arXiv:2606.01971v1 Announce Type: new
Abstract: The Compressed Baryonic Matter (CBM) experiment at the upcoming Facility for Antiproton and Ion Research (FAIR) is a high-rate fixed-target experiment designed to investigate nuclear matter at extreme baryon densities in relativistic nucleus-nucleus collisions. To enable high-statistics measurements of rare probes, CBM is designed to operate at event rates up to 10 MHz. This necessitates the development of fast and radiation-tolerant detectors, self-triggered front-end electronics, a free-streaming data acquisition architecture, and real-time event reconstruction capabilities. Prototype versions and pre-series productions of the CBM detector systems have been deployed in the mini-CBM demonstrator setup mCBM - an experimental precursor comprising sub-components of all major CBM systems, installed at the SIS18 facility of GSI/FAIR within the FAIR Phase-0 program. In 2024, Ni+Ni collisions at a kinetic beam energy of 1.93 AGeV and an average interaction rate of about 250 kHz were successfully recorded. This dataset enables a detailed evaluation of the operational performance of the detector systems as well as the complete CBM data chain, while the reconstruction of rare $\Lambda$ baryons serves as a natural benchmark. This paper presents the first results on $\Lambda$ signal reconstruction with the mCBM experiment, demonstrating the readiness of the detector technologies and the data chain for the upcoming full-scale CBM experiment.
Science Journals
arXiv:2606.01974v1 Announce Type: new
Abstract: Systems programming languages traditionally struggle with the tension between physical transparency and compile-time memory safety. C++ provides direct, zero-cost hardware access but lacks strict safety boundaries, whereas Rust guarantees safety at the cost of complex lifetime annotations and implicit dereferencing chains.
In this paper, we present Toka, a native systems programming language that establishes physical transparency in resource management via Explicit Resource Semantics. At the core of Toka's design is the Handle-Soul Duality (informally referred to as the Hat-Soul model), which cleanly dissociates pointer identities (Handles) from their underlying values (Souls) at the syntactic level. By enforcing that bare identifiers always represent values (Souls) and explicit sigils represent pointer handles, Toka eliminates the semantic ambiguity between rebind operations and value mutations. We detail Toka's resource morphology (supporting unique, shared, borrowed, and raw semantics), its lifetime checking mechanism, and its implementation of a prototype compiler. Our evaluation demonstrates that Toka achieves competitive runtime performance and minimal binary size while drastically reducing the cognitive overhead of lifetime annotations.
arXiv:2606.02038v1 Announce Type: new
Abstract: Reconstructing spatially continuous daily temperature fields from sparse observations is important for urban climate monitoring and heat-risk analysis, but practical deployments are limited by sensor budgets and spacing constraints. This study proposes an uncertainty-aware graph neural network (GNN) framework for reconstructing daily maximum temperature fields from sparse sensors while supporting distance-constrained sensor placement and probabilistic exceedance mapping. The model predicts both the temperature field and a spatially varying predictive uncertainty field using a graph-attention-based mean-residual architecture trained with a Gaussian negative log-likelihood. Sensor placement is addressed using a Proper Orthogonal Decomposition with QR factorization (POD-QR) strategy with a 4 km minimum inter-sensor distance constraint and is compared with random feasible placement and farthest-point sampling. The framework is evaluated over a Montreal-area polygon using Daymet v4.1 daily temperature data (1 km resolution) under a strict temporal hold-out protocol (training: 2020-2023; testing: 2024). Across sensor budgets (10-40 sensors), the proposed GNN consistently outperforms inverse distance weighting and ordinary kriging in RMSE and MAE on unobserved nodes. Sensor-placement effects are most pronounced at low budgets and diminish at higher budgets, with a practical saturation regime emerging around 30 sensors under the imposed spacing constraint. Probabilistic evaluation further shows improved uncertainty calibration with increasing sensor density and a better sharpness-calibration trade-off than kriging. These results support the proposed framework as an effective tool for uncertainty-aware temperature field reconstruction and decision-oriented heat-risk mapping.
arXiv:2606.02042v1 Announce Type: new
Abstract: Continual industrial anomaly detection with diffusion models suffers from historical normality prior drift and catastrophic forgetting. Existing continual diffusion methods preserve previous knowledge through replay or constrained optimization, but they lack an explicit mechanism for isolating and protecting category-specific normality priors during sequential adaptation. Although low-rank adaptation provides modular residual updates, standard LoRA neither freezes historical normality subspaces nor prevents new adapters from interfering with previous ones. To address this issue, we propose a normality-preserving continual anomaly detection framework based on two modules: History Frozen Orthogonal LoRA Bank (HF-OLB) and Hierarchical Novelty Adaptive Bank Growth module (HNABG). HF-OLB freezes both the pre-trained U-Net backbone and the learned LoRA banks, and constrains new task-specific normality residuals to the orthogonal complement of historical LoRA subspaces. HNABG further allocates layer-dependent residual capacity and expands the bank only when the residual normality novelty exceeds the expressive capacity of existing banks. Extensive experiments on MVTec and VisA demonstrate the effectiveness of the proposed method. On the challenging VisA 2x6 setting, our method achieves 83.6/91.8 image and pixel level A-AUROC with 3.8/3.9 FM, improving pixel level A-AUROC over the state of the art by 3.2 points while reducing pixel level FM by 1.3. These results show that our method effectively preserves historical normality priors in long horizon continual category sequences.
arXiv:2606.01663v1 Announce Type: new
Abstract: The coordination of heterogeneous autonomous agents in dynamic, adversarial environments requires simultaneous satisfaction of geometric constraints, logical consistency, temporal reasoning, and strategic optimization. Existing sheaf- and topos-theoretic frameworks provide powerful tools for geometric consensus, knowledge alignment, and causal planning, but lack explicit models for value, reward, and strategic choice. This report presents a unified categorical framework that integrates event calculus, SCEL-like ensemble formation, and game-theoretic reward structures into a single Grothendieck topos of time-space histories. We introduce the notion of a \emph{game sheaf} whose stalks contain utility functions and policy distributions, and restriction maps encode both parallel transport and best-response dynamics. We prove that Nash equilibria correspond to global sections of a derived best-response correspondence sheaf, while cohomological obstructions classify failures of strategic consistency. A detailed case study of an immunological ``bastion defense'' scenario -- heterogeneous agents forming attack/defense ensembles under resource constraints -- demonstrates the framework's expressiveness. This synthesis provides a rigorous foundation for verifiable, autonomic, and economically rational multi-agent systems.
arXiv:2606.01670v1 Announce Type: new
Abstract: Recently, Generative Recommenders (GRs) have emerged as a transformative recommendation paradigm by replacing traditional item IDs with semantic indices (SIDs). Owing to the exceptional generative capabilities of diffusion models, a few pioneering works explore developing GRs with diffusion architectures as the backbone. However, a fatal limitation of existing diffusion-based GRs is that the diffusion process applies uniformly to all items within the historical interactions. In contrast, the user preference is shaped by multifaceted time-evolving factors and thus exhibits a non-stationary distribution in the temporal aspect. To bridge this gap, this study proposes a novel GR framework, named TDPM, by designing the time-aware diffusion on SID tokens. Specifically, TDPM explicitly integrates the impact of time-evolving user preferences into the diffusion process. In detail, the user preference is disentangled into (i) the period preference, which remains consistent over a long time-span, and (ii) the point preference, which is triggered by recent focal events. Extensive experiments on three public real-world datasets demonstrate the significant superiority of TDPM over the state-of-the-art baselines. TDPM achieves average improvements of up to 29.21% and 25.45% in terms of HR@20 and NDCG@20, respectively. The ablation study further underscores the necessity of time-aware token diffusion in diffusion-based GRs.
arXiv:2606.01839v1 Announce Type: new
Abstract: LLM-based agents resolve a user task through many turns of dependent inference and tool calls, producing a workload whose total cost is unknown when the task arrives. Existing multi-turn systems keep the turn as the scheduling unit and decide, turn by turn, whether to disaggregate prefill from decode. That decision rests on the turn's decode length, tool behavior, and KV growth, quantities that are not observable when the scheduler must act, forcing the system to predict them. We show this dependence on prediction is imposed by the scheduling unit, not the workload. Raising the scheduling unit from the turn to the conversation converts turn-level irregularity into a stable, two-phase structure: 1) a compute-bound turn-1 prefill followed by 2) a long, memory-bound tail. Thus, with the conversation as the scheduling unit, placement reduces to reading the first-turn input length and per-decoder KV occupancy, both directly observable. We instantiate this principle in ConServe, which routes the first-turn prefill to a high-throughput prefiller, transfers the KV cache exactly once, and pins the conversation to a single decoder for its entire tail, with no learned model of decode-side cost. Against a per-turn prediction baseline, ConServe reduces p95 time-to-first-effective-token (the latency of a conversation's first user-visible output) by 51.08% and improves energy efficiency by 7.51% while preserving last-turn TBT and SLOs; mapping the two phases onto heterogeneous GPU tiers adds a further 22.75% in energy efficiency.
arXiv:2606.01845v1 Announce Type: new
Abstract: Although large language models (LLMs) have shown considerable progress in pragmatic language understanding, prior research has focused mainly on their comprehension of verbal behavior. Nonetheless, non-verbal behavior remains a fundamental component of human communication, especially when deliberately utilized in isolation to convey indirect meanings. In this work, we present the first systematic evaluation of LLMs' ability to infer pragmatic meaning in dialogue consisting solely of non-verbal responses. We explore three research questions: (1) Can LLMs recognize indirect intent conveyed through non-verbal responses? (2) When and how do LLMs fail to capture non-verbal intent? (3) How can we improve LLMs' ability to interpret non-verbal intent?. Through the evaluation, we observe that LLMs struggle to infer underlying meaning from non-verbal responses, with accuracy dropping by up to 60% points compared to verbal ones. Further extensive analysis reveals a behavioral pattern in LLMs' interpretations of non-verbal behavior and demonstrates that in-context learning facilitates pragmatic inference.
arXiv:2606.01777v1 Announce Type: new
Abstract: Transparent objects remain challenging for robotic perception due to unreliable depth sensing caused by refraction and reflection. While prior approaches rely on multi-view reconstruction or depth completion, they are often difficult to scale or deploy in real-world robotic systems. In this paper, we present a practical framework for transparent object perception and manipulation based on single-view RGB input. Our approach predicts voxel-space occupancy directly from a single image, providing a geometry-aware representation that supports downstream robotic grasping. To enable large-scale training, we construct a simulation pipeline that generates paired RGB images and voxel occupancy annotations under diverse materials and lighting conditions. We demonstrate that the predicted occupancy representation is robust to domain shifts and transfers effectively from simulation to real-world robotic setups without fine-tuning. A simple rule-based grasping strategy built on top of the occupancy further achieves reliable grasp performance on transparent objects. Extensive experiments in both simulation and real-world environments show that our framework provides accurate 3D understanding and enables practical manipulation of transparent objects. These results suggest that single-view occupancy prediction offers a scalable and effective solution for transparent object perception in robotics.
arXiv:2606.01339v1 Announce Type: new
Abstract: Long-term time-series forecasting needs models that are accurate yet efficient enough for commodity hardware. Lightweight linear forecasters are remarkably strong in this regime, yet they leave two openings: reversible instance normalization (RevIN) de-normalizes the entire horizon with a single lookback statistic, which is inaccurate under non-stationarity, and time-domain trend/seasonal decomposition relies on a fixed, non-adaptive filter. We present FreqLite, an ultra-lightweight, channel-independent frequency-decomposed linear forecaster: a learnable, lossless, partition-of-unity spectral filter splits the input into bands that are forecast by per-band linear heads and, unlike low-pass-truncation approaches, the high-frequency band is retained and modeled. FreqLite is the best lightweight model on the standard long-term forecasting benchmarks and, at long lookback (L=336), attains a lower average error than a PatchTST Transformer (0.3244 vs. 0.3587 MSE) while using 4x fewer parameters, 2.2x less memory, and 2.2x less time per epoch on a single 4 GB laptop GPU; although modest in magnitude, its improvements are statistically significant under paired Wilcoxon tests across all matched cells (p < 1e-5). We further introduce Adaptive Reversible Instance Normalization (A-RevIN), a regime-adaptive reversible normalization that strictly generalizes RevIN (recovered exactly when its gate is closed), engages under non-stationarity, and reduces to RevIN without harm on stationary data. We validate this on both a real strongly non-stationary dataset (ILI, up to ~5% MSE reduction) and a controlled synthetic drift sweep in which A-RevIN's benefit and its learned gate both rise monotonically with injected non-stationarity. Every component is independently ablatable (Linear and RLinear are special cases of FreqLite), and all results are reproducible on commodity hardware.
arXiv:2606.01871v1 Announce Type: new
Abstract: Immunohistochemistry (IHC)is frequently used to resolve diagnostically ambiguous prostate cancer biopsy findings on hematoxylin and eosin (H&E)-stained tissue. However, PIN-4 IHC staining is typically performed on adjacent tissue sections, limiting direct spatial comparison between the H&E morphology and the corresponding immunophenotypic signal. A paired, registered H&E/PIN-4 dataset was constructed from routine clinical prostate biopsy whole-slide images (WSIs), and a conditional generative adversarial network (cGAN) was trained to synthesize PIN-4 staining patterns directly from native H&E image patches. The final dataset comprised 172 paired WSIs from 93 patients and 27,298 registered 1024x1024 patch pairs, spanning adenocarcinoma-positive and benign cases with representation across age, race, and ethnicity groups. The model was evaluated on a held-out test set of 1,814 patch pairs from 17 WSIs, achieving a mean peak signal-to-noise ratio (PSNR) of 21.88 dB, structural similarity index measure (SSIM) of 0.667, Pearson correlation coefficient (PCC) of 0.684, and learned perceptual image patch similarity (LPIPS) of 0.417. Qualitative review by a board-certified pathologist showed that generated images captured diagnostically relevant PIN-4 staining patterns, including AMACR/racemase expression and basal-cell-associated staining, while preserving spatial correspondence with the source H&E morphology. Accuracy of synthesis varied across morphologically complex regions, including high-grade carcinoma and intraductal carcinoma. These results support the feasibility of supervised PIN-4 synthesis from routinely acquired brightfield H&E prostate biopsy images. The approach enables direct interpretation of predicted PIN-4 marker patterns in the context of the source prostate H&E architecture, addressing a current spatial limitation of conventional adjacent-section IHC.
arXiv:2606.02436v1 Announce Type: new
Abstract: Video world models aim to simulate controllable visual environments, but long-horizon rollouts depend on what the model remembers after observations leave its native context window. Explicit memories retain frames or online 3D reconstructions, which can suffer from heuristic retrieval errors, redundant appearance storage, or reconstruction artifacts. Implicit memories compress history into a compact state, but existing designs are not explicitly constrained to encode cross-view scene geometry. We propose GIM-World, a geometry-aware implicit memory framework for video world models. A lightweight transformer encoder compresses variable-length history into fixed-size memory tokens, a camera-queryable geometry head distills 3D scene structure from a frozen foundation model into the memory during training, and an information-guided pruning rule keeps encoding cost bounded as history grows. The geometry teacher is discarded at inference, leaving a lightweight memory module. Experiments on MIND show that GIM-World better preserves long-horizon geometric and visual consistency than both explicit- and implicit-memory baselines.
arXiv:2606.02488v1 Announce Type: new
Abstract: Multi-hop question-answering systems often use expensive retrieval on every question. They may decompose the question, run several retrieval rounds, or search through bridge entities before answering. All of these strategies rely on repeated LLM calls to rewrite or decompose the question, which increases extra token cost, and it is not fitting when the LLM budget is tight. However, our analysis shows that lots of multi-hop questions are already answered correctly by a single one-shot RAG, so running an extra retrieval on every question wastes the budget. We introduce RASER (Recoverability-Aware Selective Escalation Router), a family of cheap routers built on one-shot RAG and six features from it. RASER-2 decides whether to stop or escalate to the extra-retrieval action PRUNE. RASER-3 chooses among one-shot RAG, PRUNE, and iterative retrieval IRCoT, using the same features but adding an explicit cost-accuracy trade-off. Neither router makes an extra LLM call to decide. Across six LLMs and three multi-hop QA benchmarks, both routers stay competitive with the other state-of-the-art (SOTA) baselines in F1 while spending only 41-49% of always-prune's tokens and also less than the iterative and decomposition retrieval baselines.
arXiv:2606.02145v1 Announce Type: new
Abstract: Accurate prediction of polymerization dynamics is essential for process design, control, and optimization. Yet, purely mechanistic models require labor-intensive parameterization of partially characterized kinetics, while purely data-driven models demand large, diverse datasets that are costly to obtain, particularly in early-design stages. We propose a hybrid Neural Ordinary Differential Equation (NODE) framework for data-efficient modeling of free-radical polymerization. Using batch polymerization of methyl methacrylate (MMA) as a case study, the mechanistic mass balances are retained explicitly, and only the partially-characterized effective radical concentration governing monomer consumption is learned from data through a neural network surrogate, while established reactions such as initiator decomposition, propagation, and termination remain physically modeled. The hybrid NODE is evaluated against a discrete-time feedforward neural network and a purely data-driven NODE under sparse data conditions, with models trained on as few as ten measurements under both regular and irregular sampling. The hybrid NODE consistently achieves lower prediction errors and more physically consistent extrapolations than both purely data-driven baselines. In a generalization scenario with noisy data and unseen operating conditions, the hybrid NODE achieves an RMSE of 0.013, compared to 0.31 for the data-driven NODE and 0.68 for the discrete-time model, demonstrating that learning only a closure term rather than the full dynamics is sufficient for reliable prediction under limited data availability.
Multilingual Idioms in Sentences and Conversations Across High-, Medium-, and Low-Resource Languages
arXiv:2606.02147v1 Announce Type: new
Abstract: Idiomatic expressions pose a major challenge for multilingual NLP because their meanings shift between figurative and literal usage, often requiring context for accurate interpretation. Prior work has focused on high-resource languages typically evaluates isolated idiom-meaning questions, overlooking realistic discourse. We introduce MIDI, a multilingual idiom dataset spanning 3 high-, 3 medium-, and 12 low-resource languages, curated by native speakers. Unlike previous datasets, MIDI provides idioms embedded in both sentence-level and conversational contexts, capturing both literal and figurative readings. Benchmarking state-of-the-art models shows that idiom comprehension degrades in low-resource languages and that, in all resource tiers, literal interpretations are substantially harder than figurative ones. Conversational context improves performance but does not eliminate these disparities. Through controlled tests and interventions on hidden representations, we further separate memorization from reasoning, exposing core limitations of current models.
arXiv:2606.01814v1 Announce Type: new
Abstract: This paper is devoted to construction and convergence analysis of the linear explicit immersed finite element (IFE) function. For the interface elements, the proposed IFE functions precisely satisfy the interface conditions on the actual interface. The IFE functions are constructed in an explicit form and can be obtained directly without solving any auxiliary problems or local linear systems. Although the constructed IFE functions are non-polynomial, we establish rigorous theoretical analysis showing that they achieve optimal approximation properties and satisfy the essential trace inequalities. And the constants in the analysis are independent of how the interface cuts through the elements. Based on these IFE functions, an immersed discontinuous Galerkin numerical scheme is developed. Several numerical experiments are implemented to confirm that both the IFE functions and the numerical method achieve optimal convergence rates in the $H^1$ and $L^2$ norms. Furthermore, the numerical results indicate that the condition numbers of the stiffness matrices are robust with respect to the interface location.
arXiv:2606.01818v1 Announce Type: new
Abstract: Reliable driving scene parsing is a fundamental capability for autonomous vehicles operating in open and dynamic driving environments. However, adapting perception models to new deployment domains remains challenging because pixel-level annotations are expensive to obtain, while source-domain data are often inaccessible due to privacy, security, or ownership constraints. Existing source-free unsupervised domain adaptation methods typically rely on a single pre-trained source model, which makes the adapted perception system vulnerable to source-specific biases and limits its robustness under diverse road layouts, illumination conditions, weather patterns, and traffic conditions. This article presents an unsupervised collaborative domain adaptation (UCDA) framework for driving scene parsing in a source-free setting, which transfers complementary knowledge from multiple pre-trained source models to a unified target model without accessing any original source samples. To compare predictions from independently trained models, UCDA constructs a class-level prototype memory bank and estimates cross-model prediction reliability through prototype similarity, reducing the effect of inconsistent confidence scales across source models. Based on the resulting complementary supervision, UCDA adopts a two-stage transfer strategy: multiple source models are first refined on unlabeled target-domain driving data through collaborative optimization with positive and negative consistency constraints, and their validated expertise is then distilled into a single deployable target model. Comprehensive evaluations on public driving-scene datasets and real-world data collected from an autonomous vehicle platform demonstrate that UCDA effectively consolidates complementary multi-source knowledge, improving target-domain scene parsing reliability and generalization across diverse driving environments.
arXiv:2606.01860v1 Announce Type: new
Abstract: Traditionally, fusion reactivity in thermonuclear plasmas has been calculated by assuming a local Maxwellian ion distribution. However, recent theoretical work [Phys. Rev. Lett. 135, 155101 (2025)] suggests that turbulence in plasmas can generate non-Maxwellian tail distributions, thereby enhancing reactivity. In this paper, we investigate this effect through numerical simulations of a sinusoidal shear flow. By comparing steady-state distributions obtained with the Bhatnagar-Gross-Krook (BGK) and Fokker-Planck (FP) collision operators, respectively, we demonstrate that the BGK model overestimates the reactivity enhancement while the FP operator gives a much more modest enhancement that is nearly halved under typical ICF parameters. Particle-in-cell (PIC) simulations incorporating nuclear reactions are also conducted, which reveal that the combined effects of preferential ion heating during shear flow dissipation and tail enhancement can even amplify the reactivity enhancement to be larger than the steady-state prediction.
arXiv:2606.02001v1 Announce Type: new
Abstract: General agentic intelligence hinges on the ability to interact with diverse real-world tools to complete complex tasks, a capability fundamentally tied to the quality of interaction data. To bypass the prohibitive costs of human annotation, prevailing paradigms depend entirely on Large Language Models (LLMs) to scale the synthesis of agentic environments and tasks. However, such unconstrained generation often degenerates into biased random sampling of LLMs' internal priors, failing to capture the diversity and difficulty of real-world domains or construct high-fidelity, long-horizon tasks. In this work, we introduce Grounded Agentic Interaction Synthesis (GAIS), a framework that automates the scalable construction of diverse environments and complex tasks via a two-phase grounding mechanism. Specifically, we construct protocol-anchored environments derived from real-world Model Context Protocol (MCP) servers to ensure functional diversity and difficulty. Subsequently, we employ structure-guided planning to navigate these environments, actively enforcing logical dependencies and adversarial policies to generate complex tasks. Experiments on BFCL, $\tau^2$-Bench, and ACEBench demonstrate that GAIS-synthesized data significantly outperforms state-of-the-art baselines, enabling base models to match or even surpass their official instruction-tuned counterparts. Furthermore, GAIS exhibits superior data efficiency and scalability, achieving exceptional capabilities with significantly less data while maintaining continuous growth where baselines stagnate. Our code and dataset are publicly available at https://github.com/Eric8932/GAIS.
arXiv:2606.02148v1 Announce Type: new
Abstract: We report on the development, construction, and integration of a remote automation controller \texttt{NA64-DTC} for the so-called ``DESY Table'' motorised platform widely used at CERN East-Area and North-Area experimental installations. The device is based on an ESP32-C3 System-on-Module that interfaces with the table manual control panel via a signal duplication connector. Button presses are emulated through opto-isolated switches, to allow for simultaneous operation with the manual system without modifying the original hardware. A \texttt{HTTP} server running on the controller allows interfacing with the device, enabling experiment-specific integration solutions. \\ The device was successfully commissioned at CERN, exploiting the experimental installations at PS-T9 and SPS-H4 beamlines. This work describes in detail the device technical design and operation, as well as the performance obtained during the commissioning operations. Although initially conceived for the NA64 experiment, the proposed solution can be of interest to all CERN experiments making use of the DESY Table platform, enabling remote and automated operation while reducing manual intervention during beam activities.
arXiv:2606.02153v1 Announce Type: new
Abstract: Methods using inertial measurement units (IMUs) provide a wearable alternative to camera-based motion capture. To mitigate drift from inertial signals, recent sparse inertial pose estimators integrate inter-sensor distances measured by ultra-wideband (UWB) ranging. So far, UWB distances have only been used as an additional input feature, ignoring the physical constraints they impose on sensor positions. However, these distances can also be used to reconstruct the underlying 3D sensor layout, which in turn provides more informative input for pose reconstruction. We propose Ultra Diffusion Poser, a diffusion model that explicitly models these geometric constraints. It includes a Spatial Layout Module that analytically reconstructs the 3D sensor positions from UWB measurements. These sensor positions are used alongside IMU signals and UWB distances as a conditioning signal during diffusion. Still, network predictions can violate inter-sensor distance measurements. To address this, we introduce UWB-Diffusion Guidance, which encourages alignment between predicted poses and measured distances during diffusion sampling. Together, these contributions enable our model to achieve state-of-the-art performance, reducing joint position error by up to 22% over prior work.
arXiv:2606.02222v1 Announce Type: new
Abstract: This paper explores the design of multibeam metasurface (MTS) antennas excited by multi-directional plane-wave launchers. First, we solve the fundamental yet open problem of a plane surface wave (SW) that propagates obliquely to the modulation direction of a sinusoidally modulated MTS. Closed-form expressions are provided to accurately predict the beam pointing angles for any propagation direction of the illuminating plane SW and for any Floquet harmonic. Then, the proposed formulation is used to design a highly directive multibeam MTS antenna at K-band with linear polarization. The designed antenna combines an MTS and a pillbox quasi-optical beamformer arranged in a very compact space. A pillbox is a double-layer structure that embeds a reflector coupled to multiple primary feeds in the lower layer. The beams launched by the primary feeds are thus transformed into plane waves with different directions in the upper layer. Printing a modulated MTS in the upper layer results in a low-profile, multibeam antenna suitable for PCB fabrication. Experimental results validate the proposed formulation. The fabricated MTS antenna exhibits a maximum directivity of 30.5 dB and a 17.5% fractional -3 dB directivity bandwidth over the 19.7-21.7 GHz band. By switching feeds and modifying the operating frequency, the scanning range is [$3^o$,$35^o$] in elevation and [$-76^o$,$+76^o$] in azimuth. Additionally, different antenna designs are included that demonstrate the validity and generality of the derived formulation. The proposed multibeam concept can be exploited in satellite communications and 5G/6G networks.
arXiv:2606.02223v1 Announce Type: new
Abstract: Estimating the generative mechanism of large-scale networks is a fundamental challenge in statistical machine learning. It requires the identification of the latent connectivity structure, which is in general an NP-hard combinatorial problem due to the absence of canonical node labels. We address this challenge by allowing for probabilistic couplings, thereby relaxing the assignment problem. Our estimation framework can be formulated as a semi-relaxed Gromov-Wasserstein objective and provides a low-dimensional representation of the generative structure. We solve this via a block-coordinate conditional gradient algorithm. Despite the relaxation, the resulting solution is typically deterministic: in fact, we show that the optimality gap between the relaxed solution and the deterministic assignment vanishes at rate $O(1/n)$, where $n$ is the number of nodes. This allows for tractable recovery of the underlying model and enables rigorous statistical analysis: we establish consistency and minimax-optimal convergence rates for both stochastic block models and Holder-smooth graphons. Our implementation scales efficiently with $n$, as demonstrated on both synthetic and real-world datasets.
arXiv:2606.02232v1 Announce Type: new
Abstract: Learning a Markov transition model is not merely conditional density estimation: the learned object must be a valid transition kernel before it is iterated in downstream dynamics. This paper introduces a Doeblin-anchored contrastive chart, a statistical-to-dynamical coordinate framework for learning transition kernels from contrastive objectives. Given a restart law and an anchor strength, the chart mixes the target transition with the restart law. The resulting anchored kernel is simultaneously a Doeblin-minorized Markov kernel, the positive conditional law in a binary contrastive experiment, and an explicitly invertible coordinate for the original transition law. We prove that the anchored contrastive risk identifies the anchored transition density and calibrates excess risk to density error. Since inversion of a learned score may produce a signed or unnormalized object, we introduce a measurable Markovization operator that restores kernel validity while preserving integrated $L^1$ accuracy up to a constant factor. Oracle inequalities and H\"older--ReLU approximation bounds yield nonparametric rates for independent transition pairs. For stationary geometrically $\beta$-mixing trajectories, a conservative thinning-and-coupling extension yields the same reconstruction interface with an effective sample size. Occupancy-weighted perturbation bounds transfer one-step kernel error to finite-horizon marginal, path-law, and occupation-measure errors under explicit coverage.
arXiv:2606.02307v1 Announce Type: new
Abstract: Vision-Language-Action (VLA) models are increasingly used as generalist robot policies, yet their evaluation still relies largely on static benchmarks that randomly sample task scenes. In high-dimensional embodied spaces, failures are sparse and clustered, so static benchmarking can underestimate robustness risks. We reframe VLA evaluation as an active failure-discovery problem and propose a failure-aware test-generation approach that combines diversity-driven exploration with surrogate models learned from observed executions. The method steers testing toward high-risk yet diverse scene regions. Across four state-of-the-art VLA models, it uncovers substantially more failures (up to +29.7 % over selected baselines) while revealing more diverse failure modes. This mean that, for instance, in the case of GR00T-N1.6, success rate dropped from 64.4% to 34.7%. More broadly, our findings call for a shift in VLA evaluation: from passive measurement on fixed task suites to adaptive, failure-seeking test generation that exposes the structure of model weaknesses before deployment.