arXiv:2605.29836v1 Announce Type: new
Abstract: Despite strong average-case performance, deep learning models often exhibit systematic errors on specific population groups, known as error slices. Identifying these groups and the root causes of their failures is critical for model debugging and bias mitigation. However, existing error Slice Discovery Methods (SDMs) typically generate explanations disconnected from the model's inference process, thus only approximating the underlying error source and may be inaccurate.
We address this limitation by leveraging Concept Bottleneck Models (CBMs), whose predictions are directly dependent on human-understandable semantic concepts. Since downstream task failures in CBMs commonly arise from concept mispredictions, concept representations provide a strong candidate for error slice identification, offering fine-grained explanations directly linked to the error source. Building on this insight, we introduce CB-SLICE, a concept-based SDM that groups samples with shared concept prediction failures and identifies the keyword concepts most responsible for each slice's failure mode. Across multiple benchmarks, we show that CB-SLICE outperforms state-of-the-art methods in uncovering well-known biases while providing richer and more faithful explanations of model errors.
Science Journals
arXiv:2605.29214v1 Announce Type: new
Abstract: Sensitive mid-infrared (MIR) detection is highly demanded in various applications, ranging from remote sensing, infrared surveillance, environmental monitoring to industrial inspection. Among others, upconversion infrared detectors have recently attracted increasing attention due to the advantageous features of high sensitivity, fast response, and room-temperature operation. However, it remains challenging to realize high-performance passive MIR sensing due to the stringent requirement of high-power continuous-wave pumping. Here, we propose and implement a high-efficiency and low-noise MIR upconversion detection system based on pumping enhancement via a low-loss optical cavity. Specifically, a single-longitudinal-mode pump at 1064 nm is significantly enhanced by a factor of 36, thus allowing for a peak conversion efficiency of up to 22\% at an intra-cavity average power of 55 W. The corresponding noise equivalent power is achieved as low as 0.3 fW/Hz$^{1/2}$, which indicates at least a ten-fold improvement over previous results. Notably, the involved single-frequency pumping would facilitate high-fidelity spectral mapping, which is particularly attractive for high-precision MIR upconversion spectroscopy in photon-starved scenarios.
arXiv:2605.28866v1 Announce Type: new
Abstract: Token-based time series large language models (TS-LLMs) have emerged as a promising direction for time series analysis and reasoning. However, prior studies largely overlook the inherent continuity and ordinality of time series tokens, which substantially limits model performance. In this paper, we argue that preserving these properties in time series token embeddings is crucial for the effectiveness of token-based TS-LLMs. To this end, we propose COM (Continuity and Ordinality Matter), a continuity- and ordinality-aware strategy that integrates geometric constraints into both the initialization and training stages. Empirical results on multiple time series analysis benchmarks demonstrate that COM consistently improves the performance of token-based TS-LLMs, achieving competitive results and strong generalizability. Code is available at https://anonymous.4open.science/r/COM .
arXiv:2605.28868v1 Announce Type: new
Abstract: Metagenomic taxonomic annotation aims to identify the microbial origins of DNA fragments in environmental samples. Traditional methods that rely on sequence similarity are often constrained by the high microbial diversity and the incompleteness of reference databases, which has motivated the development of learning approaches such as Taxometer that perform post hoc correction to learn more informative metagenomic sequence representations. However, these methods typically rely on labels derived from similarity search tools during training, which inevitably introduces noise that can impair representation learning and degrade classification performance. To address this issue, we propose TaxDistill, a knowledge distillation framework for metagenomic classification. We introduce GenomeOcean, a 500M parameter genomic foundation model, as the teacher network to extract deep semantic features and generate soft labels based on confidence. By distilling this soft label information into a lightweight student network, TaxDistill effectively reduces the label noise introduced by initial retrieval tools. Comprehensive experiments on seven diverse CAMI2 datasets demonstrate that TaxDistill outperforms existing baselines in most scenarios. For instance, on the Gastrointestinal dataset, it improves the F1 score of MMseqs2 from 0.763 to 0.941, outperforming the Taxometer baseline. Overall, TaxDistill provides a reliable method for label correction in complex metagenomic analysis.
arXiv:2605.29575v1 Announce Type: new
Abstract: Rapid identification of damaged buildings after natural disasters or on war areas is crucial to support emergency response and prioritize interventions. Earth Observation constellations provide timely, large-scale coverage, but actionable information is often delayed by data downlink constraints, on-ground processing, and human interpretation. Reducing this latency is essential to improve decision-making responsiveness. In this work, we propose an original AI-based system that enables object-level building damage assessment (localization and damage classification) directly onboard satellites from pre-disaster and post-disaster highresolution optical imagery. Available pre-disaster images are encoded on ground into compact latent representations, transmitted to the satellite, and compared on-board with newly acquired post-event observations. Leveraging AI interpretation capabilities and increasing processing capabilities on-board satellites, the proposed design enables processing directly at the data source, reducing the amount of information to be downlinked while preserving task-relevant content and improving overall system responsivity. We explore the design space through a systematic benchmark of onboard-compatible variants, analyzing the impact of siamese processing, cross-attention, latent-space compression, and robustness-oriented data augmentation. Experiments on xBD dataset demonstrate reliable and robust damage assessment under misalignment, with minimal performance degradation under strong compression.
arXiv:2605.29318v1 Announce Type: new
Abstract: We present a novel formulation for mesh-free, reduced-order simulation of deformable hyperelastic objects. Existing work in reduced-order elastodynamic simulation represents the input geometry by either meshes, which can be difficult to obtain due to challenges in scanning and triangulating complex shapes, or by neural fields that require per-shape optimization. We propose to adopt a Reproducing Kernel Particle Method (RKPM) representation, which enables the construction of reduced-order skinning weights by solving a generalized eigensystem on the Hessian matrix of the elastic energy. We demonstrate that this formulation not only leads to a 40x training speedup compared with the per-shape optimization of neural fields, but also achieves lower simulation error when evaluated against the converged results of finite element method. We show our simulation results on a wide variety of objects in different representations including meshes and Gaussian splats, as well as the application of our method in the downstream task of robot simulation.
arXiv:2605.28869v1 Announce Type: new
Abstract: Multimodal learning often suffers from modality imbalance, where modalities that converge faster dominate optimization while others remain undertrained. Existing approaches typically mitigate this issue by strengthening the weak modality or adjusting optimization gradients. However, such strategies mainly compensate for optimization rate discrepancies, often at the expense of the strong modality's optimization capacity, without analyzing how these discrepancies arise at the modality level. Based on theoretical insights and empirical observations, we argue that the discrepancy of learning pace arises from differences in the mapping difficulty between modality-specific feature space and the shared label space. To address this issue, we propose Balanced Multimodal Label Reshaping (BMLR), the first method that promotes multimodal balance from the label-side design. BMLR reshapes the cross-modal label space to equalize mapping difficulty across modalities, thereby facilitating modality interaction and injecting richer inter-class information into each modality. Extensive experiments across multiple architectures demonstrate that BMLR consistently improves multimodal performance and exhibits strong compatibility with diverse model designs. The source code will be released soon.
arXiv:2605.28851v1 Announce Type: cross
Abstract: The martian atmosphere hosts dynamical phenomena ranging from planet-encircling dust storms to mesoscale orographic clouds and nocturnal low-level jets. General circulation model show capability to simulate these phenomena, but is computationally expensive at resolution needed to resolve mesoscale features. While assimilation of satellite remote sensing observation enable forecasting capabilities using such models, observation record is often sparse, short and fragmented across instrument generators. These constraints motivate the development of a data-driven foundation model for the Martian atmosphere.
Foundation models live in a complex design landscape. There is an interplay between the available data, the physics of the underlying processes and corresponding developments in AI. Even though the idea of a foundation model is to address multiple use cases in a data- and compute-efficient manner, it is important to have a clear picture what applications can sensibly addressed by a single model.
The purpose of this paper is to elucidate this design landscape. We discuss available data ranging from atmospheric retrievals to reanalysis datasets as well as existing physical models. Moreover, we identify a wide range of candidate downstream applications. Finally, we consider relevant recent developments in artificial intelligence (AI) that can be leveraged in this context. Here, we put a particular emphasis on AI models for atmospheric physics, data-driven approaches to data assimilation as well as methods to work in a limited data setting.
arXiv:2605.28884v1 Announce Type: new
Abstract: We study the observation congruences induced by rational polyhedral cones on vector-valued quantitative languages. The extreme rays of the dual cone define intrinsic covectors, and these covectors classify every incremental residual future by a finite sign cell: negative, tight, or positive along each extremal Farkas direction. The resulting carrier is the right-stable carrier of this cone-induced observation family, whose source is canonical: the restricted covector geometry of the order cone on the residual span of the language. We organize this construction through an observation-refinement correspondence, a cone-refinement calculus, and a separation between the qualitative conic observation quotient and the numerical residual carrier needed for potential certificates. A bounded-horizon fragment is fully computable by enumeration of accumulated futures, and reproducible evaluation runs show how the conic layer detects qualitative obstruction cells before numerical refinement.
arXiv:2605.28867v1 Announce Type: new
Abstract: Generating high-quality time-series data is challenging because real-world signals often exhibit multimodal patterns and multiscale dynamics, including oscillations and high-frequency variations. Flow Matching (FM) offers an efficient alternative to diffusion models, but practical implementations typically rely on a single finite-capacity global vector-field estimator. In such heterogeneous temporal distributions, distinct regimes may pass through nearby flow states while requiring incompatible conditional velocities. A monolithic estimator trained with the standard $\ell_2$ velocity-matching objective may therefore learn an overly smoothed approximation of the local transport field. This estimator-level smoothing can attenuate branch-specific dynamics, leading to spectral distortion and poor mode coverage. To address this, we propose PrismFlow, a new FM method with Koopman-inspired dynamical experts. Each expert learns residual corrections in a latent space where local nonlinear temporal evolution can be approximated by linear transitions. We further propose a confidence-aware Winner-Take-All (WTA) objective that updates only the expert best aligned with each sample while masking gradients to the others, encouraging mode-specific specialization. During sampling, the selected expert adds a residual dynamical correction to the global transport field, preserving FM stability while recovering fine-grained and high-frequency temporal structures. Across various benchmarks, PrismFlow effectively mitigates the spectral contraction in standard FM and achieves state-of-the-art performance, with a 15.6% gain in Context-FID and a 38.6% improvement in Discriminative Score, while remaining robust in low-data settings and effective for forecasting and imputation.
arXiv:2605.29250v1 Announce Type: new
Abstract: Real-world information needs require access to structurally diverse knowledge sources, from unstructured text and relational tables to knowledge graphs and property graphs. Existing retrievers, however, operate over one source at a time under a fixed query language, leaving the broader landscape of available knowledge fragmented behind incompatible interfaces. A natural attempt at unification would collapse these sources into a shared space, but this erases the structural affordances (such as schemas, ontologies, compositional operators) that give each source its expressive power. Effective retrieval over diverse knowledge, therefore, requires not homogenization but an overarching layer that meets each source on its own terms. To achieve this, we present OmniRetrieval, a framework that takes any natural-language query, identifies appropriate knowledge sources, and dispatches source-native queries to their native execution engines. Across an extensive benchmark spanning 13 datasets and 309 distinct knowledge bases over text, relational, and graph-structured sources, OmniRetrieval exceeds single-source baselines, demonstrating that it can serve as a general-purpose interface to the heterogeneous sources while preserving the structural distinctions that make each source valuable.
arXiv:2605.29261v1 Announce Type: new
Abstract: Asymptotic analysis provides powerful insights into physical systems by examining their behavior in limiting cases. This paper explores how extending this advanced methodology to high school physics education can deepen conceptual understanding of fundamental topics. Through two carefully selected case studies -- multi-ball collisions and internal resistance in circuits -- we demonstrate how asymptotic approaches offer: Intuitive physical interpretations beyond standard derivations Resolution of conceptual paradoxes through limit analysis Connections between elementary and advanced physics concepts. Our analysis reveals that asymptotic methods help students develop stronger physical intuition while preparing them for more advanced studies. By examining boundary behaviors in collision dynamics and circuit theory, we show how these techniques transform abstract equations into tangible physical understanding, suggesting valuable applications across the high school physics curriculum.
arXiv:2605.29956v1 Announce Type: new
Abstract: Retrieval Augmented Generation (RAG) improves the question answering capabilities of Large Language Models (LLMs) by incorporating external knowledge and has recently been extended to multimodal settings through Vision-Language Models (VLMs) that integrate visual and textual information. Despite these advances, generated answers can still be incorrect or misleading. Uncertainty Quantification (UQ) methods aim to estimate the reliability of model outputs, but most existing approaches are designed for text-only models and perform poorly in multimodal RAG scenarios. A key challenge is capturing uncertainty arising from multiple stages of the pipeline, including retrieval, visual understanding, and generation. In this work, we show that modeling uncertainty using multimodal and retrieval-aware probability signals improves estimation in multimodal RAG systems. We introduce LeMUQ, a Learnable Multimodal UQ method that analyzes token probabilities under input modifications, such as removing modalities or retrieved context. By encoding these signals as probability tokens and processing them with a finetuned model, our approach captures interactions between modalities and retrieval. Experiments across datasets, retrievers, and VLMs show consistent improvements over baseline and finetuned UQ methods. Our proposed LeMUQ increases the AUROC metric by 3.8% on average. Additionally, our method shows strong generalization performance across different retrieval setups and datasets with mixed results when transferring across different VLMs. Our findings highlight the importance of modeling multimodal uncertainty and provide a step toward more reliable and safer multimodal RAG systems. Code is available on GitHub.
arXiv:2605.29301v1 Announce Type: new
Abstract: The Open Motion Planning Library (OMPL), first released in 2008, has become a cornerstone of the motion planning community, providing implementations of a wide range of state-of-the-art sampling-based algorithms. Over almost two decades of continuous development, we have steadily expanded the library with new planners, state spaces, and problem formulations. These additions range from asymptotically optimal and lazy planners to constrained motion planning and planning with temporal-logic goals. Building on this foundation, we introduce OMPL 2.0, a major evolution of the library that targets real-time motion planning through hardware acceleration and integrates seamlessly with modern AI research workflows. We also reflect on how OMPL and the field of motion planning have grown together over the years, and discuss the library's broader impact on the research community.
arXiv:2603.04314v2 Announce Type: replace
Abstract: Animal re-identification (ReID) faces critical challenges due to viewpoint variations, particularly in Aerial-Ground (AG-ReID) settings where models must match individuals across drastic elevation changes. However, existing datasets lack the precise angular annotations required to systematically analyze these geometric variations. To address this, we introduce the Multi-view Oriented Observation (MOO) dataset, a large-scale synthetic AG-ReID dataset of $1,000$ cattle individuals captured from $128$ uniformly sampled viewpoints ($128,000$ annotated images). Using this controlled dataset, we quantify the influence of elevation and identify a critical elevation threshold, above which models generalize significantly better to unseen views. Finally, we validate the transferability to real-world applications in both zero-shot and supervised settings, demonstrating performance gains across four real-world cattle datasets and confirming that synthetic geometric priors effectively bridge the domain gap. Collectively, this dataset and analysis lay the foundation for future model development in cross-view animal ReID. MOO is publicly available at https://github.com/TurtleSmoke/MOO.
arXiv:2605.28889v1 Announce Type: new
Abstract: Context distillation compresses contextual information into model parameters, yet existing methods often ignore how multiple distilled latent memories should be stored, retrieved, and safely activated in non-oracle settings. We formulate context distillation as a latent memory management problem. We distill each context into an independent LoRA adapter, forming a modular memory bank that enables explicit memory selection. Given a query, our framework retrieves candidate memories, routes the query to the most suitable adapter, and uses a Self-Gating mechanism to decide whether latent memory should be activated. To improve efficiency, we further introduce cache sharing to reduce management overhead during inference. Experiments show that our method substantially outperforms baselines with retrieval, while Self-Gating improves robustness by deactivate unnecessary latent memories.
arXiv:2605.29440v1 Announce Type: new
Abstract: Retrieval-augmented LLM agents increasingly rely on curated skill banks: collections of reusable textual principles that guide decision making on complex tasks. Existing approaches typically expand these banks in an append-only fashion, continuously adding new skills without removing redundant, outdated, or harmful ones, resulting in inefficient and poorly curated repositories. In this paper, we formulate the skill bank curation as a constrained multi-objective problem: a desirable bank must be useful for the agent, diverse in its content, and provide good coverage of the query distribution. To this end, we introduce SkillBrew, a multi-objective curation framework that formalizes skill bank curation as Pareto-aware optimization under a utility constraint, and solves it via a bi-level propose-then-verify loop. We evaluate our approach on two public benchmarks. Our findings suggest that treating skill banks as objects of principled curation, rather than ever-growing append-only logs, is an important step toward building self-improving LLM agents.
arXiv:2602.03582v3 Announce Type: replace
Abstract: Aerodynamic inverse design can improve vehicle and aircraft efficiency, but practical design rarely seeks performance alone: vehicle refinement must reduce drag while preserving visual features linked to design language, brand recognition and user perception. Traditional CFD-driven optimization is accurate but slow for broad exploration, and current learning-based methods are still largely performance-driven and lack a coherent target linking optimization, generation and visual consistency. Here we formulate visual preservation and aerodynamic improvement as one probability target. Designs consistent with a reference shape or view define a learned visual design distribution, which is reweighted by aerodynamic cost. Optimization then refines an initial geometry toward a low-cost, high-probability design, whereas guided generation samples lower-cost 3D candidates from the same input view. OpenFOAM evaluation shows that visual-feature-preserving optimization reduces vehicle drag by 5.8\% relative to the initial vehicle and reduces the best valid aircraft drag-to-lift objective by 28.8\% relative to the initial aircraft while preserving input visual features. For view-based generation, guidance reduces vehicle drag by 3.0\% and the aircraft drag-to-lift objective by 68.6\% relative to direct generation from the same view, while maintaining visual consistency. Wind-tunnel tests with 3D-printed vehicle prototypes provide an independent wake-level check, and controlled analyses explain the distributional mechanisms behind these results. This work provides a probabilistic foundation and practical route for visual-feature-preserving aerodynamic refinement and early-stage 3D design exploration.
arXiv:2605.30079v1 Announce Type: new
Abstract: This paper presents an extensible ns-3-based simulation framework for evaluating intent-based, semantics-aware control in Open RAN architectures. The framework integrates external Radio Access Network (RAN) Intelligent Controller (RIC) components and supports fine-grained control via internal distributed applications (dApps), enabling intent-based RAN orchestration across different timescales while maintaining standardized network behavior. As an illustrative use case, we implement an intent-based dApp for radio resource management (RRM) under realistic observability constraints. The scheduling problem is formulated using realistic key performance measurements (KPMs) available to dApps, together with a newly introduced Intent Satisfaction Score (ISS), which quantifies the delivery of intent-relevant information by combining distortion- and perception-oriented measures. Simulation results show that intent-based RRM can improve ISS while significantly reducing radio resource usage and computational overhead, at the cost of a moderate reduction in packet delivery ratio and throughput.
arXiv:2605.29254v1 Announce Type: new
Abstract: Symmetry is a central organizing principle in natural systems, yet its use as a unifying design strategy in robotics has largely remained limited to geometric form. We show that symmetry can instead be leveraged at the level of dynamic actuation capability. We introduce dynamic symmetry, the uniformity of a robot's attainable center-of-mass accelerations, and formalize it through a measure coined as dynamic isotropy. Across more than 1000 simulated morphologies, we found that higher dynamic symmetry consistently improved trajectory tracking, task success, robustness, resiliency, and energy efficiency, with the benefits becoming most pronounced as dynamic isotropy approached its theoretical limit. To study this regime systematically, we developed Argus, a family of spherical robots designed to explore the effects of increasing dynamic symmetry. Members of the Argus family vary in their actuation geometry and dynamic symmetry level while sharing a common architectural principle: radially oriented linear actuators that directly shape the robot's center-of-mass dynamics. Among them, we built a physical 20-leg Argus variant that achieved near-extreme dynamic isotropy and demonstrated orientation-invariant locomotion, agile traversal of cluttered and deformable terrain, rapid self-stabilization, and resilience to partial actuator failures. Its distributed sensing further enabled omnidirectional perception and object interaction during continuous motion. These results show that designing robots for symmetry not only in morphology but also in their attainable dynamics provides a powerful and general pathway toward agility, robustness, and multifunctionality in uncertain terrestrial and extraterrestrial environments.
arXiv:2605.28828v1 Announce Type: new
Abstract: Large Language Models (LLMs) achieve impressive performance across many tasks but remain prone to hallucination, especially in long-form generation where redundant retrieved contexts and lengthy reasoning chains amplify factual errors. Recent studies highlight a critical phenomenon: the closer key information appears to the model outputs, the higher the factual accuracy. However, existing retrieval-augmented language models (RALMs) lack effective mechanisms to ensure this proximity - external evidence is injected into reasoning via multi-turn retrieval, but this cannot ensure key information stays close to the outputs. We propose Micro-Macro Retrieval (M2R), a novel retrieve-while-generate framework to fill this gap. At the macro level, M2R retrieves coarse-grained evidence from external sources; at the micro level, it extracts essential results from a key information repository built during reasoning and reuses them while generating answers. This design directly addresses the key-information-to-output proximity bottleneck, effectively reducing hallucination in long-form tasks. M2R is trained with a curriculum learning-based reinforcement learning strategy using customized rule-based rewards, enabling stable acquisition of retrieval and grounding skills. Extensive experiments across different benchmarks demonstrate the effectiveness of M2R, especially in lengthy-context settings.
arXiv:2605.29144v1 Announce Type: new
Abstract: Robotics Wire Arc Additive Manufacturing (WAAM) is governed by complex and nonlinear process dynamics coupling thermal field to the build geometry. The process may be regarded as a multi-input/multi-output dynamical system with welding torch speed and wire feed rate as inputs and weld bead deposition height and width as outputs. In this paper, we use the input/output data to learn a data-driven model and use it for weld planning and control. We show that a simple recurrent neural network architecture and one-step-ahead predictive control can improve the process performance in terms of height and width consistency. To account for the changing thermal conditions during the printing process, we update the learning model using prediction error from the previous layer. This adaptation step further improves the prediction accuracy and controller performance. Experiments on a robotic WAAM testbed with integrated line-scanner feedback significant improvements in height and width consistency compared to constant input and static model baselines. The proposed learning and adaptation framework provides a practical pathway toward robust, data-driven regulation of additive manufacturing processes.
arXiv:2605.29598v1 Announce Type: new
Abstract: We present a high-order implicit-explicit discontinuous Galerkin (IMEX-DG) solver for the compressible Euler equations to account for rotational effects within a fully compressible atmospheric framework. Time integration follows a second-order additive Runge-Kutta scheme, treating stiff acoustic modes implicitly and advective terms explicitly. The solver is built on the deal.II finite element library, combining matrix-free operator evaluation, adaptive non-conforming meshes capabilities, and distributed-memory parallelism.
Two alternative treatments of the rotational and gravitational source terms within the solution strategy, based on nonlinear fixed-point iterations, are introduced and compared in terms of accuracy, robustness, and computational efficiency. A discrete analysis of the rotational operator is also carried out in order to derive a formulation suitable for efficient matrix-free implementation and to avoid inconsistent naive discretisations.
The proposed formulation is validated through convergence studies on rotating inertia-gravity wave benchmarks and further assessed in fully three-dimensional simulations of stratified flow over orography on both uniform and adaptive meshes. The numerical results show that the rotating IMEX-DG framework has the expected accuracy and stability properties while correctly capturing the asymmetry and wave structures induced by rotation in large-scale atmospheric flows.
arXiv:2605.29602v1 Announce Type: new
Abstract: Multi-modal Retrieval-Augmented Generation (MMRAG) has emerged as a powerful paradigm for enhancing Multimodal Large Language Models in knowledge-intensive question answering by integrating external visual, textual, and structural knowledge. However, existing MMRAG frameworks suffer from critical limitations, including noisy and irrelevant retrieval, cross-modal semantic misalignment, lack of adaptive reasoning, and incoherent generation across local and global contexts. We introduce \textbf{CogniVerse}, a novel MMRAG framework that addresses these challenges through a cognitive-inspired, mathematically rigorous approach. Drawing from human-like reasoning, CogniVerse integrates three synergistic components: (1) a Cognitive Reflection Module that dynamically assesses retrieval necessity and filters relevant multi-modal content, reducing noise and computational overhead; (2) a Multi-modal Retrieval Module that aligns embeddings in a Riemannian manifold using information geometry and refines knowledge graphs via spectral graph theory, ensuring precise and coherent retrieval; and (3) a Hierarchical Generation Module that employs an optimal transport-based loss to balance token-level accuracy and global semantic coherence. Extensive experiments demonstrate that CogniVerse significantly outperforms state-of-the-art systems in both accuracy and coherence, while reducing retrieval latency.
arXiv:2605.29385v1 Announce Type: new
Abstract: This paper studies closed-loop identification of linear periodically time-varying (LPTV) plants, with emphasis on open-loop unstable plants for which open-loop experiments are not practically available. The central contribution is an exact algebraic plant-extraction theorem for cycled closed-loop realizations: for square strictly proper plants and a controller path satisfying an invertibility condition, the cycled plant transfer matrix is recovered from a shared state-space realization of the stable closed-loop maps from the external reference to the plant output and to the control input, without state augmentation, and without requiring the recovered plant realization to be stable. Thus, the stability requirement for data generation is shifted from the open-loop plant to the internally stable closed-loop system. Building on this result, a closed-loop identification algorithm is constructed that takes the reference, output, and input signals as data, applies standard subspace identification to the cycled signals, performs the algebraic plant extraction, and recovers the LPTV plant state-space parameters via a coordinate transformation; the conditioning of the inverse controller path governs the reliability of the extraction step. Numerical examples demonstrate the recovery of stable and open-loop unstable SISO LPTV plants and validate a MIMO case through coordinate-invariant Markov-parameter comparisons.