arXiv:2605.19645v1 Announce Type: new
Abstract: Recent advancements in large language models (LLMs) have shown their remarkable capacities in many NLP tasks. However, their substantial size often presents challenges for deployment. This necessitates efficient techniques for model compression, with quantization emerging as a prominent solution. Despite its benefits, the exact impact of quantization (from 2- to 6-bit) on the performance and accuracy of LLMs remains an active area of research. This paper investigates the performance of eight LLMs at various quantization levels, focusing on tasks such as MMLU-Pro for knowledge processing and reasoning, CRUXEval for code comprehension, and MuSR for reading comprehension. Our results show a consistent trend where higher precision (e.g., 8-bit Q8\_0) yields improved performance, albeit with diminishing returns. Aggressive quantization (e.g., 2-bit Q2\_K) usually retains acceptable accuracy, though some models show a substantial loss in performance. Our findings indicate that while lower bit precision generally reduces performance, the impact varies across models and tasks. Larger models show greater resilience to aggressive quantization, but can still undergo significant drops at lower precision levels. Mid-sized models in the 7-9 billion parameter range strike an optimal balance between efficiency and resource usage. Such results provide insights into the trade-offs between model size, quantization, and performance.
Science Journals
arXiv:2605.19654v1 Announce Type: new
Abstract: The dichromatic number $\vec\chi(D)$ of a digraph is the minimum number $k$ such that $V(D)$ can be partitioned into $k$ subsets, each inducing an acyclic digraph. The acyclic number $\vec\alpha(D)$ is the cardinality of a largest induced acyclic subdigraph of $D$.
We study these problems from an approximation point of view. We begin with establishing that even when restricted to tournaments, approximating $\vec\chi$ and $\vec\alpha$ remain as challenging as their undirected counterparts on general graphs. Specifically, we establish that for every $\epsilon >0$, it is hard to approximate both $\vec\alpha$ and $\vec\chi$ up to a factor of $n^{1-\epsilon}$ even when restricted to tournaments.
We next consider approximate coloring of digraphs in special cases. We begin with establishing that we can color $\ell$-dicolorable digraphs using at most $\ell \cdot n^{1-\frac{1}{\ell}}$ colors in time $O(n^{2\ell})$; in particular, we can color $2$-dicolorable digraphs with $2\sqrt{n}$ colors in polynomial time. We then focus on bounding the dichromatic number of dense digraphs as a function of the independence number $\alpha$ of the underlying graph. We consider two special cases in this regard: digraphs with $\vec\chi(D)\leq 2$ and digraphs that do not contain any directed triangle. For these cases, we present algorithms which generalize and improve existing tools and results.
arXiv:2605.19655v1 Announce Type: new
Abstract: Automated driving systems require monitoring mechanisms to ensure operation as intended, especially when system elements degrade and/or fail. Hence, capability monitoring is crucial in order to evaluate the system's remaining performance and implement capability-based behavior. In this paper, we investigate the dynamics of a highly over-actuated automated vehicle under actuator degradations and failures, affecting the vehicle's motion control capabilities. We propose a lightweight prediction model based on conformalized quantile regression that predicts whether an automated vehicle can be controlled with sufficiently low lateral deviation from a planned trajectory under nominal, degraded, and failed actuator conditions. We recognize that statistical guarantees should hold not only across all data (marginal coverage) but also for different regimes within the data (conditional coverage). We therefore employ equalized coverage methods to address this challenge. During runtime behavior generation our predictor can provide a heuristic for determining the admissible action space. Its application and limitations are discussed in this paper.
arXiv:2605.19664v1 Announce Type: new
Abstract: Optical microcavities have emerged as a powerful platform for emulating topological phases challenging to realize in conventional materials, offering precise control over dispersion, light confinement, and interactions. Among them, liquid crystal microcavities (LCMCs) offer exceptional tunability at room temperature, enabling voltage-controlled polarisation splitting, photonic spin-orbit coupling, and photonic potentials generated by self-assembled textures, such as cholesteric torons and uniform lying helix (ULH). Here, we design a LCMC hosting a dimerized ULH texture and show that the corresponding photonic potential describes two coupled Su-Schrieffer-Heeger chains with orthogonal linear polarisations, acting as an effective pseudospin degree of freedom. The applied voltage tunes the interchain coupling, enabling polarisation-dependent interactions. These results establish LCMCs as a versatile platform for tunable synthetic topological Hamiltonians.
arXiv:2605.19666v1 Announce Type: new
Abstract: Accurate cardiac output (CO) estimation from photoplethysmography (PPG) is promising for unobtrusive hemodynamic monitoring, but remains difficult since CO is jointly determined by cardiac function and vascular tone. Conventional feature-based models use physiologically meaningful PPG descriptors, yet depend on accurate pulse detection and may miss latent temporal relationships. In contrast, fully end-to-end deep learning models learn directly from raw PPG but often underuse established PPG-derived prior information. Here, we introduce the Cross-View Attention Fusion Network (CVAF-Net), a prior-guided dual-view deep learning model for CO estimation from short, fixed-length PPG segments. CVAF-Net processes raw PPG as a temporal view and a feature sequence map (FSM) as a structured prior-guided view, and fuses the two representations through cross-view attention. The model was independently evaluated using 5-, 15-, and 30-s segments from three datasets: simulated pulse waves (3323 subjects), vasoconstriction provocation (79 subjects), and resting/cycling activities (10 subjects), and was compared with multiple machine learning and deep learning benchmarks. CVAF-Net outperformed most benchmark methods and achieved performance comparable to a state-of-the-art Transformer-based model, with a mean absolute error (MAE) of 0.19 L/min (MAPE: 3.95%) on simulated data and high accuracy in real-world settings (minimum MAE: 1.20 L/min). Importantly, CVAF-Net reduced FLOPs by twelvefold compared with the leading Transformer-based model. Plausibility analysis showed physiologically consistent CO estimates, with expected correlations with age ($\rho = -0.274$), heart rate ($\rho = 0.894$), and systemic vascular resistance ($\rho = -0.740$). These findings indicate that CVAF-Net provides an accurate, computationally efficient, and generalizable approach for continuous wearable-based CO monitoring.
arXiv:2605.19711v1 Announce Type: new
Abstract: Automatic speech recognition (ASR) has improved substantially in recent years, yet performance remains limited for low-resource languages. Large language models (LLMs) have shown promise for improving ASR through generative error correction (GER), but their effectiveness in low-resource settings remains underexplored. In addition, it remains unclear to what extent data contamination influences the reported improvements in LLM-based GER. This study investigates LLM-based GER for low-resource Frisian. In addition to a public corpus, we construct and use a Frisian offline dataset with non-public texts for evaluation to control for potential data contamination. Results show that GER improves ASR performance in most settings, with the best GPT-5.1 results surpassing oracle WERs. Comparable gains on the offline dataset indicate that improvements reflect true correction ability. We further provide a detailed error analysis revealing model correction patterns.
arXiv:2605.18831v1 Announce Type: cross
Abstract: Cold-chain storage limits access to insulin for hundreds of millions of people; a thermally protective patch polymer could help, but the design space is too large for exhaustive experiment. Starting from that problem, we narrow to an agentic workflow: a large language model (LLM) calls physics-based tools through the Model Context Protocol (MCP), searching the discrete PSMILES space under a budget of OpenMM Packmol-matrix evaluations. The LLM acts as an implicit acquisition function conditioned on a persistent "discovery world": hypotheses, literature claims, and simulation outcomes updated each iteration. Under matched oracle budgets, the best autonomous campaign reaches an insulin-polymer interaction energy of -2263 kJ/mol, outperforming reinforcement-learning baselines by 68% and Bayesian optimization by 19%. Three independent campaigns converge on one structural motif (dense hydrogen-bond donors and acceptors per repeat unit) while physics checks reject infeasible packings and name-structure mismatches before they steer the next step. The science stage is CPU-bound and runs on commodity hardware. More broadly, the same architecture and workflow designed here applies to other protein-stabilization tasks whenever a tractable screening oracle is available.
arXiv:2605.19726v1 Announce Type: new
Abstract: Diffusion Language Models (DLMs) enable globally coherent, bidirectional, and controllable text generation, offering advantages over traditional autoregressive LLMs, while scaling to ultra-long sequences remains costly. Many existing block-sparse attention methods select blocks by fixed sampling patterns over the high-resolution attention space, such as tail regions or anti-diagonal stripes. Such prior-driven sampling can miss salient tokens and introduce instability under distribution shifts. In this paper, we propose the Block Approximate Sparse Attention framework (BA-Att) with block-wise pre-downsampled operation, which identifies informative regions within a compact downsampled space, avoiding reliance on brittle positional priors. To analyze its theoretical behavior, we define an oracle post-downsample attention map and formalize the approximation error between pre- and post-downsample schemes. Based on this insight, we introduce a lightweight norm-sorting module and a covariance-compensated correction that approximates full covariance using diagonal QK variances, reducing computational complexity. Extensive experiments show that our operator achieves up to 6.95x acceleration over FlashAttention in attention computation, and maintains near full-attention performance at 50% sparsity across language models, multimodal language models, and video generation models, demonstrating strong efficiency and generalization.
arXiv:2605.19727v1 Announce Type: new
Abstract: Existing 3D foundation models typically align point clouds to frozen vision-language spaces like CLIP, which achieve strong cross-modal retrieval by compressing 3D shape into a global vector. However, this global-only alignment cannot establish fine-grained pixel-to-point correspondence. To solve this, we present Tango3D, a foundation model that unifies dense correspondence and global retrieval. We use a geometry-aware 2D visual backbone and a pretrained 3D VAE to encode images into 2D patches and point clouds into 3D tokens. These are mapped into a single shared space to achieve both local pixel-to-point alignment and global semantic alignment. To stabilize the joint learning of dense and global objectives, we introduce a three-stage progressive training strategy. Experiments show our model successfully achieves object-level pixel-to-point alignment while maintaining competitive global retrieval, a joint capability not offered by existing 3D foundation models. By establishing a fine-grained alignment feature space, Tango3D injects rich semantics into purely geometric 3D tokens, paving the way for a wide range of dense 3D downstream tasks.
arXiv:2605.19750v1 Announce Type: new
Abstract: Visual autoregressive (VAR) models have recently emerged as an efficient paradigm for text-to-image generation. Despite their strong generative capability, existing VAR-based personalization methods remain limited to static settings, failing to accommodate evolving user demands. In particular, sequential concept learning leads to severe catastrophic forgetting, while multi-concept synthesis often suffers from feature entanglement and attribute inconsistency. In this work, we present the first systematic study of continual personalized generation in VAR models. We identify two key challenges: (i) preserving previously learned concepts during sequential customization, and (ii) composing multiple personalized concepts in a controllable manner. To address these issues, we propose a unified framework with two core components. For continual single-concept learning, we introduce Gradient-based Concept Neuron Selection (GCNS), which identifies concept-relevant neurons and constrains only conflicting parameters across tasks, effectively mitigating forgetting without additional model expansion. For multi-concept synthesis, we propose a context-aware composition strategy that performs multi-branch feature modeling and localized cross-attention fusion guided by spatial conditions, enabling precise and disentangled concept composition. Extensive experiments demonstrate that our method significantly improves performance in long-sequence continual personalization while achieving superior results in multi-concept image synthesis compared to existing baselines. These findings highlight the potential of VAR models for scalable and controllable personalized generation.
arXiv:2605.19762v1 Announce Type: new
Abstract: Code has become a standard component of modern foundation language model (LM) training, yet its role beyond programming remains unclear. We revisit the claim that code improves reasoning through controlled pretraining experiments on a 10T-token corpus with fine-grained domain separation. Our findings are threefold. First, when code is restricted to standalone executable programs and Code-NL data are controlled for, code substantially improves programming ability but does not act as a general reasoning enhancer; instead, it competes with knowledge-intensive tasks, especially complex mathematical reasoning. Second, the reasoning gains often attributed to code are better explained by cross-domain structured reasoning traces, such as code-text and math-text mixtures, rather than by executable code alone. Third, increasing the density of structured math-domain samples within a fixed math budget yields substantial gains on difficult mathematical reasoning while largely preserving programming performance, suggesting that cognitive scaffolds offer a targeted way to mitigate cross-domain trade-offs. Finally, routing analyses show that data-composition effects are reflected in expert-activation patterns, providing mechanism-level evidence for competitive and synergistic interactions across domains. Our results clarify which data characteristics transfer across capability dimensions and point to more precise data-centric optimization strategies.
arXiv:2605.19837v1 Announce Type: new
Abstract: Adverse weather (rain, fog, sand, and snow) degrades camera-based object detection in autonomous vehicles. Existing enhancement-then-detect approaches stall the safety-critical perception loop, violating hard real-time requirements. Progress on this problem is also constrained by an under-recognized evaluation ceiling: ground truth annotated on degraded images cannot credit a detector that recovers objects the annotators themselves could not see, so a genuinely useful enhancement can register as a near-flat F1 gain. This paper presents CADENet (Condition-Adaptive Asynchronous Dual-stream Enhancement Network), a training-free three-thread system: Thread S (YOLOv11n) delivers detections at full frame rate with zero added latency; Thread Q applies condition-adaptive enhancement (CAPE) and fuses results via entropy-guided NMS (EG-NMS) without blocking Thread S; Thread E provides CLIP zero-shot weather classification, so new weather categories require only a new text prompt, with no labeled data and no retraining. Evaluated on 1327 DAWN images (YOLOv11m, IoU = 0.5, confidence = 0.25), CADENet achieves Recall = 0.0103 (micro), F1 = 0.0230 on snow, and F1 = 0.0038 on rain. We formalize the annotation completeness bias on DAWN-class data, so the reported F1 values are lower bounds on the true gain; recall is the annotation-gap-immune headline metric. Thread S sustains approximately 44 FPS regardless of enhancement load. No model retraining or additional sensor hardware is required.
arXiv:2605.19851v1 Announce Type: new
Abstract: Multi-photon dressing and interference in atomic systems is a key to several cutting edge technologies like Rydberg atom radio frequency sensors, clocks and magnetometers because it enables the engineering of atomic properties. Rydberg atom sensors are attracting significant interest because they can be used for applications where it is difficult or impossible to use conventional antennas, opening a number of new opportunities in fields like communications, test and measurement and radar. To date, radio frequency field amplitude detection is well-established in Rydberg electrometry. Phase detection, which is crucial for encoding radio frequency signals, typically requires an external heterodyning field or an atomic closed-loop interferometer. The heterodyne method compromises the intrinsic transparency of the sensor to the radio frequency wave and its inherently broad carrier bandwidth, in addition to increasing its complexity by introducing a local oscillator. In prior theoretical work, aimed at overcoming the disadvantages of the heterodyne method, we theoretically investigated the possibility of using the oscillatory dynamics of an all-optical five-level closed loop to sense the phase and amplitude of the target radio frequency fields. In this work, we experimentally demonstrate the scheme. We determine the coherence time of the loop to be on the order of ms and show that in-phase and quadrature signals can be extracted from a radio frequency signal.
arXiv:2605.19286v1 Announce Type: new
Abstract: Prescribed wall heat flux provides an active route for controlling rarefied micro-nozzle flows, but its effect is governed by the coupled wall--bulk thermal response rather than by the imposed flux alone. This work uses direct simulation Monte Carlo (DSMC) simulations to study nitrogen flow in a converging--diverging micro-nozzle with cooling, adiabatic, and heating applied on the diverging wall. The imposed heat flux is scaled by the inlet kinetic-energy flux, $E=0.5\rho_i U_i^3$, giving $Q_w/E$ from $-10.5\%$ to $97.3\%$; this range spans moderate cooling, weak-to-intermediate heating, and a near-unity thermal-forcing regime. Wall and mass-flux-weighted bulk temperature profiles, film-temperature-based Nusselt and local-viscosity Brinkman-type diagnostics, gradient-length Knudsen indicators, mass-flux thickness, thrust decomposition, and proper orthogonal decomposition (POD) of signed numerical schlieren are analyzed. The results show that heating creates strong wall--bulk stratification: the wall temperature exceeds five times the inlet value, while the bulk temperature responds more gradually. Cooling cases contain locations where $T_w-T_b$ changes sign, making the local Nusselt-type response singular; the raw singular behavior is retained for diagnosis and a validity mask is used only for comparative plotting. Heating contracts the effective mass-carrying core, increasing aerodynamic blockage and reducing mass flow rate. However, strong heating increases the specific impulse from $156$ s to $201$ s because thermal and pressure-thrust augmentation outweigh the mass-flow penalty. The internal compression feature evolves into a finite viscous--thermal compression zone, and its heat-flux-parametric response remains low-dimensional, with the first two POD modes capturing more than $97\%$ of the fluctuation energy.
arXiv:2407.13193v4 Announce Type: replace
Abstract: Large language models (LLMs) have achieved strong empirical performance in various fields, benefiting from their huge amount of parameters that store knowledge. However, LLMs still suffer from several key issues, such as hallucination problems, knowledge update issues, and lacking domain-specific expertise. The appearance of retrieval-augmented generation (RAG), which leverages an external knowledge base to augment LLMs, mitigates these limitations. This paper presents a systematic review of RAG techniques for natural language processing (NLP), with a focus on retrievers and retrieval fusions. We introduce a novel taxonomy of retrieval fusions, such as query-based, logits-based, latent, and parametric fusion, and provide structured comparisons across accessibility, efficiency, and use cases. The paper further examines RAG applications across diverse NLP tasks, discusses evaluation methodologies and benchmark limitations, and analyzes training paradigms with and without knowledge base updates. Finally, we explore industrial deployment considerations and identify emerging challenges and future directions, including security, efficiency, and graph-based retrieval.
arXiv:2409.01949v3 Announce Type: replace
Abstract: Domain-decomposed variants of physics-informed neural networks (PINNs) such as finite basis PINNs (FBPINNs) mitigate some of PINNs' issues like slow convergence and spectral bias through localisation, but still rely on iterative nonlinear optimisation within each subdomain. In this work, we propose a hybrid approach that combines multilevel domain decomposition and partition-of-unity constructions with random feature models, yielding a method referred to as multilevel ELM-FBPINN. By replacing trainable subdomain networks with extreme learning machines, the resulting formulation eliminates backpropagation entirely and reduces training to a structured linear least-squares problem. We provide a systematic numerical study comparing ELM-FBPINNs and multilevel ELM-FBPINNs with standard PINNs and FBPINNs on representative benchmark problems, demonstrating that ELM-FBPINNs and multilevel ELM-FBPINNs achieve competitive accuracy while significantly accelerating convergence and improving robustness with respect to architectural and optimisation parameters. Through ablation studies, we further clarify the distinct roles of domain decomposition and random feature enrichment in controlling expressivity, conditioning, and scalability.
arXiv:2508.16208v2 Announce Type: replace
Abstract: The physics of capacitively coupled plasma (CCP) discharges is investigated in a mildly magnetized regime, defined by $1 \le f_{ce}/f_{rf} < 2$, where $f_{ce}$ and $f_{rf}$ denote the electron cyclotron frequency and the applied radio-frequency (RF), respectively. A distinctive feature of this regime is the excitation of electron Bernstein waves (EBWs) that propagate into the bulk plasma. As the applied magnetic field increases, notable changes in the discharge characteristics occur, with EBWs observed to propagate along the plasma density gradient inside the bulk. The underlying physics of CCP operation in this regime is analyzed in detail using particle-in-cell Monte Carlo collisions (PIC-MCC) simulations.
arXiv:2605.19901v1 Announce Type: new
Abstract: Background: Large Language Models (LLMs) are increasingly used for code generation. However, their ability to generate multi-class projects that require object-oriented design (OOD) remains unclear, especially relative to projects developed with human involvement. Aims: The primary objective of this study is to compare OOD quality in projects from three authorship conditions: PreAI (human-involved projects produced before widespread LLM use), PostAI (human-involved projects produced after widespread LLM use), and PureAI (projects generated end-to-end by contemporary LLMs). Method: We conducted a comparative case study on a postgraduate Java assignment. Two offerings of the same assignment were selected as the PreAI and PostAI datasets. PureAI projects were generated using three contemporary LLMs. We analyzed OOD quality using project-level OOD metrics, code smell density, and domain modeling. Results: Relative to human-involved projects, PureAI projects show lower code smell density and generally appear simpler in terms of total size, complexity, and coupling. However, this is consistent with oversimplification, as it is associated with missing abstractions and weaker responsibility separation. PostAI is closer to PureAI than PreAI on many OOD measures and also shows tendencies toward oversimplification. Conclusions: Our findings indicate that appropriate human guidance on object-oriented decomposition and responsibility assignment remains important when LLMs are used for object-oriented design.
arXiv:2605.19902v1 Announce Type: new
Abstract: Predicting protein-ligand binding affinity remains intractable for multi-domain proteins, where inter-domain dynamics govern molecular recognition. Existing geometric deep learning methods typically treat proteins as monolithic static graphs, suffering from rigid-body assumptions and aleatoric noise in flexible regions. To address this, we introduced HCLBind, a self-supervised framework that decouples geometric representation learning from affinity regression. HCLBind leverages a general-to-specific pre-training paradigm on the Q-BioLiP database to learn a robust physical grammar of binding. We propose a novel hierarchical decoy strategy: the model learns local physicochemical constraints through protein coordinate perturbation in single-domain proteins and global conformational geometry through inter-domain rotation in multi-domain complexes. Our hybrid architecture integrates a domain-gated graph attention network and cross-modal attention to explicitly prioritize domain interfaces. Furthermore, we employ LoRA on protein and ligand foundation models, ensuring efficient optimization while preserving evolutionary knowledge. Experiments on PDBBind demonstrate that HCLBind effectively learns discriminative interface features and provides robust uncertainty estimation, overcoming the limitations of standard supervised learning. The code is available at https://github.com/jiankliu/HCLBind.
arXiv:2605.19931v1 Announce Type: new
Abstract: Estimating forest aboveground biomass (AGB) from Earth observation combines two structurally incompatible label sources: spaceborne lidar provides canopy structure at millions of locations but no biomass estimate, and ground-based plots provide biomass at thousands of biased locations but no metrics of structure. No single training sample carries labels for all target variables, plot labels are missing not at random (MNAR), and biomass is linked to the structural variables by known but biome-specific allometric laws. We formalise this as multi-task dense regression under heterogeneous disjoint partial supervision with MNAR labels and inter-task physical constraints, and propose StruMPL to address it jointly. A shared encoder feeds per-variable regression, imputation, and propensity heads for spatial MNAR correction, and a learnable physics module that evaluates the inter-task constraint on the model's own predictions at every pixel. The supervised loss uses an Augmented IPW (AIPW) pseudo-outcome with stop-gradients on the propensity and on the imputation baseline; we show analytically and empirically that both are necessary for joint optimisation to recover IPW-weighted stationary points while keeping the loss bounded. On two ecologically distinct biomes, StruMPL outperforms ablation variants and the closest published method on AGB RMSE and bias, with a stratified analysis showing AIPW reduces high-AGB bias by ~54%.
arXiv:2605.19944v1 Announce Type: new
Abstract: While empirical scaling laws for LLM reasoning are well-documented, the theoretical mechanisms governing out-of-distribution (OOD) generalization remain elusive. We formalize reasoning via optimal transport, projecting discrete trajectories into a continuous metric space to quantify domain shifts using the Wasserstein-1 distance. Invoking Kantorovich duality, we bound OOD generalization via architectural Lipschitz continuity and functional approximation limits. This exposes two primary constraints. First, position-dependent attention (e.g., Absolute Positional Encoding) fails to preserve shift invariance, yielding an $\Omega(1)$ Lipschitz constant and expected risk, whereas shift-invariant mechanisms (e.g., Rotary Embeddings) preserve equivariance and bound the error. Second, by mapping sequential backtracking to a Dyck-$k$ language, we establish a strict circuit depth lower bound for $\text{TC}^0$ Transformers. Scaling physical layer depth is necessary to avert representation collapse -- a constraint that scaling representation width cannot bypass due to irreducible approximation bounds in Barron spaces. Evaluations across 54 Transformer configurations on combinatorial search corroborate these bounds, demonstrating that generalization risk degrades monotonically with the Wasserstein domain shift.
arXiv:2605.19950v1 Announce Type: new
Abstract: Humans infer emotions by integrating observed multimodal cues with expectations about how affective states may unfold. Existing multimodal large language models (MLLMs), however, often treat emotion recognition as static fusion over complete audiovisual-text inputs, leaving affective dynamics implicit. We propose AffectVerse, a Qwen2.5-Omni-based model equipped with an Emotion World Module (EWM), an action-free representation-level module for short-horizon latent affective prediction. \rev{EWM contains three modules: 1) Cross-Modal Temporal Imagination predicts future video/audio representations from past tokens with multi-step rollout. 2) MAMA(Modality-Aware Multi-step Attention) Belief Aggregation compresses imagined tokens into modality-aware belief tokens. 3) Belief Injection inserts these belief tokens into the LLM for affective reasoning.} AffectVerse uses future prediction as a past-conditioned self-supervised signal: it does not replace modeling observed history or require unseen signals at inference, but forces the current belief state to encode transition cues that are predictive of subsequent affective change. Across nine benchmarks, AffectVerse improves at least 2.57\% over other models, while controlled ablations show additive gains from temporal imagination, cross-modal rollout, and belief aggregation. These results suggest predictive belief-state modeling is a practical alternative for affective computing.
arXiv:2602.04381v2 Announce Type: replace
Abstract: Real-time polyp segmentation is essential for early colorectal cancer detection, yet clinical deployment remains blocked by GPU dependency. We introduce the UltraSeg family, a set of CPU-native segmentation models operating below 0.3M parameters. UltraSeg-108K (0.108M) establishes the extreme-compression frontier, while UltraSeg-130K (0.130M) integrates cross-layer lightweight fusion for enhanced multi-center generalization. The architecture replaces parameter-heavy components with grouped multi-rate dilated convolutions and attention-gated cross-layer fusion, achieving real-time throughput on a single CPU core (exceeding 50 FPS at 256*256 and 30 FPS at 352*352) without sacrificing clinical-grade accuracy. Evaluated on seven public datasets, UltraSeg-130K attains Dice scores exceeding 0.8 at both resolutions, substantially outperforming all existing sub-0.3M competitors. Notably, it approaches or exceeds UNet-Medium (7.76M parameters) on zero-shot external validations while using only 1.7% of its parameters, establishing the first strong baseline for CPU-native real-time polyp segmentation. When scaled to 4.38M parameters, UltraSeg achieves accuracy competitive with heavyweight state-of-the-art models while maintaining an order-of-magnitude parameter advantage, demonstrating that the proposed design principles yield intrinsic representational gains across the entire efficiency spectrum. By delivering the first clinically deployable, CPU-native real-time solution, this work provides an immediately usable tool for resource-limited settings and a reproducible blueprint for real-time medical AI beyond endoscopy. Source code is publicly available.
arXiv:2605.19951v1 Announce Type: new
Abstract: We present a novel parallel implementation for large-scale three-dimensional electromagnetic inversion based on a Gauss-Newton framework combined with a rational near-best approximation of the matrix exponential for transient simulations. The method employs parallel direct solvers for the shifted linear systems arising from the partial fraction representation of the rational approximation and demonstrates efficient parallel execution on a shared-memory architecture using MPI. A key property of the approach is that the time dependence is entirely contained in the residuals of the employed rational functions, such that the computation of forward responses and sensitivities becomes effectively independent of the number of desired observation times. Model regularization is done with smoothness constraints, formulated with Raviart-Thomas elements. The linearized inverse problems are solved using LSQR, using an implicit parallel Jacobian operator. Numerical experiments demonstrate the successful recovery of a synthetic 3-D conductivity structure with approximately 700,000 degrees of freedom. The study further discusses computational bottlenecks related to memory consumption and shared-memory scalability arising from the simultaneous storage of multiple sparse matrix factorizations. Possible improvements based on preconditioned iterative solvers and distributed high-performance computing architectures are outlined. The implementation in the Julia programming language is released as open-source software to support reproducible research and further development by the geophysical inversion community.
arXiv:2605.19952v1 Announce Type: new
Abstract: To enable reliable long-term interaction, LLM agents require a memory system that can faithfully store, efficiently retrieve, and deeply reason over accumulated dialogue history. Most existing methods adopt an extracted fact based paradigm: handcrafted static prompts compress raw dialogues into atomic facts, which are then stored, matched, and injected into downstream reasoning. Nevertheless, such fact-centric designs inevitably discard fine-grained details in original dialogues and fail to support deep reasoning over scattered isolated facts. Moreover, static prompts cannot maintain consistent extraction granularity across diverse dialogue styles. To address these limitations, we propose TriMem, which maintains three coexisting representation granularities, including raw dialogue segments anchored by source identifiers for storage fidelity, extracted atomic facts for efficient memory retrieval, synthesized profiles that aggregate dispersed facts into holistic semantic understanding for deep reasoning. We further adopt TextGrad-based prompt optimization, which iteratively refines extraction and profiling prompts via response quality feedback, achieving lifelong evolution without any parameter updating. Extensive experiments on LoCoMo and PerLTQA across multiple LLM backbones demonstrate that TriMem consistently outperforms strong memory baselines. The code is available at https://TMLR-TriMem.github.io .