containing contact stacks can tighten stability margins through current localization and diffusion-barrier constraints. These insights provide a basis for reliability-aware process-window design and future digital-twin-assisted optimization of LECO for scalable, high-efficiency silicon photovoltaics.
arXiv:2605.16068v1 Announce Type: new
Abstract: Modeling data lineage in relational databases remains a challenging problem, particularly in scenarios involving incomplete or missing dependencies between database objects. In this paper, we propose a novel ontology for relational database data lineage, designed to provide a richer and more expressive semantic representation supporting discovering the lineage links by means of knowledge graphs (KGs). Building upon our previous work on KG-based lineage discovery, the proposed ontology extends the earlier model with additional concepts capturing structural, semantic, and transformation-level characteristics of relational data. These extensions enable more precise encoding of lineage evidence. To evaluate the impact of the proposed ontology, we conduct a comparative study using a KG-based inductive link prediction framework. Specifically, we assess the performance of a graph neural network model based on path embeddings under two settings: using the original baseline ontology and the newly proposed one. Experimental results demonstrate that the application of the enriched semantic model leads to improvements in lineage link prediction performance, as measured by AUC and Hits@10 metrics.
arXiv:2505.24573v2 Announce Type: replace
Abstract: In this work, we introduce maximally recoverable codes with locality and availability. We consider locally repairable codes (LRCs) where certain subsets of $ t $ symbols belong each to $ N $ local repair sets, which are pairwise disjoint after removing the $ t $ symbols, and which are of size $ r+\delta-1 $ and can correct $ \delta-1 $ erasures locally. Classical LRCs with $ N $ disjoint repair sets and LRCs with $ N $-availability are recovered when setting $ t = 1 $ and $ t=\delta-1=1 $, respectively. Allowing $ t > 1 $ enables our codes to reduce the storage overhead for the same locality and availability. In this setting, we define maximally recoverable LRCs (MR-LRCs) as those that can correct any globally correctable erasure pattern given the locality and availability constraints. We then identify a large class of global erasure patterns that can be corrected by such MR-LRCs and prove that they are all the correctable patterns when $ t=1 $. We provide three explicit constructions of LRCs that can correct such erasure patterns (thus MR-LRCs for $ t=1 $), based on MSRD codes, each attaining the smallest finite-field sizes for some parameter regime. Finally, we extend the known lower bound on finite-field sizes from classical MR-LRCs to our setting (for any value of $ t $).
arXiv:2605.15413v1 Announce Type: new
Abstract: Despite the remarkable success of transformer architectures in natural language processing, their scalability limitations remain poorly understood through systematic empirical analysis. This paper presents the first comprehensive large-scale evaluation of 118 transformer models across seven distinct architectural categories, revealing fundamental performance walls that manifest as hard deployment constraints. Our systematic benchmarking methodology uncovers a critical scalability crisis: while 88.1% of models successfully process sequences up to 512 tokens, this drops dramatically to 44.9% at 1024 tokens, with complete failure (0%) at 2048 tokens. Through rigorous analysis of loading times, memory consumption, and computational efficiency across sequence lengths from 128 to 2048 tokens, we demonstrate that compressed models achieve superior parameter efficiency (649.2 tokens/sec/M parameters) compared to large generative models (12.5 tokens/sec/M). Our findings challenge prevailing scaling assumptions and provide the first quantitative evidence that the theoretical O(n2) attention complexity translates into measurable performance walls. This work establishes new benchmarking methodologies for transformer evaluation and provides critical insights for practical deployment decisions in production environments.
arXiv:2605.14236v2 Announce Type: replace
Abstract: Pairwise Ranking Prompting (PRP) elicits pairwise preference judgments from an LLM, which are then aggregated into a ranking, usually via classical sorting algorithms. However, judgments are noisy, order-sensitive, and sometimes intransitive, so sorting assumptions do not match the setting. Because sorting aims to recover a full permutation, truncating it to meet a call budget does not produce a dependable top-K. We thus reframe PRP reranking as active learning from noisy pairwise comparisons and show that active rankers are drop-in replacements that improve NDCG@10 per call in the call-constrained regime. Our noise-robust framework also introduces a randomized-direction oracle that uses a single LLM call per pair. This approach converts systematic position bias into zero-mean noise, enabling unbiased aggregate ranking without the cost of bidirectional calls.
arXiv:2605.15209v1 Announce Type: new
Abstract: This study introduces an innovative Isotropic Elastic Lattice Spring Model (IELSM) that addresses the fundamental limitation of classical lattice spring models: the constraint of fixed Poisson's ratio. By amending the total strain energy within the Lattice Spring Model (LSM), IELSM provides a self-consistent formulation for simulating isotropic elastic materials with arbitrary Poisson's ratios. The model's core innovation lies in augmenting classical axial spring frameworks with additional volumetric constraints, establishing a direct and exact mapping between IELSM's parameters and macroscopic elastic constants. This enables simulation across the full admissible Poisson's ratio: -1 < {\nu} < 1 under plane stress and -1 < {\nu}< 0.5 under plane strain conditions. Eigenvalue analysis indicates that the IELSM has better numerical stability compared to the standard bilinear quadrilateral element and the constant strain triangular element. The characteristic of the numerical implementation lies in directly decomposing the additional volumetric constraints into an equivalent combination of standard mechanical components (axial, shear and rotational springs), laying the foundation for the realization of fracture simulation based on discrete methods. Comprehensive validation through uniaxial tension, pure shear, stress concentration around a circular hole, and stress singularity analyses for central and crucifix-shaped cracks demonstrates IELSM's exceptional accuracy, convergence and computational robustness. The model exhibits excellent performance in stress intensity factor calculations at crack tips, validating its effectiveness for singular stress field analysis. This work bridges the gap between LSM and continuum mechanics, establishing an analog framework that maintains theoretical consistency while offering computational accuracy for the solution of elastic boundary value problems.
arXiv:2605.15208v1 Announce Type: new
Abstract: Large Language Models are routinely compressed via post-training quantization to reduce inference costs and memory footprint for cloud and edge deployment, yet the impact of this compression on model quality remains poorly understood. Existing studies typically compare only two conditions (full-precision vs. a single quantized variant), rely on aggregate bias metrics, and evaluate a single model family, making it impossible to distinguish gradual degradation from threshold-dependent safety failures. We conduct a controlled empirical study of three instruction-tuned models (Qwen2.5-7B, Mistral-7B, Phi-3.5-mini) at five precision levels (BF16 through 3-bit) on 12,148 BBQ bias benchmark items across 5 random seeds, totaling 911,100 inference records. Our results reveal that 3-bit quantization causes 6-21% of previously unbiased items to develop new stereotypical behaviors, following a clear dose-response pattern confirmed via logistic regression, while models' willingness to select "unknown" answers declines by 17.4%. Crucially, these item-level changes are invisible to standard quality metrics: perplexity increases by less than 0.5% at 8-bit and under 3% at 4-bit across all three models, yet 2.5-5.6% of items already develop new biases at 4-bit. These findings demonstrate that aggregate evaluation metrics systematically miss fairness-critical degradation, underscoring the need for quality-aware compression protocols that explicitly test for bias emergence before deployment.
arXiv:2601.12894v2 Announce Type: replace
Abstract: Diffusion Policy has dominated action generation due to its strong capabilities for modeling multi-modal action distributions, but its multi-step denoising processes make it impractical for real-time visuomotor control. Existing caching-based acceleration methods typically rely on $\textit{static}$ schedules that fail to adapt to the $\textit{dynamics}$ of robot-environment interactions, thereby leading to suboptimal performance. In this paper, we propose $\underline{\textbf{S}}$parse $\underline{\textbf{A}}$ction$\underline{\textbf{G}}$en ($\textbf{SAG}$) for extremely sparse action generation. To accommodate the iterative interactions, SAG customizes a rollout-adaptive prune-then-reuse mechanism that first identifies prunable computations globally and then reuses cached activations to substitute them during action diffusion. To capture the rollout dynamics, SAG parameterizes an observation-conditioned diffusion pruner for environment-aware adaptation and instantiates it with a highly parameter- and inference-efficient design for real-time prediction. Furthermore, SAG introduces a one-for-all reusing strategy that reuses activations across both timesteps and blocks in a zig-zag manner, minimizing the global redundancy. Extensive experiments on multiple robotic benchmarks demonstrate that SAG achieves up to 4$\times$ generation speedup without sacrificing performance. Project Page: https://sparse-actiongen.github.io.
arXiv:2603.13608v2 Announce Type: replace
Abstract: The concept of matrix D-stability plays an important role in applications, ranging from economic and biological system models to decentralized control. Here we provide necessary and sufficient Lyapunov-type conditions for the robust (block) D-stability property. We leverage this characterization as part of a novel Lyapunov analysis of decentralized integral control for MIMO LTI systems, providing sufficient conditions guaranteeing stability under low-gain and under arbitrary connection and disconnection of individual control loops.
arXiv:2509.10825v5 Announce Type: replace
Abstract: Explaining a trained model requires a clear account of how explanatory evidence is generated. We propose CUBE, a post-hoc explanation framework that brings factorial experimental design to black-box model analysis. CUBE evaluates a trained predictor on balanced low--high probe combinations and summarizes the responses as factorial effects. Main effects and pairwise interactions are interpreted as controlled contrasts on a specified explanation region. Complete factorial probes identify these effects exactly on the selected design space, while fractional probes reduce query cost and expose aliasing and resolution constraints. Experiments on synthetic and real tabular tasks show that CUBE recovers dominant learned effect structure and clarifies the identifiability limits of query-efficient explanations.
arXiv:2505.21535v4 Announce Type: replace
Abstract: While transformers dominate modern vision and language models, their attention mechanism remains poorly suited for in-memory computing (IMC) devices due to intensive activation-to-activation multiplications and non-local memory access, leading to substantial latency and bandwidth overhead on ReRAM-based accelerators. To address this mismatch, we propose FAR, a Function-preserving Attention Replacement framework that substitutes all attention in pretrained DeiTs with sequential modules inherently compatible with IMC dataflows. Specifically, FAR replaces self-attention with a multi-head bidirectional LSTM architecture via block-wise distillation to retain functional equivalence while enabling linear-time computation and localized weight reuse. We further incorporate structured pruning on FAR models, enabling flexible adaptation to resource-constrained IMC arrays while maintaining functional fidelity. Evaluations on the DeiT family demonstrate that FAR maintains comparable accuracy to the original attention-based models on ImageNet and multiple downstream tasks with reduced parameters and latency. Further analysis shows that FAR preserves the semantic token relationships learned by attention while improving computational efficiency, highlighting its potential for energy-efficient transformer inference on IMC-based edge accelerators.
arXiv:2605.14736v2 Announce Type: replace
Abstract: Target speech extraction remains difficult for compact devices because monaural neural models lack spatial evidence and classical beamformers lose resolving power when the microphone aperture is only a few centimetres. We present IsoNet, a user-selectable audio-visual target speech extraction system for a compact 4-microphone array. IsoNet combines complex multi-channel STFT features, GCC-PHAT spatial cues, face-conditioned visual embeddings, and auxiliary direction-of-arrival supervision inside a U-Net mask estimation network. Three curriculum variants were trained on 25,000 simulated VoxCeleb mixtures with progressively difficult SNR regimes. On a hard test set spanning -1 to 10 dB SNR, IsoNet-CL1 achieves 9.31 dB SI-SDR, a 4.85 dB improvement over the mixture, with PESQ 2.13 and STOI 0.84. Oracle delay-and-sum and MVDR beamformers degrade the same mixtures by 4.82 dB and 6.08 dB SI-SDRi, respectively, showing that the proposed learned multimodal conditioning solves a regime where conventional spatial filtering is ineffective. Ablation studies show consistent gains from visual conditioning, GCC-PHAT features, and extended delay-bin encoding. The results establish a compact-array, face-selectable speech extraction baseline under controlled simulation and identify the remaining barriers to real deployment, especially phase reconstruction, multi-interferer mixtures, and simulation-to-real transfer.
arXiv:2605.15725v1 Announce Type: new
Abstract: Latent Action Models (LAMs) enable the learning of world models from unlabeled video by inferring abstract actions between consecutive frames. However, LAMs face a fundamental trade-off between action abstraction and generation fidelity. Existing methods typically circumvent this issue by using two-stage training with pre-trained world models or by limiting predictions to optical flow. In this paper, we introduce DiLA, a novel Disentangled Latent Action world model that aims to resolve this trade-off via content-structure disentanglement. Our key insight is that disentanglement and latent action learning are co-evolving: the predictive bottleneck inherent in latent action learning serves as a driving force for disentanglement, compelling the model to distill spatial layouts into the structure pathway while offloading visual details to a separate content pathway for generation. This synergy yields a continuous, semantically structured latent action space without compromising generative quality. DiLA achieves superior results in video generation quality, action transfer, visual planning, and manifold interpretability. These findings establish DiLA as a unified framework that simultaneously achieves high-level action abstraction and high-fidelity generation, advancing the frontier of self-supervised world model learning.